Zanussi FCS825C Руководство пользователя

Бренд: Zanussi

Модель: FCS825C

Категория: Стиральные машины

Тип: Руководство пользователя

User manual 2

Инструкция по

эксплуатации

Washing Machine

Стиральная машина

FCS 825 C

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2

Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3

Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5

Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7

Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9

Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12

What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13

Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16

Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17

Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20

Subject to change without notice

Safety information

Important! Read carefully & keep for future reference.

• The safety of Your appliance complies with the industry

standards and with legal requirements on the safety of

appliances. However, as manufacturers, we feel it is

our duty to provide the following safety notes.

• It is most important that this instruction book should

be retained with the appliance for future reference.

Should the appliance be sold or transferred to another

owner, or should you move house and leave the appli-

ance, always ensure that the book is supplied with the

appliance in order that the new owner can get to know

the functioning of the appliance and the relevant warn-

ings.

• You MUST read them carefully before installing or us-

ing the appliance.

• Before first starting up, check the appliance for any

damage incurred during transport. Never connect up a

damaged appliance . If parts are damaged, contact your

supplier.

• If the appliance is delivered in the winter months when

there are minus temperatures. Store it at room temper-

ature for 24 hours before using for the first time.

General safety

• It is dangerous to alter the specifications or attempt to

modify this product in any way.

• During high temperature wash programmes the door

glass may get hot. Do not touch it!

• Make sure that small pets and children do not climb

into the drum. To avoid this, please check into the

drum before using.

• Any objects such as coins, safety pins, nails, screws,

stones or any other hard, sharp material can cause ex-

tensive damage and must not be placed into the ma-

chine.

• Only use the advised quantities of fabric softener and

detergent. Damage to the fabric can ensue if you over-

fill. Refer to the manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces, washable belts

etc in a washing bag or pillow case as it is possible for

such items to slip down between the tub and the inner

drum.

• Do not use your washing machine to wash articles with

whalebones, material without hems or torn material.

• Always unplug the appliance and turn off the water

supply after use, cleaning and maintenance.

• Under no circumstances should you attempt to repair

the machine yourself. Repairs carried out by inexper-

ienced people may cause injury or serious malfunc-

tioning. Contact your local Service Centre. Always in-

sist on genuine spare parts.

Installation

• This appliance is heavy. Care should be taken when

moving it.

• When unpacking the appliance, check that it is not

damaged. If in doubt, do not use it and contact the

Service Centre.

• All packing and transit bolts must be removed before

use. Serious damage can occur to the product and to

property if this is not adhered to. See relevant section

in the user manual.

• After having installed the appliance, check that it is not

standing on the inlet and drain hose and the worktop is

not pressing the electrical supply cable against the

wall.

• If the machine is situated on a carpeted floor, please

adjust the feet in order to allow air to circulate freely

under the appliance.

• Always be sure, that there is no water leakage from ho-

ses and their connections after the installation.

• If the appliance is installed in a location subject to

frost, please read the “dangers of freezing” chapter.

• Any plumbing work required to install this appliance

should be carried out by a qualified plumber or compe-

tent person.

• Any electrical work required to install this appliance

should be carried out by a qualified electrician or com-

petent person.

Use

• This appliance is designed for domestic use. It must

not be used for purposes other than those for which it

was designed.

• Only wash fabrics which are designed to be machine

washed. Follow the instructions on each garment label.

• Do not overload the appliance. See the Washing Pro-

gramme Table.

• Before washing, ensure that all pockets are empty and

buttons and zips are fastened. Avoid washing frayed or

torn articles and treat stains such as paint, ink, rust,

and grass before washing. Underwired bras must NOT

be machine washed.

• Garments which have been in contact with volatile pe-

troleum products should not be machine washed. If

volatile cleaning fluids are used, care should be taken

to ensure that the fluid is removed from the garment

before placing in the machine.

• Never pull the power supply cable to remove the plug

from the socket; always take hold of the plug itself.

• Never use the appliance if the power supply cable, the

control panel, the working surface or the base are dam-

aged so that the inside of the washing machine is ac-

cessible.

Child safety

• This appliance is not intended for use by person (in-

cluding children) with reduced physical sensory or

mental capabilities or lack of experience and knowl-

edge unless they have been given supervision or in-

struction concerning use of the appliance by a person

responsible for their safety.

• Young children should be supervised to ensure that

they do not play with the appliance

• The packaging components (e.g. plastic film, polystyr-

ene) can be dangerous to children - danger of suffoca-

tion! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s

reach.

• Make sure that children or pets do not climb into the

drum.

Product description

Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and

detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so

saving energy.

Machine front

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Adjustable feet (front)

Machine rear

1 Transit locking devices

2 Drain hose

3 Electrical lead

4 Inlet hose

Detergent dispenser drawer

Compartment for powder or liquid detergent used for

main wash. If using liquid detergent pour it just before

starting the programme.

Compartment for liquid additives (fabric softener,

starch).

Any fabric softener or starching additives must be poured

into the compartment before starting the wash pro-

gramme.

Control panel

1 2 3 4 5 6 87 9

Henceforth, the programme selector dial, the spin selector dial, programme progress lights and different buttons

will be indicated in all the book with the relevant numbers given in this table.

1 Detergent drawer • Detergent drawer has 2 separate compartments for detergent and fabric

conditioner.

Prewash detergent is to be added straight into the drum.

2 Option button:

Quick

Daily

• By means of this button, you can select only one of the options.

• The relevant light will light up.

Economy button

• By means of this button, the machine performs an energy saving cycle.

• The relevant light will light up.

Prewash button

• By means of this button, the machine performs a prewash cycle before the

main wash phase.

• The relevant light will light up.

Easy iron button

• By means of this button, the laundry is gently washed and spun.

• The relevant light will light up.

Start/Pause button

• This button allows to start the selected programme; the corresponding in-

dicator light is lit.

• This button interrupts also a programme which is running, the corre-

sponding indicator light starts to flash.

7 Programme progress display • The different pilot lights illuminate depending on the running programme

phase.

8 Spin speed selector • The spin speed selector dial allows for changing the spin speed. Turn the

spin selector, if you want your laundry to be spun at a speed different from

the one proposed by the appliance or select «Rinse Hold» or "No spin"

option.

9 Programme selector dial and

ON/OFF switch

• The programme selector dial allows to select a programme and/or to reset,

cancel the programme, switch the machine on/off.

• Programme selector dial is divided into following sections: Cotton, Syn-

thetic, Delicate, Wool, Special programmes. It can be turned either clock-

wise or anticlockwise.

Table of Symbols

= Quick = Washing = No Spin

= Daily = Rinses = Drain

= Economy = Spin = Cold wash

=Prewash = Cycle End = Wool

= Easy iron = Door Locked = Hand wash

= Start/Pause = Rinse Hold = ON/OFF

Functions

Options (button

)

Quick

Short programme for lightly soiled white-/coloured and

synthetic laundry. The washing time will be reduced ap-

prox. 10 minutes. Max. recommended temperature 60°C.

Daily

Short programme for normally soiled cotton, synthetic or

delicate items. The washing time will be reduced accord-

ing to the type of fabric and the selected temperature.

This options can not be chosen together with the

programme 60E and neither with the wool, delicate

or hand wash programmes. The washing time will be re-

duced depending on the type of material and the selected

temperature. Recommended load for cotton is 2 kg.

Economy (button

)

Only for cottons and synthetic items lightly or normally

soiled at a temperature of 40 °C or higher. The washing

time will be prolonged and the washing temperature will

be reduced. You can use this option if you want to wash

normally soiled laundry and at the same time save energy.

Prewash (button

)

If the laundry is heavily soiled, you can choose a pro-

gramme with prewash. Before the main wash the machine

runs a prewash up to 30° C. The washing time will be

prolonged approx. 20 minutes. The prewash ends with a

short spin in the programmes for cotton and synthetic

laundry. In the programme for delicate laundry the water is

only drained. The prewash option is not available for the

wool programme.

Easy iron (button

)

Selecting this button, the laundry is gently washed and

spun to avoid any creasing. In this way ironing is easier.

Furthermore the machine will perform 6 rinses instead of

3 for cotton and 4 rinses instead of 3 for synthetic.

Rinse hold or No spin (

)

Rinse hold

By selecting this option the water of the last rinse is not

emptied out to prevent the fabrics from creasing. When

the programme has finished, the lights "End" and

"Locked" are lit to indicate that the water must be emptied

out (See: " At the end of the programme").

No spin

By selecting this option all the spinning phases are exclu-

ded. To be used for extremely delicate material. The ma-

chine will add some additional rinses to the cotton and

synthetic programmes.

Programme progress display (

)

(A)

(B)

(C)

(D)

(E)

The light A illuminates when the machine is performing

the washing phase.

The light B illuminates when the machine is rinsing.

The light C illuminates when the machine is spinning.

The light D illuminates at the end of the washing cycle.

The light E indicates if the door can be opened:

• The light is lit: the door cannot be opened.

• The light is out: the door can be opened.

• The light is flashing: the door can soon be opened.

Before first use

Warning!

Ensure that the electrical and water connections comply

with the installation instructions.

Important! Remove any material from the drum.

Important! We recommend you to run a wash programme

without any load, to clear any residues which may have

been left by the manufacturing process. Pour approx. 100

ml of detergent straight into the drum and run a cotton

cycle at 60°C. When the programme is finished the

machine will be ready to use.

Daily use

Load the laundry

Open the door by carefully pulling the door handle out-

wards. Place the laundry in the drum, one item at a

time, shaking them out as much as possible. Close the

door.

Measure out the detergent and the fabric softener

Pull out the dispenser

drawer until it stops.

Measure out the amount of

detergent required, pour it

into the larger compart-

ment on the left

If required, pour fabric

softener into the smaller

compartment marked

(the amount used must not

exceed the «MAX» mark

in the drawer). Close the

drawer gently.

Select the required programme by means of the

programme selector dial (9)

Turn the programme selector dial to the required pro-

gramme. The selector can be turned either clockwise or

anticlockwise.

The green light of button 6 starts to flash

On programme progress display the pilot lights corre-

sponding to all phases composing the selected pro-

gramme are lit.

On position

the programme is reset and the machine

is switched OFF.

At the end of the programme the selector dial must be

turned to position

to switch the machine off.

Important! If you turn the programme selector dial to

another programme when the machine is working, the

lights in the programme progress display will start to flash

to indicate a wrong selection. The machine will not

perform the new selected programme.

Select the spin speed, Rinse Hold or No spin option

(8)

Select the spin speed, Rinse Hold option or No Spin op-

tion by turning the spin speed selector.

For the maximum spin speed allowed by each pro-

gramme, refer to the chapter Washing programmes.

• The position 800 is equivalent to 800 rpm/min for the

synthetic and wool programmes and 700 rpm/min for

the delicate wash programme.

• The position 400 is equivalent to 400 rpm/min for all

the wash programmes.

Select the desired option by means of buttons 2, 3,

4 and 5

Depending on the programme, different functions can be

combined. These must be selected after choosing the de-

sired programme and before pressing the button 6.The

relevant light will illuminate.

If an incorrect option is selected, the corresponding indi-

cator lamp flashes for about 2 seconds. For the compati-

bility of the options with the washing programmes, refer to

the chapter «Washing programmes».

Start the programme by pressing button 6

To start the selected programme, press this button; the

corresponding pilot light stops flashing and remains lit.

On programme progress display the pilot lights A and E

illuminate to indicate that the appliance starts operating

and the door is locked.

Altering an option or a running programme

It is possible to change any option before the programme

carries it out.

Before you make any change, you must pause the washing

machine by pressing the button 6.

The programme can be changed as long as the button 6

has not been pressed. Changing a running programme is

possible only by resetting it. Turn the programme selector

dial to

and then to the new programme position. Start

the new programme by pressing the button 6 again.

Interrupting a programme

Press the button 6 to interrupt a programme which is run-

ning, the corresponding light starts to flash. Press the

button again to restart the programme.

Cancelling a programme

Turn the selector dial to position to cancel a pro-

gramme which is running. Now you can select a new pro-

gramme.

Opening the door after the programme has started

First set the machine to pause by pressing the button 6.

After some minutes, the door can be opened, when the

following conditions are observed:

• The water temperature is below 55°C.

• The water level is below the bottom edge of the door.

• The machine doesn’t spin.

If you cannot open the door but it is absolutely necessary

to open it you have to switch the machine off by turning

the selector dial to

. After few minutes the door can be

opened

(Pay attention to the water level and temperature!).

After this procedure, it will be necessary to set the pro-

gramme and the options again and then press the button

At the end of the programme

The machine stops automatically.

The pilot light D illuminates to indicate that the pro-

gramme has finished. The pilot light E goes out, the door

can be opened and the laundry can be removed.

If at the end of a programme there is water in the tub

(when "Rinse hold" option has been selected), to empty

out the water follow the following instructions:

•

turn the programme selector dial to

• select the «Drain» or «Spin» programme

• press button 6

When the pilot light E goes out, the door can be opened

and the laundry can be removed.

At the end of the cycle, turn the programme selector dial

to switch the machine off.

Remove the laundry from the drum and carefully check

that the drum is empty. If you do not intend to carry out

another wash, close the water tap.

Leave the door open to prevent the formation of mildew

and unpleasant smells.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each garment label and

the manufacturer’s washing instructions. Sort the laundry

as follows: whites, coloureds, synthetics, delicates, wool-

lens.

Temperatures

95° or 90°

for normally soiled white cottons

and linen (e.g. tea cloths, towels, ta-

blecloths, sheets...)

60°/50°

for normally soiled, colour fast gar-

ments (e.g. shirts, night dresses,

pyjamas....) in linen, cotton or syn-

thetic fibres and for lightly soiled

white cotton (e.g. underwear)

40°-30°- Cold

for delicate items (e.g. net curtains),

mixed laundry including synthetic

fibres and woollens bearing the la-

bel «pure new wool, machine wash-

able, non-shrink»

Before loading the laundry

Never wash whites and coloureds together. Whites may

lose their «whiteness» in the wash.

New coloured items may run in the first wash; they should

therefore be washed separately the first time.

Make sure that no metal objects are left in the laundry

(e.g. hair clips, safety pins, pins).

Button up pillowcases, close zip fasteners, hooks and

poppers. Tie any belts or long tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special detergent or

detergent paste.

Treat curtains with special care. Remove hooks or tie them

up in a bag or net.

Maximum loads

Recommended loads are indicated in the washing pro-

gramme charts.

General rules:

• Cotton, linen: drum full but not too tightly packed;

• Synthetics: drum no more than half full;

• Delicate fabrics and woollens: drum no more than one

third full.

Washing a maximum load makes the most efficient use of

water and energy.

For heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

quilt cover 700 g

man’s work shirt 600 g

sheet, man’s pyjamas 500 g

tablecloth 250 g

pillow case, towelling towel, night

dress, man’s shirt

200 g

tea cloth, ladies’ briefs, napkin,

blouse, men’s underpants

100 g

Removing stains

Stubborn stains may not be removed by just water and de-

tergent. It is therefore advisable to treat them prior to

washing.

Blood: treat fresh stains with cold water. For dried stains,

soak overnight in water with a special detergent then rub

in the soap and water.

Oil based paint: moisten with benzine stain remover, lay

the garment on a soft cloth and dab the stain; treat several

times.

Dried grease stains: moisten with turpentine, lay the gar-

ment on a soft surface and dab the stain with the fingertips

and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust removing

product used cold. Be careful with rust stains which are

not recent since the cellulose structure will already have

been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast

coloureds only).

Grass: soap lightly and treat with bleach (whites and fast

coloureds only).

Ball point pen and glue: moisten with acetone

, lay the

garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat stains

with methylated spirits. Treat any residual marks with

bleach.

Red wine: soak in water and detergent, rinse and treat with

acetic or citric acid, then rinse. Treat any residual marks

with bleach.

Ink: depending on the type of ink, moisten the fabric first

with acetone

, then with acetic acid; treat any residual

marks on white fabrics with bleach and then rinse thor-

oughly.

Tar stains: first treat with stain remover, methylated spirits

or benzine, then rub with detergent paste.

Detergents and additives

Good washing results also depend on the choice of deter-

gent and use of the correct quantities to avoid waste and

protect the environment.

Although biodegradable, detergents contain substances

which, in large quantities, can upset the delicate balance

of nature.

The choice of detergent will depend on the type of fabric

(delicates, woollens, cottons, etc.), the colour, washing

temperature and degree of soiling.

All commonly available washing machine detergents may

be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics (60°C max) and

woollens

• liquid detergents, preferably for low temperature wash

programmes (60°C max) for all types of fabric, or spe-

cial for woollens only.

The detergent and any additives must be placed in the ap-

propriate compartments of the dispenser drawer before

starting the wash programme.

Prewash detergent is to be added straight into the

drum

If using liquid detergents, a programme without prewash

must be selected. Pour the liquid detergent into the deter-

gent compartment immediately before you start the pro-

gramme.

Your appliance incorporates a recirculation system which

allows an optimal use of the concentrated detergent.

Follow the product manufacturer’s recommendations on

quantities to use and do not exceed the «MAX» mark in

the detergent dispenser drawer.

Degrees of water hardness

Water hardness is classified in so-called “degrees” of

hardness. Information on hardness of the water in your

area can be obtained from the relevant water supply com-

pany, or from your local authority. If the water hardness

degree is medium or high we suggest you to add a water

softener following always the manufacturer’s instructions.

When the degree of hardness is soft, readjust the quantity

of the detergent.

1) do not use acetone on artificial silk

Washing programmes

Programme/ Temperature Type of laundry Available options

Description of the pro-

gramme

COTTON

(COTTON)

90°

White cotton (heavily

soiled cotton items)

SPIN REDUCTION/RINSE

HOLD - QUICK/DAILY

ECONOMY -PREWASH -

EASY IRON

Main wash

Rinses

Long spin max. 800 rpm

Max load 3 kg

COTTON

(COTTON)

60° - 30°

Coloured cotton (normally

soiled cotton items)

SPIN REDUCTION/RINSE

HOLD - QUICK/DAILY

ECONOMY

-PREWASH -

EASY IRON

Main wash

Rinses

Long spin max. 800 rpm

Max load 3 kg

SYNTHETIC

(SYNTHETIC )

60°- 30°

Synthetic or mixed fabrics:

underwear, coloured gar-

ments, non-shrink shirts,

blouses.

SPIN REDUCTION/RINSE

HOLD - QUICK/DAILY -

ECONOMY

- PREWASH -

EASY IRON

Main wash

Rinses

Short spin max. 800 rpm

Max Load 1,5 kg

DELICATE

(DELICATE)

40° - (COLD)

Delicate fabrics: acrylics,

viscose, polyester. Also

delicate fabrics with «hand

washing» care symbol.

SPIN REDUCTION/RINSE

HOLD - QUICK - PRE-

WASH

Main wash

Rinses

Short spin max. 700 rpm

Max Load 1,5 kg

WOOL

(WOOL)

30°-

(COLD)

Washing programme for

machine washable wool as

well as for hand washable

woollens and delicate fab-

rics.

SPIN REDUCTION/RINSE

HOLD

Main wash

Rinses

Short spin max. 800 rpm

Max Load 1 kg

RINSES

With this programme it is

possible to rinse and spin

cotton garments which

have been washed by hand.

The machine performs 3

rinses, followed by a final

long spin. The spin speed

can be reduced.

SPIN REDUCTION/RINSE

HOLD - EASY IRON

Rinses

Spin max. 1000 rpm

Max Load 3 kg

DRAIN

For emptying out the water

of the last rinse in pro-

grammes with the Rinse

Hold or No spin option se-

lected.

Draining of water

Max Load 3 kg

Programme/ Temperature Type of laundry Available options

Description of the pro-

gramme

SPIN

Separate spin for hand

washed garments and after

programmes with the Rinse

Hold option selected. You

can choose the spin speed

by turning the spin speed

selector to adapt it to the

fabrics to be spun.

SPIN REDUCTION

Drain and long spin

Max. spin speed 800 rpm

Max Load 3 kg

/OFF

For resetting the pro-

gramme or switching the

machine off

1) If you select this option, we recommend that you reduce the maximum load. Recommended load for cotton is 2 kg. This option

cannot be selected together with Economy option.

2) Available at the temperature 60° and 40°.

3) Available at the temperature 60°.

Care and cleaning

Important! You must DISCONNECT the appliance from the

electricity supply, before you can carry out any cleaning or

maintenance work.

Descaling

The water we use normally contains lime. It is a good idea

to periodically use a water softening powder in the ma-

chine. Do this separately from any laundry washing, and

according to the softening powder manufacturer's instruc-

tions. This will help to prevent the formation of lime de-

posits.

Maintenance Wash

With the use of low temperature washes it is possible to

get a build up of residues inside the drum.

We recommend that a maintenance wash be performed on

a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must be a powder

with biological properties.

External cleaning

Clean the exterior cabinet of the appliance with soap and

water only, and then dry thoroughly.

Cleaning the dispenser drawer

The washing powder and additive dispenser drawer

should be cleaned regularly.

If necessary, the whole de-

tergent drawer can be tak-

en out of the machine for

cleaning. You need to pull

it firmly outwards, so that

it comes free of retaining

stop.

To remove the siphon at

the inside edge of the

drawer for cleaning, you

need to press it inwards

and pull it upwards at the

same time. Flush it out

under a tap, to remove any

traces of accumulated

powder.

When you put it back, press it downwards until you hear a

distinct click.

Cleaning the drawer recess

Having removed the draw-

er, use a small brush to

clean the recess, ensuring

that all washing powder

residue is removed from

the upper and lower part of

the recess.

Replace the drawer and run the rinse programme with-

out any clothes in the drum.

Cleaning the water inlet filter

If your water is very hard or contains traces of lime depos-

it, the water inlet filter may become clogged. It is therefore

a good idea to clean it from time to time.

Turn off the water tap. Un-

screw the water inlet hose.

Clean the filter using a

hard bristle brush. Tighten

up the inlet hose.

The dangers of freezing

If the machine is exposed to temperatures below 0°C, cer-

tain precautions should be taken.

• Turn off the water supply.

• Unscrew the inlet hose from the supply tap.

• Select a wash programme, start the machine and let the

programme run for a short time.

• Interrupt the programme by turning the programme se-

lector to

position.

• Place the end of inlet and drain hoses down low, into

the waste gully (floor drain) set into the floor. Make

sure that the end of the hose does not go below the wa-

ter level in the gully's (drain's) water tap.

• Select the programme "Drain" and let it run until it is

finished.

•

Turn the programme selector to

position. When

you intend to start the machine up again, make sure

that the room temperature is above 0 °C.

The appliance is only to be used and stored indoors at

normal room temperature. The manufacturer is not re-

sponsible for any frost damage.

What to do if…

Certain problems are due to lack of simple maintenance or

oversights, which can be solved easily without calling out

an engineer. Before contacting your local Service Centre,

please carry out the checks listed below.

During machine operation it is possible that the End pilot

light blinks to indicate that the machine is not working:

• 1 flash: problem with the water supply.

• 2 flashes: problem with the water draining.

• 4 flashes: door open.

Once the problem has been eliminated, press the button

START to restart the programme. If after all checks, the

problem persists, contact your local Service Centre.

Problem Possible cause/Solution

The machine does not start:

The door has not been closed.

• Close the door firmly.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and the button Start has not been

pressed.

• Please turn the selector dial and press the button Start again.

The machine does not fill:

The water tap is closed.

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose is blocked.

• Clean the water inlet hose filter.

The door is not properly closed.

• Close the door firmly.

The machine fills then empties im-

mediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «Installation» chapter.

The machine does not empty and/or

does not spin:

The drain hose is squashed or kinked.

• Check the drain hose connection.

An option or a programme that ends with the water still in the tub or that elimi-

nates all the spinning phases has been selected.

• Select the draining or spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent (creates too much foam) has been

used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the inlet hose fittings. It is not

always easy to see this as the water runs down the hose; check to see if it is

damp.

• Check the water inlet hose connection.

The drain or inlet hose is damaged.

• Change it with a new one.

Problem Possible cause/Solution

Unsatisfactory washing results:

Too little detergent or unsuitable detergent has been used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to washing.

• Use commercial products to treat the stubborn stains.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

The door will not open:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the indicator light for door locked has gone out.

There is water in the drum.

• Select drain or spin programme to empty out the water.

The machine vibrates is noisy:

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Spinning starts late or the machine

does not spin:

The electronic unbalance detection device has cut in because the laundry is

not evenly distributed in the drum. The laundry is redistributed by reverse rota-

tion of the drum. This may happen several times before the unbalance disap-

pears and normal spinning can resume. If, after 10 minutes, the laundry is still

not evenly distributed in the drum, the machine will not spin. In this case ,re-

distribute the load manually and select the spin programme.

• Redistribute the laundry.

The load is too small.

• Add more items, redistribute the load manually and then select the spinning

programme.

No water is visible in the drum:

Machines based on modern technology operate very economically using very

little water without affecting performance.

If you are unable to identify or solve the problem, contact

our service centre. Before telephoning, make a note of the

model, serial number and purchase date of your machine:

the Service Centre will require this information.

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ... ... ...

Technical data

Dimensions Width

Height

Depth

50 cm

67 cm

55 cm

Level of protection against ingress of solid particles and moisture ensured by

the protective cover, except where the low voltage equipment has no protec-

tion against moisture

IPX4

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load Cotton 3 kg

Spin Speed Maximum 800 rpm

Electrical data Voltage

Overall power

Fuse

Frequency

230 V

1600 W

10 A

50 Hz

Consumption values

Programme Energy consumption

(kWh)

Water consumption (li-

tres)

Programme duration (mi-

nutes)

White Cottons 90° 1.43 44 ~ 126

Cottons 60° 0.78 44 ~ 107

Synthetic 60° 0.57 42 ~ 82

Synthetic 40° 0.26 42 ~ 67

Delicate 40° 0.38 45 ~ 61

Hand Wash 30° 0.20 42 ~ 50

Programme Energy consumption

(kWh)

Water consumption (li-

tres)

Programme duration (mi-

nutes)

Wool 30° 0.35 45 ~ 50

Rinses 0.03 30 ~ 27

Drain - - ~ 1

Spin - - ~ 5

1) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type of laundry, on the

temperature of the water supply and on the ambient temperature.

Standard programmes for the Energy Label consumption

values

The cotton 60 °C and cotton 40 °C with Economy option

selected are the standard programmes for normally soiled

cotton laundry. They are the most efficient programmes in

terms of combined energy and water consumption for

washing that type of cotton laundry.

They agree with EN60456.

The actual water temperature may differ from the de-

clared cycle temperature.

Installation

Lifting the machine

Be careful when lifting the machine. Incorrect methods of

lifting can cause physical injuries and also increase the

risk of damage to the machine. Open the door and take

hold of the top inside of the door opening. You can also

lift the machine by gripping the rear overhang of the top.

Warning! Never lift the machine by gripping it’s

control panel, door, or detergent dispenser.

Unpacking

When supplied the washing machine is packed using a

number of locking devices/packing pieces to prevent

drum and motor from damage in transit All transit bolts

and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can

be refitted if the machine ever has to be transported again.

Spread some of the poly-

styrene packaging materi-

als on the floor behind the

machine and then lay the

machine carefully rear

side down on them. Make

sure that no hoses are

crushed in the process.

Remove the polystyrene

base from the bottom of

the appliance.

Return machine to it's upright position and remove the

power supply cable and the draining and inlet hose

from the hose holders on the rear of the appliance.

With a suitable spanner unscrew and remove the three

screws and their spacers on machine's rear.

The three holes must then

be plugged with the plastic

plug caps supplied in the

bag containing the in-

struction booklet, which

can be found inside the

drum.

Positioning

Install the machine on a flat hard floor. Make sure that air

circulation around the machine is not impeded by carpets,

rugs etc. Check that the machine does not touch the wall

or furniture. Level the washing machine by raising or low-

ering the two front feet. If necessary, check the setting with

a spirit level. Any necessary adjustment can be made with

a spanner. Accurate levelling prevents vibration, noise and

displacement of the machine during operation.

Caution! Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

Water inlet

Warning! This appliance must be connected to a

cold water supply

Caution! Before connecting up the appliance to new

pipework or to pipework that has not been used for

some time, run off a reasonable amount of water to flush

out any debris that may have collected

Caution! Do not use the hose from your previous

appliance to connect to water supply.

Connect the hose to a tap

with a 3/4” thread. Always

use the hose supplied with

the appliance.

The machine end of the in-

let hose can be turned in

any direction. Set the hose

correctly by loosening the

ring nut. After positioning

the inlet hose, be sure to

tighten the ring nut again

to prevent leaks.

The inlet hose must not be lengthened. If it is too short

and you do not wish to move the tap, you will have to pur-

chase a new, longer hose specially designed for this type

of use.

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the plastic hose

guide supplied with the machine.

In this case, make sure the end cannot come unhooked

when the machine is emptying. This could be done by ty-

ing it to the tap with a piece of string or attaching it to the

wall.

In a sink drain pipe with a trap.

650-800 mm

The drain hose can be connected directly into the pipe

(e.g. beneath a washtub or sink), above the water trap. The

drain hose must be arranged so that some part of it’s

length is routed up to a level corresponding to the top

edge of the tub and fixed in place there.

Directly into a drain pipe at a height of not less than 65

cm and not more than 80 cm.

Their must be an air gap around and below the end of

drain hose. This means that the internal diameter of the

standpipe must be larger than the outer diameter of the

hose.

650-800 mm

40 mm

The hose must not be sticked into the standpipe more

than 50 mm and it has to be fixed in this position. The

drain hose must not be kinked.

The drain hose can be extended up to total 3,5 m. For the

extension piece use a hose with an internal diameter at

least as large as that of the machine's own hose. Use a

suitable hose connector.

Information on the electrical connection is given on the

rating plate on the inner edge of the appliance door.

Check that your domestic electrical installation can take

the maximum load required, also taking into account any

other appliances in use.

Caution! Connect the machine to an earthed socket.

Caution! The manufacturer does not accept any

responsibility for damage or injury through failure

to comply with the above safety precaution.

Caution! The power supply cable must be easily

accessible after installing the machine.

Caution! Should the appliance power supply cable

need to be replaced, this must be carried out by a

Service Centre.

Environment concerns

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please contact

your local council, your household waste disposal service

or the shop where you purchased the product.

Packaging materials

The materials marked with the symbol are recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by disposing of

them properly in appropriate collection containers.

Ecological hints

To save water, energy and to help protect the environment,

we recommend that you follow these tips:

• Normally soiled laundry may be washed without pre-

washing in order to save detergent, water and time (the

environment is protected too!).

• The machine works more economically if it is fully loa-

ded.

• With adequate pre-treatment, stains and limited soiling

can be removed; the laundry can then be washed at a

lower temperature.

• Measure out detergent according to the water hard-

ness, the degree of soiling and the quantity of laundry

being washed.

Страница загружается ...

Zanussi FCS825C Руководство пользователя

Бренд: Zanussi

Модель: FCS825C

Категория: Стиральные машины

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

на других языках

English: Zanussi FCS825C User manual

Zanussi FCS825C Руководство пользователя

Zanussi FCS825C Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов