EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
RU
ЭЛЕКТРИЧЕСКИЕ ВСТРАИВАЕМЫЕ ПЕЧИ
ИНСТРУКЦИИ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И ОБСЛУЖИВАНИЮ
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
1
PRODUCT LABEL
2
CONTENTS PAGE
General warnings
4
Description of the product
7
Control panel
8
User guide for oven
10
Electronic R programmer instructions (MODELS FI-64/74 MTR-WTR)
11
Electronic programmer B (MODELS FI-64/74 MTB-WTB)
13
Touch control o instructions (model FI-64/74 MTLO)
15
Programmer N instructions (model FI-64/74 MTLN)
19
11 function full touch electronic programmer instructions (model FI-64/74
MTLM)
22
Oven functions
35
Maintenance and cleaning
38
Removal/assembly of the lateral guides
41
Removing/mounting the sliding guides (if any)
42
Replacing the oven light bulb
43
Instructions for installation
43
Inserting the oven into the cabinet
44
Oven electrical connection
45
Assembly/replacement of the power supply cable
45
Earth connection
46
Technical after-sales assistance and spare parts
46
Tabelle dati tecnici
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
3
MODELS FI-64 – FI-74
(E) Static
(W) 5 functions
(M) 9 functions
(MTO) 11 functions
(MTM) 11 functions
(MTN) 9 functions
(MTN) 5 functions
TYPE OF PROGRAMMING
(CM) Mechanical timer
(PSC) Mechanical programmer for cooking end time
(OR) Analogue cooking end programming clock
(BT5) Mini electronic programmer
(BT6) Standard electric programmer
(MTO) 11 function full touch electronic programmer
(MTM) 11 function electronic programmer
(MTN) Noalia 9 function electronic programmer
(MTN) Noalia 5 function electronic programmer
4
GENERAL WARNINGS
Warnings
This appliance is marked in
compliance with the European
Directive 2012/19/EU.
The crossed bin symbol indicates
that the waste product must be disposed of
separately from household waste. Take the
product to a separate collection centre for electric
or electronic appliances or face the penalties
provided for by current waste management
legislation, or take it back to the dealer when
purchasing a new equivalent appliance.
For more detailed information, contact the local
waste disposal service or the dealer.
Dispose of the various packaging materials in
compliance with the applicable local Standards.
Installation must only be carried out by qualied
staff in compliance with the local regulations
in force and following the indications in this
manual.
The manufacturer declines all civil and criminal
liability in the case of decient or improper
installation of the appliance.
The manufacturer also reserves the right
to make modications to its products that
are deemed necessary and useful, without
forewarning.
This household appliance is compliant with
the provisions of the European Community
Directives
• Low voltage Directive 2014/35/EU
• Electromagnetic compatibility Directive
2014/30/EU
• Regulation (EC) n. 1935/2004
• EU Regulation -66/2014
ATTENTION
do not remove the plate applied on the
internal face. It is visible when the oven
door is opened and states the product
identication data.
ATTENTION
This appliance must be earthed in
compliance with the local standards in force.
Failure to comply with that written can
compromise the safety of the appliance.
Faults caused by installation or improper use
are not covered by warranty..
Before installation and use of this appliance this
instruction manual must be read thoroughly for
correct installation, maintenance and use of the
same. Keep it carefully for future consultation.
This appliance has been designed for domestic
use only for cooking and heating foodstuffs.
All other use is considered hazardous. The
manufacturer is not liable for any damage caused
by improper use of the appliance.
In the event of malfunctioning, disconnect the
appliance from the mains electricity and contact
the After-sales assistance.
Never attempt to repair the appliance yourself.
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
5
Warnings regarding correct use of the
oven
• Do not lift or pull the oven with your hands.
• The appliance can also be installed and run
in ventilated rooms according to the local
regulations in force.
• Use of the appliance is only intended for
adults. Ensure it remains out of reach of
children.
• The appliance may not be used by children
under 8 years of age or by persons with
reduced physical, sensory or mental
capabilities, or without the experience or
knowledge required unless this is performed
under direct supervision or after they have
been given instructions concerning the safe
use of the appliance.
• Children must not play with the appliance.
• Cleaning and maintenance must not be
performed by children without adequate
supervision.
• The accessible parts become very hot during
operation and due to inertia when off. Do not
touch it.
• To insert or extract containers, always use
suitable protective gloves.
• Do not place inammable material inside
the oven. If forgotten, it could catch re after
switch-on.
• Do not sit on or place weight on the open door
and do not hang weights on the handle as to
do so could damage the product.
• Make sure the ventilation slots are not
obstructed.
• During use, do not touch the heating
elements.
• Do not touch the appliance with wet or damp
hands and feet.
• Do not pull the cable, grip the plug to remove
it from the socket.
• Before maintenance or cleaning, switch the
oven off and, if just used, wait for it to cool.
6
• To prevent any electric shocks, the appliance
must be off before the bulb is replaced.
• Do not clean the appliance using steam
cleaners.
• Abrasive materials or metal scrapers must
not be used to clean the oven door, as they
can damage the surfaces. Do not use acid
products (lime-scale products) because they
can damage the enamelled parts.
• If the power supply cable is damaged, it must
be replaced by the manufacture, by its after-
sales assistance service or by qualied staff.
• Pay attention not to trap power supply cables
from other household appliances in the door
when closing.
ATTENTION
NEVER PLACE SHEETS OF ALUMINIUM,
TRAYS OR OTHER CONTAINERS ON THE
WALLS OR BOTTOM OF THE OVEN. THE
MANUFACTURER IS NOT LIABLE FOR ANY
DAMAGE CAUSED BY IMPROPER USE OF THE
APPLIANCE
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
7
DESCRIPTION OF THE PRODUCT
Control panel
Fan-cover panel
Total extraction guides (where envisioned)
Support grids
Sauce collection tray
Grill cooking resistance
8
CONTROL PANEL
Thermostat
Programs selector
Timer CM/PSC
Clock/BT6 programmer
Power LED
Operating LED
Clock/OKD touch control programmer
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
9
Clock/Athena programmer
Clock/OR-PE analogue programmer
Clock/OR-PE electronic programmer
10
USER GUIDE FOR OVEN
Commissioning
Disconnect the appliance from the mains
electricity and remove the accessories from the
appliance. Clean them thoroughly with warm
water and detergent and put them back in the
initial position. Before using it for the rst time,
allow it to run on empty and at maximum for
about 2 hours while ventilating the room well.
The combustion fumes of the production residues
will be evacuated. Ventilate the environment well
during heating.
Power indicator LED
When on, it indicates that the oven is live and on.
Oven operating LED
The LED on indicates the heating phase; the LED
odd indicates that the temperature set has been
reached.
Flashing indicates that the temperature is
maintained constant on the value set.
Oven temperature thermostat
Turning the relative knob clockwise, it controls the
temperature inside the oven at the desired value
between 50° and 270°C
Programs switch or selector
The switch activates the type of functioning
desired for cooking.
(varies according to models)
Mechanical timer CM
The timer allows an acoustic signal after a pre-
established time, independently from cooking.
ente dalla cottura.
PSC mechanical cooking end programmer
Allows programming interruption of cooking for a
certain amount of time (maximum 2 hours).
Programmed functioning:turn the knob clockwise
and select the desired cooking time. When time
is up, the oven will automatically turn off and an
acoustic signal will mark the end of cooking.
Manual functioning: to use the oven in a traditional
manner without any programming, turn the knob
anti-clockwise to the symbol .
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
11
Analogue cooking end programming clock
Allows a cooking end to be programmed
(maximum 3 hours) in the same mode as the PSC
by turning the small knob
always clockwise.
Adjusting the time: pull the knob lightly and turn it
clockwise until the clock is set at the current time.
Manual operation: Turn the knob clockwise until
the hand reaches the manual symbol.
ATTENTION
The oven cannot work if the programmer is
at O
ELECTRONIC R PROGRAMMER INSTRUCTIONS
(MODELS FI-64/74 MTR-WTR)
This timer displays the time and operation of
the oven.
By operating on the push knob it is possible: to
adjust the time, program the start and end time
of cooking, set the alarm.
Adjusting the time
To adjust the time, briey press the knob 4 times
until the “CLOCK” icon ashes.
Therefore, increase or decrease the time in
steps of 1 minute, turn the knob clockwise or
anti-clockwise and the minutes hand moves by 1
minute clockwise or anti-clockwise.
After 10 seconds from the last adjustment, the
electronic timer automatically exits the time
adjustment mode.
Manual cooking
At rest, the timer allows manual cooking by
operating on the oven master switch (outside the
device).
After having supplied the mains power supply to
the timer, wait approx. 2 seconds before the relay
is energised.
12
Programming the cooking start and
end time
Programming the cooking start time: press the
knob once briey until the “START TIME” icon
ashes. Turn the knob clockwise until the desired
cooking start time is displayed.
The “START TIME” icon continues to ash for 10
seconds from the last rotation. If the knob is not
turned or pressed within this time, the hands go
back to displaying the time and the program is
annulled. If the knob is pressed, the Cooking Start
time is memorised (“START TIME” icon on with
xed light), as long as at least 1 minute of delay
has been set and you pass to setting the Cooking
End time (the“END TIME” icon goes from off to
ashing). Cooking will start when “Cooking Start
Time Set = Current Time”.
Programming the cooking end time allows
immediate start-up and to end cooking in
an automatic manner on the basis of the
programmed time.
Programming the cooking end time: press the
knob twice briey until the ““END TIME”TIME”
icon ashes.
To increase or decrease the cooking time, turn
the knob clockwise or anti-clockwise and the
minutes hand moves by 1 minute clockwise or
anti-clockwise.
Flashing of the “END TIME” icon continues for
10 seconds from the last rotation. The program
can be conrmed by pressing the knob as long
as at least 2 minutes of cooking have been
programmed.
On conrming the program, cooking is started
and the acoustic alarm is automatically activated.
Cooking will end when “Cooking
End Time Set = Current Time”.
To display the program set, press and release
the knob briey and, at the same time, the clock
hands and icons display the program set. At the
end of cooking, the “END TIME” icon ashes and
the alarm emits acoustic signals.
To annul the program before the end, press the
knob for 3 seconds; the program will be annulled
and the timer goes back to manual cooking mode.
Minute minder programming
Programming the Minute Minder allows an
alarm at the end of a programmed time without
activating cooking. To program an “alarm” without
starting cooking, press the knob briey 3 times
until the “ALARM” icon ashes. Turn the knob and
the setting of the Minute Minder is identical to
that of the Cooking End time.
The Minute Minder can only be used when there
is no program in progress.
Signalling and blackout
The timer signals every power cut by the ashing
“CLOCK” symbol. In this case, press the knob
briey to disable the signal.
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
13
ELECTRONIC PROGRAMMER B (MODELS FI-64/74 MTB-WTB)
Clock
Timer
Oven on
Cooking time
Cooking end time
Decrease num.
Increase num.
A
Automatic
Man
Manual
Safety lock
This programmer functions with touch system,
operate on the commands by exerting slight
pressure in the area indicated by the symbols.
Activation and adjustment of the time
Once the current is connected, the ashing
symbol and 12:00 appear on the display; the
h:min symbol appears.
By touching one of the three symbols SEL
all signals stop ashing. Time adjustment is now
possible. By maintaining pressure constant, the
increase is continuous. After a few seconds the
time is xed.
Selecting/annulling programs
The programs are selected by pressing the SEL
symbol and scrolling the menu The Man symbol
indicates that the oven is in manual mode.
The symbol
indicates that the oven is not
performing a program. To annul a program, take
the values set to 0:00.
Manual operation
The programmer must be activated, the Man
symbol illuminated and operation performed on
the knobs. The TIMER function can be used in all
cases.
Semi-automatic operation (cooking
duration programming)
Operate on the SEL symbol until the appearance
of the ashing
, numbers 0:00 and h:m
symbol, set cooking duration by operating on the
symbols. The remains xed and the
symbol, the actual time and the Auto symbol
appear. Turn the knob to the values desired. An
acoustic signal indicates the end of cooking, the
Man symbol starts to ash and the oven turns off.
To stop the acoustic signal, operate on any of the
symbols. Press SEL again to exit programming.
Semi-automatic operation (cooking
end programming)
Touch the SEL symbol until . appears. By
14
operating on the set the desired cooking
end time.
After a few seconds, the
symbol switches off,
the clock time re-appears and the Auto and
symbols switch on. Now turn the two knobs to the
desired temperature and cooking time.
When the set time is reached, the acoustic
signal indicates the end of cooking, the Man
symbol starts to ash and the oven turns off. To
stop the acoustic signal, operate on any of the
symbols. Press SEL again to exit programming.
Programming can be annulled by taking the
cooking time to 0:00.
Automatic operation (deferred
cooking start setting)
Operate on the SEL symbol until the appearance
of ashing set the desired cooking time (using
). Still using SEL go to the ashing symbol
and set the desired cooking end time.
After a few seconds, the symbol switches off
the clock time re-appears and the Auto symbol
switches on. Turn the knobs onto the desired
functions and temperatures. The oven remains
off and will turn on automatically according to
what you set.
When the set time is reached, the acoustic signal
indicates the end of cooking, the Man symbol
starts to ash and the oven turns off. Turn the
knobs to the off position. To stop the acoustic
signal, touch any of the symbols. Press SEL
again to exit programming. Programming can be
annulled by taking the cooking time to 0:00.
Timer function
Operate on the SEL symbol until the ashing
symbol, the numbers 0:00 and the min:sec
symbols appear. By touching the symbols, the
desired time is set. The programmer will start the
countdown. On reaching the time set, the acoustic
signal is triggered. Touch any symbol indifferently
to stop the acoustic signal. To annul this function,
take the timer to 0:00. This function can be used
for manual cooking.
Acoustic signal
To stop the acoustic signal, touch one of the
three boxed symbols
SEL . It is possible to
adjust the volume of the signal to three levels, as
follows. Operate on the SEL symbol until the letter
L appears, followed by the level currently set (from
L1 to L3). Touch the symbols to set the
desired level
Child safety or accidental contacts
It is a function that can block access to the
functionality of the electronic programmer keys
both when the oven is running and when the oven
is off.
When, by operating for approx. 5 seconds on
the symbol this function activates, (the
symbol lights up), this prevents children or other
persons from pressing the programmer keys
and modifying the previous program or from
starting the oven that is off. Operate in the same
way to deactivate it. In manual position (Man),
lactivation of the lock does not allow use of the
oven. Consequently, with the timer function, the
lock cannot be activated.
NOTE: the lock must be deactivated for access
to a set program.
This remains active even after a power
cut, which switches the programmer off.
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
15
Touch control O instructions (model FI-64/74 MTLO)
On/Off
Cooking starts
Programs stop
Temperature adjustment
Increase numerations
Decrease numerations
Core probe
Scroll down
Scroll up
Fast heating
Times adjustment
Light On/Off
Safety lock
This programmer functions with touch system,
operate on the commands by exerting slight
pressure in the area indicated by the symbols.
Oven switch-on/off
To switch the oven on or off, lightly press and hold
on the symbol for approx. one second. .
The actual time will appear on the display. This
can be performed independently from whether
the child safety function is activated or not .
Time adjustment
At the time of the rst connection of the current,
the ashing numbers 0:00 appear on the display.
The oven cannot be used without having adjusted
the time. To adjust the time, operate on the
and symbols. The time is xed after approx. 7
seconds when there is no intervention.
In the event of a temporary power cut, the data
memorised remain set for approx. 45 seconds. To
modify the time set, press the and symbols
simultaneously until the numbers start to ash. If
the time is to be read in 12 hour am/pm mode,
press
and simultaneously for 5 seconds..
Selecting programs
By pressing the symbols the oven functions
menu can be scrolled.
The current function will ash for a few seconds
and the set temperature assigned to the function
will appear (some functions do not envision
adjustment of the temperatures). The symbol
16
and the ashing PAUSE wording indicate that the
oven is ready to start in the mode selected, but
cooking has not yet begun.
Modication of the temperature
assigned to the function
To modify the temperatures dened for each
function, just touch the symbol and operate
on and adjusting the temperature. After
a few seconds, the new value is xed and stops
ashing. Press to resume cooking. To go back
to the pre-set temperature, operate in the same
way.
To change the temperature set by the
manufacturer denitively, press on the symbol
until a warning beep is heard (approx. 5 seconds)
and the temperature numbers stop ashing.
Manual operation
Once the function has been selected, by operating
on
, icooking starts with the temperature set
indicated on the display. The PAUSE symbol
disappears and the timer starts, which indicates
the time passed from the start of cooking. This
will continue until interrupted manually or the
maximum limit pre-set has been reached. The
maximum cooking time limit that can be reached
varies according to the temperature set at the
following values:
For temperatures: from 50 – 120 °C max time
10h; from 121 – 200 °C max time 6h; from 201
– 250 °C max time 3h.
In semi-automatic and automatic cooking,
the same is interrupted automatically as per
previously set parameters.
Pause, modify or cooking end
functions
By pressing on during cooking, this is
interrupted and the PAUSE symbol ashes. By
touching again, all indications on the display
disappear. The display will indicate any residual
temperature.
By pressing the rst time, the last setting
interrupted appears and pressing it again,
cooking is resumed.
To modify the parameters (functions,
temperatures, etc.), follow the previous indications
by pressing at the end on
to conrm.
Semi-automatic operation (cooking
duration time programming)
This function allows the desired cooking end time
to be set, with immediate start-up of the same
by setting the desired cooking duration time. In
this case, the food probe cannot be used (where
envisioned).
To activate semi-automatic cooking, select
the desired oven function from the menu and
adjust the cooking temperature, if necessary.
By touching the symbol 0:00 of the timer will
start to ash. Adjust the desired cooking duration
time (the AUTO symbol appears) and press on
, cooking starts immediately and the time it will
end appears on the display.
An acoustic signal will inform of end of cooking,
press on to interrupt the signal. To interrupt
cooking, press on PAUSE, will appear. Press a
second time on to annul the program.
Semi-automatic operation (cooking end
programming)
In this case, it is possible to set the desired
cooking end time with immediate start-up,
without indicating the duration. In for the previous
function, the food probe cannot be used (where
envisioned).
To activate cooking end, select the desired
oven function from the menu and adjust the
cooking temperature, if necessary, as previously
described. Press the , symbol twice; the
cooking end time appears, which corresponds to
the time of day.
Operate on and to program the desired
cooking end time. Press on , the PAUSE symbol
stops ashing and the oven starts cooking.
To interrupt cooking, press on , PAUSE, will
appear. Press a second time on to annul the
program.
EN
BUILT-IN ELECTRIC OVENS
INSTALLATION, USE AND MAINTENANCE INSTRUCTIONS
17
Automatic operation (with deferred
cooking start setting)
This function allows cooking duration to be
programmed, also setting the start time. Also in
this case, it is not possible to use the food probe
(where envisioned).
To activate automatic cooking, select the desired
oven function from the menu and adjust the
cooking temperature. By touching the symbol
0:00 of the timer will start to ash. Adjust the
desired cooking duration time (the AUTO symbol
will appear). Press on the , symbol, the ashing
cooking end time envisioned by the duration
time entered appears. Operate on and
to set the desired cooking end time. Press to
activate programming. The function, temperature
and cooking end time symbols appear on the
display. A ashing arrow near to the temperature
will indicate that cooking has started.
An acoustic signal will inform of end of cooking,
press on to interrupt the signal. To interrupt
cooking, press on , PAUSE, will appear. Press a
second time on to annul the program.
Timer function
With this function it is possible to activate a timer
that will signal when the time set has expired.
Press lightly several times on the , symbol until
the ashing symbol appears along with 0:00
on the timer.
Adjust the desired minutes by operating on
and . When the time set has passed, an
acoustic signal, which will last for approx. 7
minutes, will inform you that the time has expired.
To stop the acoustic symbol, operate on or .
Alarm clock function
Premere leggermente più volte sul simbolo
no a che non appare lampeggiante il simbolo
assieme all’orario del giorno. A questo punto con
e regolate l’ora del giorno in cui desiderate
essere avvisati dalla sveglia. Trascorso il tempo
impostato un segnale acustico che durerà
per circa 7 minuti vi avviserà che il tempo è
scaduto. Per fermare il segnale acustico agire
indifferentemente su o .
Core probe function (in models set-up)
The Core Probe is a sensor that can be connected
inside the oven and inserted inside the dish to be
cooked. The use of this probe allows automatic
interruption of cooking when the inside of the
food reaches the desired temperature.
To activate it, select the desired function and, if
necessary, modify the temperature that appears
by default (see the “Modifying the temperature
assigned to the function” paragraph).
Press the key. The pre-set value of the
programmed temperature for the probe appears
ashing in the two numbers on the right of the
timer (with this function, the timer display is used
to show the core probe temperatures). The word
AUTO. also appears. Set the temperature desired
for the inside of the food from the values between
20/99°C by operating on the or .
Press the GO, key PAUSE switches off and cooking
starts. The current temperature is visible on the
numbers on the left while the temperature that
you have set is visible on the right-hand numbers
of the timer display.
Fast heating function (for some
functions only)
This function allows faster oven pre-heating.
After having selected the desired cooking
function, press the button. The elements most
suitable for quickly reaching the set temperature
are activated and the symbol can be seen on
the display, which will disappear as soon as the
temperature is reached. The program will also
emit a warning sign. At this point, the system will
state the previously set functions as active.
Fast heating cannot be activated with the
GRILL function, when the difference between
temperature set and that to be reached is lower
than 50°C and when the temperature to reach is
lower than 100°C.
18
Temperatures display
The 5 bars near to the temperature set indicator
show the temperature level reached. The arrow
facing upwards and ashing signals that the oven
is heating up. After cooking has been interrupted,
while the temperature inside the oven is above
60 °C, a ashing downward arrow and hot will
appear on the display and will remain until the
temperature drops below 60 °C.
Acoustic signal: the acoustic signal continues
to ring at the end of a program for approx. 7
minutes. To stop it, press or indifferently.
It is possible to adjust the volume of the signal
to three levels: in the STOP position, operate on
the symbol, pressing it for approx. 5 seconds
until the tone level currently set appears. Operate
on the symbol again to set the desired level.
Command tones
It is possible to modify the type of sound emitted
when operating on the commands.
In the STOP, position, slightly press the symbol
for approx. 5 seconds. Operate on the symbol
again to select “bt” (beep tone), “c” (click tone) or
“nt” (no tone)
Energy saving
To limit the waste of electricity, the PS (Power
Save) function can be used. This function switches
the oven off completely if, in absence of cooking
functions activated, there is no intervention with
any command. Press and hold the symbol for
approx. 5 seconds PS on will appear. The function
is now active and the oven will automatically turn
off after approximately 1 minute. Operate on the
symbol to switch it back on..
Child safety
This function allows access to the functionality
of the electronic programmer keys to be blocked,
both when the oven is running and when the oven
is off.
By operating on the symbol for 2 seconds,
this function is activated. This prevents children
or other persons from pressing the programmer
keys involuntarily. Thus modifying the previous
program or from starting the oven that is off.
Every programmer signal that intervenes while
the oven is on, when the safety lock is activated,
can be eliminated by pressing any of the boxed
keys. The safety lock will remain active
.
NOTE: The lock must be deactivated for access
to a set program.
Error signals
When situations occur that prevent normal
operation of the oven, the device informs this with
a series of signals, such as:
Err1: communication error – Err2: PT1000
(probe) open circuit – Err3: PT1000 (probe)
closed circuit – Err4: temperature too high on the
display – Err5: temperature too high on the power
board – Err6: fault in the display – Err7: fault in
the power board – Err8: no heating is detected.
For the Err4 and Err5 errors, switch the oven
off and allow it to cool for a few hours and then
try to use it again. If the error persists, call the
technical after-sales assistance. If any of the
other errors are present, the authorised after-
sales assistance must be informed.
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
Страница загружается...
/