Yamaha S70 Руководство пользователя

S90 XS/S70 XS Editor Owner’s Manual 1

Contents

What is the S90 XS/S70 XS Editor? ........................................2

Studio Manager ........................................................................2

Studio Connections .................................................................2

About Open Plug-in Technology .............................................3

Data Structure of the S90 XS/S70 XS Editor ..........................4

Starting the S90 XS/S70 XS Editor..........................................5

An Example of S90 XS/S70 XS Editor in Use.........................6

S90 XS/S70 XS Editor Window ..............................................12

Basic Operations....................................................................34

Menu ........................................................................................36

Troubleshooting .....................................................................52

• Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly prohibited except for

your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without

the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot

be held responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat

different from the screens which appear on your computer.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their

respective companies.

• Click on the red-colored text to jump to the related item in this manual.

This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not,

please refer to the owner’s manual which came with your Windows/Macintosh software before using the S90 XS/S70

XS Editor.

For information about hardware requirements, the interconnection of devices and the installation of the S90 XS/S70

XS Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI

device.

S90 XS/S70 XS Editor

Owner’s Manual

S90 XS/S70 XS Editor

Owner’s Manual

What is the S90 XS/S70 XS Editor?

S90 XS/S70 XS Editor Owner’s Manual

2

What is the S90 XS/S70 XS Editor?

S90 XS/S70 XS Editor is a convenient tool which lets you edit and save the various parameters of your S90

S90 XS/S70 XS Music Synthesizer. These include Voice and Mixing parameters (edited in the Voice or Multi

mode of the S90 XS/S70 XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-

understand graphical interface, you can edit various parameters of the S90 XS/S70 XS right from your

computer—using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the

computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to

the S90 XS/S70 XS instrument.

You can use this S90 XS/S70 XS Editor as a plug-in for the software below

• Studio Manager

•DAW application software compatible with Studio Connections

Studio Manager

Studio Manager V2 is a cross-platform application that enables you to start multiple Editors for controlling

Yamaha hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a

stand-alone application, or as a plug-in within DAW applications compatible with Studio Connections such

as Cubase 4 or Cubase AI 4.

For more information, refer to the Studio Manager PDF manual.

Studio Connections

Studio Connections is a joint project begun by Steinberg and Yamaha. Music

production systems now increasingly rely on both software and hardware, and there

is a pressing need for closer integration between the two. Studio Connections

provides a comprehensive and seamless music production environment—making the

use of hardware and software both easier and much more efﬁcient. The following

functions are available in Studio Connections.

Recall

With the Recall function, all settings in each Editor can be saved within Studio Manager, and then called up

again when needed. This enables you to recall all the settings of multiple devices from Studio Manager and

control the entire system easily, instantly and automatically.

Recall is especially convenient when used with a DAW application compatible with Studio Connections. This

lets you save the Editor data directly to the project ﬁle of the DAW letting you recall all necessary hardware

settings automatically by simply opening the project ﬁle.

When executing the Recall function in the Studio Manager, the parameter settings of either device (S90 XS/S70 XS or DAW

software on a computer) are synchronized with the other. You can determine which device (S90 XS/S70 XS or DAW software) is

regarded as the master of the parameter settings by setting the Auto Sync Setting (page 40).

About Open Plug-in Technology

S90 XS/S70 XS Editor Owner’s Manual

3

Audio Integration

Plug-in software such as software synthesizers and software samplers are exceptionally convenient in that

they let you easily change the various settings and parameters within the host application. However, control

over hardware is not so easy—with the need for various setups such as audio connections, driver settings

and MIDI port connections.

By using a Studio Connections-compatible DAW software, you can control the external hardware synthesizer

within the application, without the need to set up complex connections within a DAW software application—

just as easily and conveniently as you would with plug-in software. The Audio Integration function makes all

this possible. For details about Recall and Audio Integration, visit our web site at:

http://www

.studioconnections.org/

About Open Plug-in Technology

Open Plug-in Technology (OPT) is a software format that enables you to control MIDI devices from a music

DAW application software. For example, this allows you to start up and operate various parts of your music

system, such as voice editors of the synthesizer and mixing control editors—directly from an OPT-compatible

software, without having to use each separately. OPT also makes it unnecessary to set MIDI drivers for each

application, streamlining your music production system and making all operations more convenient and

seamless.

In addition to the original OPT, Open Plug-in Technology Version 2 (OPT 2), designed for Studio Connections,

is also available. The host application Studio Manager supports OPT 2.

About the OPT 2 Overview

OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient

functions for Studio Connections.

Plug-in software compatible with OPT 2 is indirectly

connected to the DAW application compatible with

Studio Connection, via the Studio Manager.

Editor

Host

Application

Editor

OPT2

Studio

Manager

Data Structure of the S90 XS/S70 XS Editor

S90 XS/S70 XS Editor Owner’s Manual

4

Data Structure of the S90 XS/S70 XS Editor

The S90 XS/S70 XS Editor lets you create the following data and save them as a single ﬁle (extension: .X2E).

• Global data (latest status of edited global parameters)

• Current data in the Voice mode (latest status of edited Voice)

• Current data in the Multi mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)

• User Voice data (consisting of four Normal Voice Banks and one Drum Voice Bank)

Current settings include the latest settings of the Common and Element parameters for the Voice last assigned to

each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for

each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The S90 XS/

S70 XS Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and

save the latest edit status as a ﬁle without storing it as a User Voice or a Mixing Voice. This means that you can

easily recall the latest status of the previous edit simply by opening the ﬁle.

n The S90 XS/S70 XS Editor VST handles the Global data which includes some of the parameters shown on the “G” row in

the Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 21 and 24).

The diagram illustrated below indicates the structure of the data created via the S90 XS/S70 XS Editor, the

structure of the data stored in the internal memory of the S90 XS/S70 XS instrument and the relationship between

those two types of data.

*1 When the S90 XS/S70 XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the S90 XS/S70 XS Editor affects the same parameter on

the S90 XS/S70 XS itself, and vice versa.

*2 The Store Voice operation on the Editor will store the Voice data to the memory of the S90 XS/S70 XS instrument as well as the memory of the Editor.

*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the S90 XS/S70 XS instrument.

As illustrated S90 XS/S70 XS Editor lets you save the current settings of all the parameters as well as the User

Voice data and Mixing Voice data consisting of the same Voice Banks as those of the S90 XS/S70 XS instrument to

a single ﬁle. Because the current settings of all the parameters are saved to the ﬁle even if they were not stored as

a User Voice or Mixing Voice, you can recall the last editing status simply by starting the S90 XS/S70 XS Editor.

S90 XS/S70 XS Editor (computer)

Global data

Current data in the Voice mode

Current data in the Multi mode

• Multi Common data

Part Voice data

(16 Voices)

Mixing Voice data

(16 Voices)

Store Voice

*2

(page 47)

Store Voice

*2

(page 47)

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Normal User 4 (128 Voices)

• Drum User (32 Voices)

Editor ﬁle

(Extension: .X2E)

Data sync

*1

Data sync

*1

Data sync

*1

Global data

Current data in the Voice mode

Current data in the Multi mode

• Multi Common data

Global data

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Normal User 4 (128 Voices)

• Drum User (32 Voices)

Part Voice data

(16 Voices)

Multi data

• Multi Common data

Mixing Voice data

(16 Voices)

Store Voice

*2

(page 47)

Store Voice

*2

(page 47)

Store Voice

*2

(page 47)

Store Mixing

*3

(page 48)

Store Global

*3

(page 47)

S90 XS/S70 XS instrument

Store Voice

*2

(page 47)

Starting the S90 XS/S70 XS Editor

S90 XS/S70 XS Editor Owner’s Manual

5

Starting the S90 XS/S70 XS Editor

Install the driver USB-MIDI Driver, Studio Manager and S90 XS/S70 XS Editor by following the respective

Installation Guides, then install the host application such as Cubase if necessary. After making the required

connection and setting the MIDI IN/OUT parameter to “USB” in the Utility mode, follow the instructions below

to start the S90 XS/S70 XS Editor.

n For details about connection between the S90 XS/S70 XS and a computer, refer to the Owner’s Manual of the S90 XS/

S70 XS.

1. Start the Studio Manager.

Studio Manager can be started as a plug-in within a Studio Connections-compatible DAW software, or

can be started as a stand-alone application.

2. Set the MIDI Ports.

When starting Studio Manager as a stand-alone application:

Set the MIDI Ports by calling up the MIDI Ports window via [File]

→

[Setup]

→

[MIDI Settings]. When the

connection is done via a USB cable, enter the checkmarks to the boxes of Por ts 1 and 4 for the S90 XS/S70

XS in both the Input Ports and the Output Ports, as illustrated below.

n A MIDI Thru function is available on Studio Manager version 2.3.0 or later. This new feature lets you transmit

note on/off messages from the MIDI keyboard to the S90 XS/S70 XS instrument through the computer

(without starting the DAW software), letting you hear the sound of the edited Voice by playing the keyboard.

When starting Studio Manager as a plug-in:

Set the MIDI Ports on the DAW application. For details, refer to the manual of your DAW application.

When connecting the S90 XS/S70 XS to a computer via a USB cable, the MIDI Ports are automatically

set simply by starting Studio Manager from Cubase 4.5 or Cubase AI 4.5.

3. Start the S90 XS/S70 XS Editor from the window of the Studio Manager.

For details, refer to the Installation Guide and the PDF manual of the Studio Manager.

When using Studio Manager as a plug-in with the Audio Integration features of Studio Connections

(within a compatible DAW), you can start the S90 XS/S70 XS Editor just as any other software

synthesizer. For details, visit the following web site.

http://www.studioconnections.org/

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

6

An Example of S90 XS/S70 XS Editor in Use

There is no single way to use the many components in the S90 XS/S70 XS Editor. Your editing needs and

preferences may differ; however, the following example gives you a simple step-by-step guide in how to use

the S90 XS/S70 XS Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a

Mixing program in the Multi mode, then store the edited data to the memory of the S90 XS/S70 XS instrument

and save the ﬁnal results of your editing to a ﬁle.

n If the [Multi] indication (at the top left of the display) is on, perform the instructions below from step 1. If the [Voice]

indication is on, perform the instructions below from step 2.

1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left

of the display).

If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync

window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you

should proceed to step 3.

2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]

indication is set to [OFFLINE].

3. On the Auto Sync window, set communication-related parameters such as Input Port,

Output Port and Device Number in the Data Port section, then set the direction of Data

Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.

When you want to use the settings on the S90 XS/S70 XS itself as starting data for editing, set the boxes

of Global, Current and Voice in the Auto Sync Setting to on so that the data ﬂows from the instrument to

the computer. To use the settings on the S90 XS/S70 XS Editor as starting data, set both Global, Current

and Voice to the opposite, so that the arrow indicates data ﬂow from the computer to the keyboard. For

details, see page 39.

CAUTION

Keep in mind that when you set Global, Current and User Voice to On, enable data sync from the computer to the S90 XS/

S70 XS (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on

the Editor to the S90 XS/S70 XS itself, automatically overwriting and erasing all the corresponding data already existing on

memory of the S90 XS/S70 XS instrument. When you want to use the settings on the S90 XS/S70 XS itself as starting data

for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data ﬂows from the

instrument to the computer.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

7

CAUTION

Regarding the data transfer for synchronization, the setting here takes precedence over that speciﬁed in Studio Manager.

Make sure to set the desired data transfer direction, regardless of the setting on the Studio Manager, in order to avoid data

loss.

4. From the Auto Sync window, click [Start] at the bottom.

The data synchronization will be started if the Port settings are correct. As soon as data synchronization

is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE

indication automatically. In this ONLINE status, editing a parameter on the S90 XS/S70 XS Editor affects

the same parameter on the S90 XS/S70 XS itself, and vice versa.

5. Edit the Voice in the Voice mode.

5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the

VOICE LIBRARY window.

5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to

the current Part.

You can conﬁrm the sound of the selected Voice by clicking any note on the virtual keyboard or the S90

XS/S70 XS keyboard.

5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY

window.

You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of

the window. By executing this operation, the Voice selection is reset to the original status and the VOICE

LIBRARY window closes.

CAUTION

When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the

edits, make sure to store the Voice by using the Store window (page 47) before changing the Voice.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

8

5-4 Edit the Voice parameters as desired.

Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.

To conﬁrm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the

S90 XS/S70 XS keyboard.

To make detailed settings of the selected Voice, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

6. Store the edited settings as a User Voice, as necessary.

6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 47).

6-2 Select a Voice Bank from the following list:

• Normal User 1

• Normal User 2

• Normal User 3

• Normal User 4

• Drum User

n Normal User 1 – 4 are shown in the Store window when editing the Normal Voice while Drum User is shown in

the Store window when editing the Drum Voice.

6-3 Open the selected Bank, select the desired number as destination, then enter the name

of the Voice in the box at the top of this window.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

9

6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.

Performing this operation will store the Voice data to the User Voice Bank in the S90 XS/S70 XS

instrument as well as that within the Editor.

CAUTION

When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be

overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally.

n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu

bar.

7. Edit the Mixing parameters in the Multi mode.

7-1 Change the mode to the Multi mode by clicking [Multi] of the [Voice]/[Multi] indication.

The Auto Sync window appears automatically.

7-2 From the Auto Sync window, click [Start] at the bottom.

Data synchronization will be started if the Port settings are correct. As soon as data synchronization is

completed, the Auto Sync window is closed.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

10

7-3 On the “G” row of the Global/Multi section, click the Multi name or Voice name to call up

the MULTI LIBRARY window.

The MULTI LIBRARY lists the Multi programs which is stored in the S90 XS/S70 XS instrument when the

S90 XS/S70 XS Editor is in ONLINE status. You can call up the Multi setup simply by selecting one of

these listed template programs.

n The MULTI LIBRARY is not available when the S90 XS/S70 XS Editor is in “OFFLINE” status.

7-4 From the list in the MULTI LIBRARY, select the desired Multi program to be edited.

All the Multi parameters such as the Voice assignment to Part 1 – 16 are set automatically only via this

operation.

7-5 Edit the parameters of the Mixing and Voice assigned to each Part.

If you want to change the parameter values from the original ones of the selected Multi, click (drag and

drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/Multi section

and “1” – “16” in the Part section.

To conﬁrm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the

S90 XS/S70 XS keyboard.

To make detailed settings of the selected Multi, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n The S90 XS/S70 XS Editor lets you edit the Voice parameters in the Multi mode as well as Voice mode. In the

Voice mode, you can edit only the selected Voice. In the Multi mode, on the other hand, you can edit the

parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited Voice can be

stored to the same Voice Bank as a User Voice regardless of the mode used for editing.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

11

8. Store the edited Voice or a Multi, as necessary.

8-1 Select the [Store Mixing] under the [Edit] menu to store the edited Multi.

n You can also store the edited Multi with the Store operation on the S90 XS/S70 XS instrument. For details,

refer to the Owner's Manual of the S90 XS/S70 XS.

8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in

the menu bar to call up the Store window (page 47) then store the Voice via the same

operations as in steps 6-1, 6-2, 6-3 and 6-4.

9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a ﬁle

(extension: *.X2E).

All the settings you made and the Voice data you stored to the User Banks will be saved as a single ﬁle

(extension: X2E). When you open this ﬁle next time to call up the Auto Sync window, click [Start] to

synchronize the status of the parameter settings between the S90 XS/S70 XS Editor and the S90 XS/S70

XS instrument.

• When starting the S90 XS/S70 XS Editor from Studio Manager, you can save the S90 XS/S70 XS Editor

data into a Session ﬁle of Studio Manager.

• When using DAW (digital audio workstation) software compatible with Studio Connections and the

Studio Manager together, the S90 XS/S70 XS Editor data can be saved into a project ﬁle of the DAW.

S90 XS/S70 XS Editor Window: Overall section

S90 XS/S70 XS Editor Owner’s Manual

12

S90 XS/S70 XS Editor Window

Overall section

1 File, Edit, Bulk, Help

Refer to page 36.

2 Voice/Multi mode

Determines the mode of the S90 XS/S70 XS, Voice or Multi. As soon as “Voice” or “Multi” is selected

here, the mode of the S90 XS/S70 XS instrument changes accordingly and the Auto Sync window

(page 51) opens. After setting parameters as necessary on this window, click [Start] to execute data

synchronization between the S90 XS/S70 XS Editor and the S90 XS/S70 XS instrument.

3 ONLINE/OFFLINE

Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is

indicated, the edited status is completely synchronized between the S90 XS/S70 XS Editor and the S90

XS/S70 XS instrument, meaning that any parameter edit you make on the S90 XS/S70 XS Editor is

reﬂected in the same parameter on the S90 XS/S70 XS instrument and vice versa. When OFFLINE is

selected, editing on the S90 XS/S70 XS Editor will not affect the S90 XS/S70 XS instrument and vice

versa even if the S90 XS/S70 XS instrument is connected to a computer.

Note that the indication here is automatically changed according to the status of communication

between the S90 XS/S70 XS Editor and the S90 XS/S70 XS instrument. For example, the ONLINE status

changes automatically to OFFLINE when the cable is disconnected accidentally.

1

Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below.

Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the

S90 XS/S70 XS instrument is not properly connected to a computer.

2

This OFFLINE indication shows that the MIDI Port is set properly and the S90 XS/S70 XS is properly

connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you

can synchronize the settings between the S90 XS/S70 XS Editor and the S90 XS/S70 XS by clicking the

[Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the

status of the Editor changes from OFFLINE to ONLINE.

n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync

window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync

window.

3

This OFFLINE indication shows that the MIDI Port is not set properly or the S90 XS/S70 XS instrument is not

connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to

connect the S90 XS/S70 XS instrument to a computer, set the MIDI Port properly then click the [Start]

button in the Auto Sync window to execute data synchronization between the S90 XS/S70 XS Editor and

the S90 XS/S70 XS instrument. As soon as data synchronization is completed, the Auto Sync window is

closed and the status of the Editor is changed from OFFLINE to ONLINE.

1

2

3

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

13

Mixer section (when the Voice/Multi is set to “Voice”)

1 Global

This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G”

turns this section on as illustrated below.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a ﬁle. This indication is the same as the green [F] indicator

(page 29).

Ins.FX (Insertion Effect)

Turns the Insertion Effect on or off.

Chorus

Turns the Chorus on or off and selects the Chorus type.

Reverb

Turns the Chorus on or off and selects the Reverb type.

MFX (Master Effect)

Turns the Master Effect on or off and selects the Master Effect type.

MEQ, Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)

Turns the Master EQ on or off and edits the parameters.

Volume

Adjust the entire volume.

2 [Voice]/[AD Part] tab

Selects the Parts to be edited from [Voice] and [AD Part]. The illustration below indicates that the [Voice]

tab is active.

1

3

2

Before editing

After editing

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

14

3 Voice

When the [Voice] is selected:

Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.

n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”

box until you save the edited data as a ﬁle or you store the edited data as a Voice. This indication is the same

as the blue [V] indicator (page 29).

n The MIDI monitor mark is at the left side of the “V” mark. A small red LED lights when MIDI messages are

received.

Category, Bank No., Voice Name

Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window

appears at the right half section, letting you select a different Voice for editing.

VOICE LIBRARY

1 Close button

Click this to close this window without applying the changes to the S90 XS/S70 XS Editor.

2 [Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices listed here are divided into Category

folders or Bank folders.

Before editing

After editing

19

3

4

5

2

67

8

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

15

3 [+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to

close all folders.

4 Folder (Category or Bank)

Click each folder to open or close it.

5 Voices

Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When

double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the

Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by

dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-

dropping the Voice(s) to a new location.

A checkbox exists at left of each Voice. If you enter checkmarks to the checkboxes of your most-used

or favorite Voice, you can call up a list of these Voices on the VOICE LIBRARY by setting the [Favorites]

checkbox to on.

n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as

normal on your computer OS.

n By right-clicking this section and selecting a menu, you can use the following functions.

• Opening/closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders.

• Copying/pasting

• Changing the Voice name

• Deleting all the checkmarks of the Favorites checkboxes at left of the Voices

6 Search Box

You can search for your desired Voice by inputting a keyword here.

7 [Favorites] checkbox

By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE

LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the

appropriate checkboxes at the left of each Voice.

8 [OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit

without applying the Voice selection.

9 [Refresh] button

When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the S90 XS/S70 XS

itself, the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the

S90 XS/S70 XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for the current Voice.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using

the graphic knobs.

Volume

Adjusts the volume of the current Voice.

ARP (Arpeggio)

Turns Arpeggio playback on or off for the current Voice.

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

16

When the [AD Part] is selected:

This section lets you edit parameters for the A/D Part in the Voice mode. Clicking “AD” row turns this

section on as illustrated below.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part in the Voice

mode by using the graphic knobs.

Volume

Adjusts the Volume for the A/D Part.

Output Select

Determines the speciﬁc output(s) for the A/D Part.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

asL ASSIGNABLE OUTPUT L Mono

asR ASSIGNABLE OUTPUT R Mono

vocoder Insertion Effect for Part 1

-

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

17

Mixer section (when the Voice/Multi is set to “Multi”)

1 Global

This strip lets you edit the main parameters in the Multi mode, such as effect-related ones. Clicking “G”

turns this section on as illustrated below.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a ﬁle. This indication is the same as the green [F] indicator

(page 29).

1

3

2

Before editing

After editing

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

18

Multi program

At the right of the “G” indication, the name of the Multi program which includes the parameter settings for

all the Parts 1 – 16 is shown when the [Part 1-16] tab (

page 19

) is selected. Clicking the Multi program

name will call up the MULTI LIBRARY which lets you select the desired Multi program.

MULTI LIBRARY

1 Close button

Click this to close this window without applying the changes to the S90 XS/S70 XS Editor.

2 [+]/[–] buttons

Click the [+] button to open all the folders so that all Multi programs appear in all folders. Click the [–]

button to close all folders.

3 Multi programs

Indicates the Multi programs included in the folder. When pressing the [OK] button after clicking or

double-clicking on a Multi, the Multi is actually selected and this window closes.

n By right-clicking this section and selecting a menu, you can use the following function.

• Opening/closing all the folders

4 Search Box

You can search for your desired Multi by inputting a keyword here.

5 [OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit

without applying the settings.

6 [Refresh] button

When the MULTI LIBRARY is shown in the Editor and you store the Multi(s) on the S90 XS/S70 XS itself,

the name(s) of the Multi(s) in the MULTI LIBRARY may be different from the Multi name(s) on the

S90 XS/S70 XS. If this happens, click this button to update the Multi names of the MULTI LIBRARY.

Ins.FX (Insertion Effect)

Switches the Insertion Effect on or off.

Chorus

Turns the Chorus on or off and selects the Chorus type.

Reverb

Turns the Chorus on or off and selects the Reverb type.

MFX (Master Effect)

Turns the Master Effect on or off and selects the Master Effect type.

MEQ, Lo, Lo-M, Mid, Hi-M, Hi (Part EQ)

Turns the Master EQ on or off and edits the parameters.

Volume

Adjusts the entire volume.

2

1

3

4

5

6

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

19

2 [Part 1-16]/[AD Part] tab

Selects the Parts to be edited from [Part 1-16] and [AD Part]. The illustration below indicates that the

[Part 1-16] tab is selected.

3 Part

When [Part 1-16] is selected:

This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part

on. In the example illustration below, Part 1 is active.

n When editing any of the Voice parameters such as Element parameters for each Part, a small square

appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice

or you save the edited data as a ﬁle. This indication is the same as the blue [V] indicator (page 29).

Part (Part number)

Indicates the Part number. Clicking here turns the corresponding Part on.

n In some situations, selecting a Part number on the Editor may not change a Part number on the S90 XS/S70

XS and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you

want to match the Part number of the S90 XS/S70 XS with the one in the Editor, change the Part number via

the panel controls of the S90 XS/S70 XS.

Mute/Solo

1 Mute

Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts

simultaneously.

2 Solo

Selects the Solo Part. Only one Part can be soloed at a time.

Category, Bank, No., and Voice Name

Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the

VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the

current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to

page 14.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for each Part.

Ins.FX (Insertion Effect Switch)

Switches the Insertion Effect on or off.

n Insertion Effects can be applied up to eight Parts.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the

graphic knobs.

Volume

Adjusts the Volume for each Part.

12

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

20

Rcv Channel (Receive Channel)

Determines the MIDI Receive Channel for each Part.

Output Select

Determines the speciﬁc output(s) for the individual Part. The following settings are available.

* When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be

output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is

indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select

parameter on the S90 XS/S70 XS Editor.

ARP (Arpeggio)

Turns Arpeggio playback on or off for each Part.

n Up to four Parts can play back the Arpeggio simultaneously.

When [AD Part] is selected:

This section lets you edit parameters for the A/D Part in the Multi mode. Clicking “AD” row turns this

section on as illustrated below.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part by using the

knob icons.

Volume

Adjusts the Volume for the A/D Part.

Output Select

Determines the speciﬁc output(s) for the A/D Part. The available settings are the same as those of the

A/D Part in the Voice mode. Refer to page 16.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

drum See below* See below*

Страница загружается...

Yamaha S70 Руководство пользователя

Похожие модели бренда