MSI H410M-A PRO, 7C89 Инструкция по применению

  • Здравствуйте! Я ознакомился с руководством пользователя для материнских плат MSI H410M PRO, H410M-A PRO и H410M PRO-VH. Готов ответить на ваши вопросы о характеристиках, установке и настройке этих устройств. В руководстве подробно описана установка процессора, оперативной памяти, накопителей, а также настройка BIOS и установка драйверов. Спрашивайте!
  • Как войти в BIOS?
    Как сбросить настройки BIOS?
    Какие разъемы для подключения накопителей есть на материнской плате?
    Какую максимальную оперативную память поддерживает материнская плата?
1
󷸺󳜼 Contents
Contents
2
3
 7
LAN Port LED Status Table ........................................................................................7
8
CPU Socket .................................................................................................................9
DIMM Slots................................................................................................................10
M2_1~2: M.2 Slots ...................................................................................................10
PCI_E1~2: PCIe Expansion Slots ..............................................................................11
SATA1~4: SATA 6Gb/s Connectors ...........................................................................11
JFP1, JFP2: Front Panel Connectors .......................................................................12
JAUD1: Front Audio Connector ................................................................................12
ATX_PWR1, CPU_PWR1: Power Connectors ...........................................................13
JUSB1: USB 2.0 Connector ......................................................................................14
JUSB2: USB 3.2 Gen 1 5Gbps Connector .................................................................14
CPU_FAN1, SYS_FAN1: Fan Connectors .................................................................15
JTPM1: TPM Module Connector ...............................................................................15
JCI1: Chassis Intrusion Connector ...........................................................................16
JCOM1: Serial Port Connector .................................................................................16
JBAT1: Clear CMOS (Reset BIOS) Jumper ...............................................................17
EZ Debug LED ...........................................................................................................17
JRGB1: RGB LED connector (H410M PRO) ..............................................................18
JRAINBOW1: Addressable RGB LED connector (H410M PRO) ...............................18
19
BIOS Setup ................................................................................................................20
Entering BIOS Setup .................................................................................................20
Resetting BIOS ..........................................................................................................20
Updating BIOS...........................................................................................................21
22
Installing Windows
®
10..............................................................................................22
Installing Drivers ......................................................................................................22
Installing Utilities .....................................................................................................22
Thank you for purchasing the MSI
®

motherboard. This User Guide gives
information about board layout, component overview, BIOS
setup and software installation.
2


The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
Hold the motherboard by the edges to avoid touching sensitive components.
It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard.
Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
If you need help during any installation step, please consult a certified computer
technician.
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
Keep this user guide for future reference.
Keep this motherboard away from humidity.
Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
All cautions and warnings on the motherboard should be noted.
If any of the following situations arises, get the motherboard checked by service
personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to
user guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
Do not leave this motherboard in an environment above 60°C (140°F), it may
damage the motherboard.
3
 


Supports 10th Gen Intel® Core™ and Pentium® Gold / Celeron®
processors for LGA 1200 socket*
* Please go to www.intel.com for more compatibility
information.
* Onboard graphics output are disabled when using F SKU
processors.
 Intel®
H410 chipset

2x DDR4 memory slots, support up to 64GB*
Intel® Core™ i7/ i9
Supports up to DDR4 2933 MHz
Intel® Core™ i5 and below
Supports up to DDR4 2666 MHz
Supports Dual-Channel mode
Supports non-ECC, un-buffered memory
Supports Intel® Extreme Memory Profile (XMP)
* Please refer www.msi.com for more information on
compatible memory.

1x PCIe 3.0 x16 slot (From CPU)
1x PCIe 3.0 x1 slot (From PCH)
1x M.2 slot with E key for WiFi module only


1x VGA port, supports a maximum resolution of 2048x1536
@50Hz, 2048x1280 @60Hz, 1920x1200 @60Hz (H410M PRO &
H410M PRO-VH)
1x DVI-D port, supports a maximum resolution of 1920x1200
@60Hz (H410M PRO & H410M-A PRO)
1x HDMI™ 1.4 port, supports a maximum resolution of
4096x2160 @30Hz

Realtek® ALC892/ ALC897 Codec
7.1-Channel High Definition Audio
 1x Intel® I219V Gigabit LAN controller
Continued on next page
4

Continued from previous page

Intel® H410 Chipset
4x SATA 6Gb/s ports*
1x M.2 slot (Key M)
M2_1 supports up to PCIe 3.0 x4 and SATA 6Gb/s, 2242/
2260/ 2280 storage devices*
* SATA4 will be unavailable when installing M.2 SATA SSD in
the M.2 slot.

Intel® H410 Chipset
4x USB 3.2 Gen 1 5Gbps ports (2 Type-A ports on the back
panel, 2 ports available through the internal USB 3.2 Gen 1
5Gbps connector)
6x USB 2.0 ports (4 Type-A ports on the back panel, 2 ports
available through the internal USB 2.0 connector)


1x 24-pin ATX main power connector
1x 8-pin ATX 12V power connector
4x SATA 6Gb/s connectors
1x USB 2.0 connector (supports additional 2 USB 2.0 ports)
1x USB 3.2 Gen1 5Gbps connector (supports additional 2
USB 3.2 Gen1 5Gbps ports)
1x 4-pin CPU fan connector
1x 4-pin system fan connector
1x Front panel audio connector
2x Front panel connectors
1x Serial port connector
1x TPM module connector
1x Chassis Intrusion connector
1x Clear CMOS jumper
1x 4-pin RGB LED connector (H410M PRO)
1x 3-pin RAINBOW LED connector (H410M PRO)
4x EZ Debug LED
Continued on next page
5
 
Continued from previous page


1x VGA port (H410M PRO & H410M PRO-VH)
1x DVI-D port (H410M PRO & H410M-A PRO)
1x HDMI port
2x USB 3.2 Gen1 5Gbps Type-A ports
1x PS/2 keyboard/ mouse combo port
4x USB 2.0 Type-A ports
1x LAN (RJ45) port
3x audio jacks
 NUVOTON NCT5887D Controller Chip


CPU/System temperature detection
CPU/System fan speed detection
CPU/System fan speed control

Micro-ATX Form Factor
9.3 in. x 7.5 in. (23.6 cm x 19.0 cm)

1x 128 Mb flash
UEFI AMI BIOS
Multi-language

Drivers
DRAGON CENTER
CPU-Z MSI GAMING
Intel® Extreme Tuning Utility
Google Chrome™, Google Toolbar, Google Drive
Norton™ Internet Security Solution
Continued on next page
6

Continued from previous page


LAN Manager
Mystic Light (H410M PRO)
User Scenario
Hardware Monitor
True Color
Live Update
DPC Latency Tuner
Speed Up
Smart Tool
Super Charger
Please refer to http://
download.msi.com/manual/
mb/DRAGONCENTER2.pdf for
more details.
7
 


 
Off No link
Yellow Linked
Blinking Data activity

 
Off 10 Mbps connection
Green 100 Mbps connection
Orange 1 Gbps connection

PS/2 Mouse/
Keyboard
LAN
USB 2.0 Type-A
USB 3.2 Gen 1
5Gbps Type-A
Mic-in
Line-in
Line-out

To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
 Click on the  to open the dialog
below.
 Select .
 Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device
is current connected.
(H410M PRO &
H410M PRO-VH)
VGA
DVI-D
(H410M PRO &
H410M-A PRO)
8


JCOM1
* Distance from the center of the CPU to the nearest DIMM slot.
SYS_FAN1
CPU_FAN1
CPU Socket
JARINBOW1
(H410M PRO)
M2_2
PCI_E2
PCI_E1
JBAT1
DIMMA1
DIMMB1
JTPM1
M2_1
SATA3
SATA4
SATA2
SATA1
JAUD1
ATX_PWR1
CPU_PWR1
JUSB2
JCI1
JUSB1
JFP2
JFP1
JRGB1
(H410M PRO)
50.89mm*
9
 

Please install the CPU into the CPU socket as shown below.

Always unplug the power cord from the power outlet before installing or removing
the CPU.
Please retain the CPU protective cap after installing the processor. MSI will deal
with Return Merchandise Authorization (RMA) requests if only the motherboard
comes with the protective cap on the CPU socket.
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
is necessary to prevent overheating and maintain system stability.

your system.
Overheating can seriously damage the CPU and motherboard. Always make sure
the cooling fans work properly to protect the CPU from overheating. Be sure to apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
If you purchased a separate CPU and heatsink/ cooler, Please refer to the docu-
mentation in the heatsink/ cooler package for more details about installation.
1
4
6
5
7
8
9
3
2
10


Please install the memory module into the DIMM slot as shown below.

Always insert memory modules in the 
To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial

frequency if you want to operate the memory at the marked or at a higher frequency.
󼶮
installation or overclocking.
The stability and compatibility of installed memory module depend on installed
CPU and devices when overclocking.
Please refer www.msi.com for more information on compatible memory.
1
1
2
3
3
2

Please install the M.2 device into the M.2 slot as shown below.
1
3
Standoff
Supplied
M.2 screw
30º30º
2
11
 


󼶫
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.
If you install a large and heavy graphics card, you need to use a tool such as 
 to support its weight to prevent deformation
of the slot.
: PCIe 3.0 x16 slot (CPU lanes)
: PCIe 3.0 x1 slot (PCH lanes)

These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
SATA3
SATA4
SATA1
SATA2

Please do not fold the SATA cable at a 90-degree angle. Data loss may result
during transmission otherwise.
SATA cables have identical plugs on either sides of the cable. However, it is

saving purposes.
SATA4 will be unavailable when installing M.2 SATA SSD in the M.2 slot.
12


These connectors connect to the switches and LEDs on the front panel.
1
2 10
9
+
+
+-
--
-
+
Power LED
HDD LED Reset Switch
Reserved
Power Switch
1 HDD LED + 2 Power LED +
3 HDD LED - 4 Power LED -
5 Reset Switch 6 Power Switch
7 Reset Switch 8 Power Switch
9 Reserved 10 No Pin
JFP2
1
+
+
-
-
Speaker
Buzzer
1 Speaker - 2 Buzzer +
3 Buzzer - 4 Speaker +
HDD LED
RESET SW
HDD LED
HDD LED -
HDD LED +
POWER LED -
POWER LED +
POWER LED
JFP1

This connector allow you to connect audio jacks on the front panel.
1
2 10
9
1 MIC L 2 Ground
3 MIC R 4 NC
5 Head Phone R 6 MIC Detection
7 SENSE_SEND 8 No Pin
9 Head Phone L 10 Head Phone Detection
13
 

These connectors allow you to connect an ATX power supply.

Make sure that all the power cables are securely connected to a proper ATX power
supply to ensure stable operation of the motherboard.
24
131
12
ATX_PWR1
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 Ground 15 Ground
4 +5V 16 PS-ON#
5 Ground 17 Ground
6 +5V 18 Ground
7 Ground 19 Ground
8 PWR OK 20 Res
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 Ground
5
4
1
8
CPU_PWR1
1 Ground 5 +12V
2 Ground 6 +12V
3 Ground 7 +12V
4 Ground 8 +12V
14


This connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.
1
10 11
20
1 Power 11 USB2.0+
2 USB3_RX_DN 12 USB2.0-
3 USB3_RX_DP 13 Ground
4 Ground 14 USB3_TX_C_DP
5 USB3_TX_C_DN 15 USB3_TX_C_DN
6 USB3_TX_C_DP 16 Ground
7 Ground 17 USB3_RX_DP
8 USB2.0- 18 USB3_RX_DN
9 USB2.0+ 19 Power
10 Ground 20 No Pin

Note that the Power and Ground pins must be connected correctly to avoid possible
damage.

These connectors allow you to connect USB 2.0 ports on the front panel.

Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI® DRAGON CENTER utility.
1
2 10
9
1 VCC 2 VCC
3 USB0- 4 USB1-
5 USB0+ 6 USB1+
7 Ground 8 Ground
9 No Pin 10 NC
15
 

You can adjust fan speed in 

PWM Mode fan connectors provide constant 12V output and adjust fan speed with
speed control signal. When you plug a 3-pin (Non-PWM) fan to a fan connector in
PWM mode, the fan speed will always maintain at 100%, which might create a lot of
noise.
1

1 Ground 2 +12V
3 Sense 4 Speed Control Signal






CPU_FAN1 PWM mode 1A 12W
SYS_FAN1 DC mode 1A 12W
1

1 Ground 2 Voltage Control
3 Sense 4 NC
1
2
12
11
1 SPI Power 2 SPI Chip Select
3
Master In Slave Out (SPI
Data)
4
Master In Slave In (SPI
Data)
5 Reserved 6 SPI Clock
7 Ground 8 SPI Reset
9 Reserved 10 No Pin
11 Reserved 12 Interrupt Request

This connector is for TPM (Trusted Platform Module). Please refer to the TPM
security platform manual for more details and usages.
16


This connector allows you to connect the chassis intrusion switch cable.
Normal
(default)
Trigger the chassis
intrusion event

 Connect the  connector to the chassis intrusion switch/ sensor on the
chassis.
 Close the chassis cover.
 Go to .
 Set  to .
 Press F10 to save and exit and then press the  key to select .
 Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.

 Go to .
 Set  to Reset.
 Press to save and exit and then press the  key to select .

This connector allows you to connect the optional serial port with bracket.
1
2 10
9
1 DCD 2 SIN
3 SOUT 4 DTR
5 Ground 6 DSR
7 RTS 8 CTS
9 RI 10 No Pin
17
 

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Keep Data
(default)
Clear CMOS/ Reset
BIOS

 Power off the computer and unplug the power cord.
 Use a jumper cap to short JBAT1 for about 5-10 seconds.
 Remove the jumper cap from JBAT1.
 Plug the power cord and power on the computer.

These LEDs indicate the status of the motherboard.
 - indicates CPU is not detected or fail.
 - indicates DRAM is not detected or fail.
 - indicates GPU is not detected or fail.
 - indicates booting device is not detected or fail.
18


The JRGB connector allows you to connect the 5050 RGB LED strips 12V.

The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips
(12V/G/R/B) with the maximum power rating of 3A (12V).
󼶫
before installing or removing the RGB LED strip.
Please use MSI’s software to control the extended LED strip.

The JRAINBOW connector allows you to connect the WS2812B Individually
Addressable RGB LED strips 5V.

Do not connect the wrong type of LED strips. The JRGB connector and the JRAINBOW
connector provide different voltages, and connecting the 5V LED strip to the JRGB
connector will result in damage to the LED strip.

The JRAINBOW connector supports up to 75 LEDs WS2812B Individually Address-
able RGB LED strips (5V/Data/Ground) with the maximum power rating of 3A (5V). In
the case of 20% brightness, the connector supports up to 200 LEDs.
󼶫
before installing or removing the RGB LED strip.
Please use MSI’s software to control the extended LED strip.
1
1 +12V 2 G
3 R 4 B
1
1 +5V 2 Data
3 No Pin 4 Ground
19
 

MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface)
architecture. UEFI has many new functions and advantages that traditional BIOS
cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI
BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s
capabilities. However, it still has a CSM (Compatibility Support Module) mode to be
compatible with older devices. That allows you to replace legacy devices with UEFI
compatible devices during the transition.

The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.

Fast booting - UEFI can directly boot the operating system and save the BIOS self-
test process. And also eliminates the time to switch to CSM mode during POST.
Supports for hard drive partitions larger than 2 TB.
Supports more than 4 primary partitions with a GUID Partition Table (GPT).
Supports unlimited number of partitions.
Supports full capabilities of new devices - new devices may not provide backward
compatibility.
Supports secure startup - UEFI can check the validity of the operating system to
ensure that no malware tampers with the startup process.

- this motherboard supports only 64-bit
Windows 10 operating system.
 - the system will detect your graphics card. When display a
warning message 


We recommend that you to use a GOP/ UEFI compatible graphics card.

After entering the BIOS, find the BIOS Mode at the top of the screen.
 









CSM
20


The default settings offer the optimal performance for system stability in normal
conditions. You should  to avoid possible system
damage or failure booting unless you are familiar with BIOS.

BIOS items are continuous update for better system performance. Therefore, the
󼶫
reference only. You could also refer to the  information panel for BIOS item
description.
The BIOS items will vary with the processor.

Press  key, when the
 message appears on the screen during the boot process.

F1: General Help
F2: Add/ Remove a favorite item
F3: Enter Favorites menu
F4: Enter CPU Specifications menu
F5: Enter Memory-Z menu
F6: Load optimized defaults
F7: Switch between Advanced mode and EZ mode
F8: Load Overclocking Profile
F9: Save Overclocking Profile
F10: Save Change and Reset*
F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
: Enter Search page
* When you press F10, a confirmation window appears and it provides the
modification information. Select between Yes or No to confirm your choice.

You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
Go to BIOS and press F6 to load optimized defaults.
Short the  jumper on the motherboard.

Please refer to the jumper section for resetting BIOS.
/