Sony DSC-W310 Silver, Cyber-shot DSC-W310 Pink, DSC-W310 Black Руководство пользователя

  • Привет! Я прочитал инструкцию по эксплуатации для цифрового фотоаппарата Sony DSC-W310. В ней описаны основные функции, такие как съемка фотографий и видео, настройка параметров и использование различных режимов. Задавайте свои вопросы — я с удовольствием вам помогу!
  • Как зарядить батарею?
    Какие карты памяти поддерживаются?
    Как установить дату и время?
    Где хранятся фотографии, если нет карты памяти?
GB
RU
UA
© 2010 Sony Corporation
4-169-317-41(1)
DSC-W310
GB Digital Still Camera/Instruction Manual
RU Цифровой фотоаппарат/Инструкция по эксплуатации
UA Цифровий фотоапарат/Посібник з експлуатації
GB
2
Owner’s Record
The model and serial numbers are located on the bottom. Record the serial number in the
space provided below. Refer to these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DSC-W310
Serial No. ______________________________
To reduce fire or shock hazard, do not expose the unit to rain or
moisture.
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the
proper configuration for the power outlet.
[ Battery pack
If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical
burns. Observe the following cautions.
Do not disassemble.
Do not crush and do not expose the battery pack to any shock or force such as
hammering, dropping or stepping on it.
Do not short circuit and do not allow metal objects to come into contact with the battery
terminals.
Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a
car parked in the sun.
English
WARNING
CAUTION
GB
3
GB
Do not incinerate or dispose of in fire.
Do not handle damaged or leaking lithium ion batteries.
Be sure to charge the battery pack using a genuine Sony battery charger or a device that
can charge the battery pack.
Keep the battery pack out of the reach of small children.
Keep the battery pack dry.
Replace only with the same or equivalent type recommended by Sony.
Dispose of used battery packs promptly as described in the instructions.
[ Battery charger
Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC
power source (mains) as long as it is connected to the wall outlet (wall socket). If some
trouble occurs while using the battery charger, immediately shut off the power by
disconnecting the plug from the wall outlet (wall socket).
[ RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used
rechargeable batteries to the collection and recycling location nearest
you.
For more information regarding recycling of rechargeable batteries,
call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.
[ Battery pack
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
UL is an internationally recognized safety organization.
The UL Mark on the product means it has been UL Listed.
If you have any questions about this product, you may call:
Sony Customer Information Center
1-800-222-SONY (7669)
The number below is for the FCC related matters only.
For Customers in the U.S.A. and Canada
For Customers in the U.S.A.
GB
4
[ Regulatory Information
[ CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual
could void your authority to operate this equipment.
[ Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
[ Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or
guarantee matters please refer to the addresses given in separate service or guarantee
documents.
Declaration of Conformity
Trade Name: SONY
Model No.: DSC-W310
Responsible Party: Sony Electronics Inc.
Address:16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
For Customers in Europe
GB
5
GB
This product has been tested and found compliant with the limits set out in the EMC
Directive for using connection cables shorter than 3 meters (9.8 feet).
[ Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound
of this unit.
[ Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail),
restart the application or disconnect and connect the communication cable (USB, etc.)
again.
[ Disposal of Old Electrical & Electronic Equipment (Applicable in
the European Union and other European countries with separate
collection systems)
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product,
please contact your local Civic Office, your household waste disposal service or the shop
where you purchased the product.
[ Disposal of waste batteries (applicable in the European Union
and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery
provided with this product shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a
chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are
added if the battery contains more than 0.0005% mercury or 0.004% lead.
By ensuring these batteries are disposed of correctly, you will help prevent
potentially negative consequences for the environment and human health which could
otherwise be caused by inappropriate waste handling of the battery. The recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a
permanent connection with an incorporated battery, this battery should be replaced by
qualified service staff only. To ensure that the battery will be treated properly, hand over
the product at end-of-life to the applicable collection point for the recycling of electrical
and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the
product safely.
Hand the battery over to the applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or battery, please contact
your local Civic Office, your household waste disposal service or the shop where you
purchased the product.
GB
6
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the
supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or
mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never use the plug without the fuse cover. If you
should lose the fuse cover, please contact your nearest Sony service station.
Notice for customers in the United Kingdom
GB
7
GB
Table of contents
Getting started
Refer to “Cyber-shot Handbook” (PDF) on supplied
CD-ROM.....................................................................................8
Checking the accessories supplied...........................................8
Notes on using the camera ........................................................8
Identifying parts .......................................................................11
Charging the battery pack ....................................................... 12
Inserting the battery pack/a memory card (sold
separately) ............................................................................... 14
Setting the clock ......................................................................17
Shooting/viewing images
Shooting still images ................................................................18
Shooting movies.......................................................................19
Viewing images ........................................................................20
“Cyber-shot Handbook” (PDF)
Learning more about the camera (“Cyber-shot
Handbook”)..............................................................................21
Others
List of icons displayed on the screen ......................................22
Number of still images and recordable time of movies ...........24
Precautions ..............................................................................25
Specifications...........................................................................27
GB
8
Checking the accessories supplied
Battery charger BC-CSN/BC-CSNB (1)
Power cord (mains lead) (not supplied in the USA and Canada) (1)
Rechargeable battery pack NP-BN1 (1)
Dedicated USB cable (1) (Sony Corporation 1-837-597-)
Dedicated A/V cable (1) (Sony Corporation 1-837-778-)
Wrist strap (1)
•CD-ROM (1)
Cyber-shot application software
“Cyber-shot Handbook”
Instruction Manual (this manual) (1)
Notes on using the camera
Changing the language setting
The screen language can be changed if necessary.
To change the language setting, press the MENU button, then select
(Settings) t (Main Settings) t [Language Setting].
Internal memory and memory card back up
Do not turn off the camera, remove the battery pack, or remove the memory
card while the access lamp is lit. Otherwise, the internal memory data or the
memory card may be damaged. Be sure to make a backup copy to protect your
data.
Refer to “Cyber-shot Handbook” (PDF)
on supplied CD-ROM
For details on advanced operations, please read “Cyber-
shot Handbook” (PDF) on the CD-ROM (supplied) using a
computer.
Refer to “Cyber-shot Handbook” for in-depth instructions
on shooting or viewing images and connecting the camera
to your computer, printer or TV (page 21).
GB
9
GB
Notes on recording/playback
To ensure stable operations of the memory card, we recommend that you use
this camera to format any memory card being used with this camera for the
first time. Note that formatting will erase all data recorded on the memory
card. This data cannot be restored. Be sure to back-up any important data to a
PC or other storage location.
Before you start recording, make a trial recording to make sure that the
camera is working correctly.
The camera is neither dust-proof, nor splash-proof, nor water-proof. Read
“Precautions” (page 25) before operating the camera.
Avoid exposing the camera to water. If water enters inside the camera, a
malfunction may occur. In some cases, the camera cannot be repaired.
Do not aim the camera at the sun or other bright light. It may cause the
malfunction of the camera.
Do not use the camera near a location that generates strong radio waves or
emits radiation. Otherwise, the camera may not properly record or play back
images.
Using the camera in sandy or dusty locations may cause malfunctions.
If moisture condensation occurs, remove it before using the camera.
Do not shake or strike the camera. It may cause a malfunction and you may
not be able to record images. Furthermore, the recording media may become
unusable or image data may be damaged.
Clean the flash surface before use. The heat of flash emission may cause dirt
on the flash surface to become discolored or to stick to the flash surface,
resulting in insufficient light emission.
Notes on the LCD screen and lens
The LCD screen is manufactured using extremely high-precision technology
so over 99.99% of the pixels are operational for effective use. However,
some tiny black and/or bright dots (white, red, blue or green) may appear on
the LCD screen. These dots are a normal result of the manufacturing process,
and do not affect the recording.
When the battery level becomes low, the lens might stop moving. Insert a
charged battery pack and turn on the camera again.
On camera’s temperature
Your camera and battery may get warm due to continuous use, but it is not a
malfunction.
On the overheat protection
Depending on the camera and battery temperature, the power may turn off
automatically to protect the camera. A message will be displayed on the LCD
screen before the power turns off.
GB
10
On image data compatibility
The camera conforms with DCF (Design rule for Camera File system)
universal standard established by JEITA (Japan Electronics and Information
Technology Industries Association).
Sony does not guarantee that the camera will play back images recorded or
edited with other equipment, or that other equipment will play back images
recorded with the camera.
Warning on copyright
Television programs, films, videotapes, and other materials may be
copyrighted. Unauthorized recording of such materials may be contrary to the
provisions of the copyright laws.
No compensation for damaged content or recording failure
Sony cannot compensate for failure to record or loss or damage of recorded
content due to a malfunction of the camera or recording media, etc.
GB
11
GB
Identifying parts
A ON/OFF (Power) button
B Shutter button
C Flash
D Microphone
E ON/OFF (Power) lamp
F Self-timer lamp/Smile Shutter
lamp
G Speaker
H Lens
I LCD screen
J (Playback) button
K For shooting: W/T (zoom)
button
For viewing: (Playback
zoom) button/ (Index) button
L (USB)/A/V OUT jack
M Terminal cover
N Hook for wrist strap
O Mode switch
P (Delete) button
Q MENU button
R Control button
MENU on: v/V/b/B/z
MENU off: DISP/ / /
S Tripod receptacle
Use a tripod with a screw less than
5.5 mm (7/32 inches) long.
Otherwise, you cannot firmly
secure the camera, and damage to
the camera may occur.
T Battery/Memory card cover
U Battery insertion slot
V Access lamp
W Memory card slot
X Battery eject lever
Bottom
GB
12
Charging the battery pack
1
Insert the battery pack into
the battery charger.
You can charge the battery even when
it is partially charged.
2
Connect the
battery charger to
the wall outlet (wall
socket).
If you continue charging
the battery pack for about
one more hour after the
CHARGE lamp turns off,
the charge will last slightly
longer (full charge).
CHARGE lamp
Lit: Charging
Off: Charging finished
(normal charge)
3
When charging is finished, disconnect the battery
charger.
Battery
pack
CHARGE lamp
Plug
Power cord
(Mains lead)
For customers in countries/regions
other than the USA and Canada
For customers in the USA and Canada
CHARGE lamp
GB
13
GB
x
Charging time
The table above shows the time required to charge a fully depleted battery pack at
a temperature of 25°C (77°F). Charging may take longer depending on conditions
of use and circumstances.
Connect the battery charger to the nearest wall outlet (wall socket).
When charging is finished, disconnect the power cord (mains lead) from the wall
outlet (wall socket), and remove the battery pack from the battery charger.
Be sure to use the battery pack or the battery charger of the genuine Sony brand.
x
Battery life and number of images you can record/
view
The number of still images that can be recorded is based on the CIPA standard,
and is for shooting under the following conditions.
(CIPA: Camera & Imaging Products Association)
[SteadyShot] is set to [Off].
DISP (Screen Display Settings) is set to [Normal].
Shooting once every 30 seconds.
The zoom is switched alternately between the W and T ends.
The flash strobes once every two times.
The power turns on and off once every ten times.
A fully charged battery pack (supplied) is used at an ambient temperature of
25°C (77°F).
Using Sony “Memory Stick PRO Duo” media (sold separately).
Full charge time Normal charge time
Approx. 245 min. Approx. 185 min.
Notes
Battery life (min.) No. of Images
Recording Approx. 110 Approx. 220
Viewing Approx. 220 Approx. 4400
Note
zUsing the camera abroad
You can use the camera and the battery charger (supplied) in any country or
region where the power supply is within 100 V to 240 V AC, 50/60 Hz.
Do not use an electronic transformer (travel converter). This may cause a
malfunction.
GB
14
Inserting the battery pack/a memory card
(sold separately)
1
Open the cover.
2
Insert a memory card (sold
separately).
With the notched corner down as
illustrated, insert the memory card
until it clicks into place.
3
Insert the battery pack.
Align the battery pack with the
guide arrow inside the battery
insertion slot. Then, insert the
battery pack until the battery eject
lever locks into place.
Note the notched corner
facing the correct direction
Battery eject lever
GB
15
GB
x
Memory card that you can use
The following memory cards are compatible with this camera: “Memory Stick
PRO Duo” media, “Memory Stick PRO-HG Duo” media, “Memory Stick
Duo” media, SD memory card and SDHC memory card. MultiMediaCard
cannot be used.
In this manual, the term “Memory Stick Duo” media is used to refer to
“Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media and
“Memory Stick Duo” media.
When recording movies, it is recommended that you use the following
memory cards:
(“Memory Stick PRO Duo” media)
(“Memory Stick PRO-HG Duo” media)
SD memory card or SDHC memory card (Class 2 or faster)
For details on the number of images/time that can be recorded, see page 24.
x
To remove the memory card
Never remove the memory card/battery pack when the access lamp is lit. This may
cause damage to data in the memory card/internal memory.
4
Close the cover.
Closing the cover with the battery
inserted incorrectly may damage the
camera.
Make sure that the access lamp is not lit,
then push the memory card in once.
Note
Access lamp
GB
16
x
When there is no memory card inserted
Images are stored in the camera’s internal memory (approximately 6 MB).
To copy images from the internal memory to a memory card, insert a memory
card in the camera, then select MENU t (Settings) t (Memory
Card Tool) t [Copy].
x
To remove the battery pack
x
Checking the remaining battery time
A remaining-charge indicator appears on the LCD screen.
It takes about one minute until the correct remaining-charge indicator appears.
The remaining-charge indicator may not be correct under certain circumstances.
When [Power Save] is set to [Standard] or [Stamina], if you do not operate the
camera for a certain period of time while the power is on, the LCD screen becomes
dark, then the camera turns off automatically (Auto power-off function).
To keep clean battery pack terminal and prevent short-circuiting, place the battery
pack in a plastic bag, etc. when carrying and storing to isolate it from other metal
objects, etc.
Slide the battery eject lever. Be sure not
to drop the battery pack.
Notes
Battery eject lever
High Low
GB
17
GB
Setting the clock
x
Setting the date and time again
Press the MENU button, then select (Settings) t (Clock Settings).
1
Press the ON/OFF (Power)
button.
The camera is turned on.
It may take time for the power to
turn on and allow operation.
2
Select a setting item with
v/V on the control button,
then press z.
Date & Time Format: Selects the
date and time display format.
Date & Time: Sets the date and time.
3
Set the numeric value with v/V/b/B, then press z.
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
4
Select [OK], then press z.
ON/OFF (Power) button
Control
button
GB
18
Shooting still images
1
Set the mode switch to
(Still Image), then
press ON/OFF (Power)
button.
2
Hold the camera steady as
illustrated.
Press the T button to zoom in, W button to
zoom out.
3
Press the shutter
button halfway down
to focus.
When the image is in focus, a
beep sounds and the z
indicator lights.
4
Press the shutter button
fully down.
Mode switch
ON/OFF (Power) button
Shutter
button
AE/AF
lock
GB
19
GB
Shooting movies
1
Set the mode switch to
(Movie), then press
ON/OFF (Power) button.
2
Press the shutter button
fully down to start
recording.
3
Press the shutter button fully down again to stop
recording.
Mode switch
ON/OFF (Power) button
GB
20
Viewing images
x
Returning to shooting images
Press the shutter button halfway down.
x
Turning off the camera
Press ON/OFF (Power) button.
1
Press the (Playback)
button.
The last image shot is displayed.
x
Selecting next/previous
image
Select an image with B (next)/b
(previous) on the control button.
Press z in the center of the control
button to view movies.
x
Deleting an image
1 Press (Delete) button.
2 Select [This Image] with v on the
control button, then press z.
(Playback) button
(Delete)
button
Control button
/