Yamaha CDX-470 Руководство пользователя

IMPORTANT!

Please record the serial number of this

unit in the space below.

Model:

Serial No.:

The serial number is located on the rear

of the unit.

Retain this Owner’s Manual in a safe

place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK), NO USER-SERVICEABLE

PARTS INSIDE, REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

•

Explanation of Graphical Symbols

CAUTION

Natural Sound Compact Disc Player

Random Access Programmable Play

Random-Sequence Play

Single Track/Entire Disc Repeat Play

Automatic Tape-Programming

Automatic Peak Level Searching Capability

Display Brightness Changing Capability

Remote Control Capability

CDX-470

Thank you for selecting this YAMAHA Compact Disc Player.

OWNER’S MANUAL

CONTENTS

Safety Instructions.................... 2

Connections............................. 4

Identification of Components.... 5

Loading the Disc/Disc Play....... 6

Random-Sequence Play .......... 9

Repeat Play.............................. 9

Program Play.......................... 10

Index Search.......................... 11

Track Programming for

Recording to Tape ................. 12

Notes about the Remote

Control Transmitter................. 16

Notes about Handling

Compact Discs....................... 16

Troubleshooting...................... 17

Specifications......................... 17

SAFETY INSTRUCTIONS

1 Read Instructions – All the safety and operating

instructions should be read before the unit is operated.

2 Retain Instructions – The safety and operating

instructions should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other instructions

should be followed.

5 Water and Moisture – The unit should not be used near

water – for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a swimming

pool, etc.

6 Carts and Stands – The unit should be used only with a

cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the unit and cart combination

to overturn.

7 Wall or Ceiling Mounting – The unit should be mounted to

a wall or ceiling only as recommended by the

manufacturer.

8 Ventilation – The unit should be situated so that its

location or position does not interfere with its proper

ventilation. For example, the unit should not be situated

on a bed, sofa, rug, or similar surface, that may block the

ventilation openings; or placed in a built-in installation,

such as a bookcase or cabinet that may impede the flow

of air through the ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances

that produce heat.

10 Power Sources – The unit should be connected to a

power supply only of the type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should be

unplugged from the outlet when left unused for a long

period of time.

14 Object and Liquid Entry – Care should be taken so that

objects do not fall into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The unit should be serviced

by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into the

unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet damaged.

16 Servicing – The user should not attempt to service the

unit beyond those means described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17 Power Lines – An outdoor antenna should be located

away from power lines.

18 Grounding or Polarization – Precautions should be taken

so that the grounding or polarization is not defeated.

1 To ensure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install your unit in a cool, dry, clean place – away from

windows, heat sources, and too much vibration, dust,

moisture or cold. Avoid sources of hum (transformers,

motors). To prevent fire or electrical shock, do not

expose to rain and water.

3 Do not operate the unit upside-down. It may overheat,

possibly causing damage.

4 Never open the cabinet. If a foreign object drops into the

set, contact your dealer.

5 Do not use force on switches, knobs or cords. When

moving the set, first turn the unit off. Then gently

disconnect the power plug and the cords connecting to

other equipment. Never pull the cord itself.

6 Do not attempt to clean the unit with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

7 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that your unit

is faulty.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT

As the laser beam used in this compact disc player is harmful

to the eyes, do not attempt to disassemble the cabinet. Refer

servicing to qualified personel only.

To avoid electrical shock, do not open the unit. Refer

servicing to qualified personnel only.

DANGER: The use of optical instrument with this product will

increase eye hazard.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

DANGER

Invisible laser radiation when open and interlock failed or

defeated.

Avoid direct exposure to beam.

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group want you to get the most out of

your equipment by playing it at a safe level.

One that lets the sound come through loud and clear without

annoying blaring or distortion – and, most importantly, without

affecting your sensitive hearing. Since hearing

damage from loud sounds is often undetectable

until it is too late, YAMAHA and the Electronic

Industries Association’s Consumer Electronics

Group recommend you to avoid prolonged

exposure from excessive volume levels.

We Want You Listening For A Lifetime

3. NOTE : This product has been tested and found to

comply with the requirements listed in FCC Regulations,

Part 15 for Class “B” digital devices. Compliance with

these requirements provides a reasonable level of

assurance that your use of this product in a residential

environment will not result in harmful interference with

other electronic devices.

This equipment generates/uses radio frequencies and, if

not installed and used according to the instructions found

in the users manual, may cause interference harmful to

the operation of other electronic devices. Compliance with

FCC regulations does not guarantee that interference will

not occur in all installations. If this product is found to be

the source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to eliminate

the problem by using one of the following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

WARNING

1 IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements.

Modifications not expressly approved by Yamaha may void

your authority, granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high quality

shielded cables. Cable/s supplied with this product MUST

be used. Follow all installation instructions. Failure to

follow instructions could void your FCC authorization to

use this product in the USA.

FCC INFORMATION

•

Before making any connections, switch OFF the power to

the unit and the amplifier or other component.

•

Connect the “LINE OUT” terminals to the “CD” (or “AUX”)

terminals of the amplifier. If the amplifier does not have such

terminals, use the “TAPE PB” terminals. For additional

details concerning these connections, refer to the operation

instructions for the amplifier being used.

•

Be sure that the left (“L”) and right (“R”) LINE OUT terminals

are connected to the corresponding (left and right) terminals

of the amplifier or other component.

•

If the placement of this unit causes noise to other equipment,

such as a tuner, separate them from each other.

CONNECTIONS

LINE OUT

This unit

Amplifier

To AC outlet

Connection cord (included)

FRONT PANEL

IDENTIFICATION OF COMPONENTS

REMOTE CONTROL TRANSMITTER

* The control functions on the main unit and on the remote

control transmitter are virtually identical, with the exceptions

below.

NATURAL SOUND COMPACT DISC PLAYER

POWER

OPEN/CLOSE

123 45 67 89 0

TIME

PEAK

TAPE

PROG

OUTPUT LEVEL

DOWN

PLAY

PAUSE

STOP

RANDOM

SKIP

REPEAT

PHONES

POWER switch

TAPE button

OPEN/CLOSE button

MODE button

INDEX button

OUTPUT LEVEL buttons

PROG button

REPEAT button

RANDOM button

PHONES jak

SEARCH button

SKIP button

STOP button

PAUSE button

PLAY button

PEAK button

Disc tray

Remote control sensor

Numeric buttons

Display panel

TIME display

modeselect button

DOWN

OUTPUT LEVEL

UP STOP

PLAY

MODE

123

456

789

INDEX

SKIP

OPEN/

Display information at disc play

➀

Shows the track number to be played.

➁

Shows the time displays. (Refer to “Selecting time

displays” on page 8.)

➂

Displays the numbers that correspond to the numbers of

tracks (as high as number 20) on the disc. After each

track is played, its corresponding number disappears so

the number of remaining tracks (and their numbers) can

be seen at a glance.

Notes

•

After closing the disc tray by pressing the OPEN/CLOSE

button, the display shows the total number of tracks and the

total recorded time of the disc for a few seconds.

•

Additionally, you can close the disc tray by pressing the

PLAY button, a numeric button or the RANDOM button, or

by pressing the front edge of the disc tray gently. If the tray

is closed in these ways, play will begin automatically,

however, the display will not show the total number of tracks

and the total recorded time of the disc.

LOADING THE DISC/DISC PLAY

LOGODISK

2, 3

POWER

OPEN/CLOSE

PLAY

Label side

upward

Disc tray

* To resume play, press the PAUSE button again or press the

PLAY button.

To stop play temporarily To stop play completely

To play a desired track on the disc

DIRECT PLAY

Select a desired track using the numeric button.

Example: To select track 25

Press

➀

twice, then immediately press

➁

once.

* If a track number higher than the highest track number on

the disc is selected, the last track on the disc will be

played.

SKIP PLAY

•

To play from the beginning of the track following the one now

playing

•

To play from the beginning of the track now playing

•

To play from the beginning of the track before the one now

playing

(twice)

* These operations can also be performed when the unit is in

the pause or stop mode.

To advance or reverse play rapidly (MANUAL SEARCH)

To advance rapidly

(Press and hold.)

To reverse rapidly

(Press and hold.)

•

The sound can be heard (although slightly garbled) during

manual search in either direction. This is convenient for

locating a precise position within a track, or for reviewing the

contents quickly.

•

Manual search can also be performed while disc play is

paused, though no sound will be heard.

PAUSE

34 5 6 78

STOP

SKIP

The selected trak

number is displayed

Selecting time displays

You can select any of the four time displays by pressing the TIME display modeselect button.

Note

The remaining time

➁

will not be displayed for track number

25 or higher.

Changing brightness of the display

If desired, you can change brightness of the display in three

degrees by pressing the MODE button.

Normal illumination

Slightly dim

Dim

When you listen with headphones

Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons.

At that time, note that this adjustment will also vary the signal level output to the amplifier.

➀

Elapsed time of the track now playing

➁

Remaining time of the track now playing

➃

Total remaining time on the disc

➂

Total disc play time

TIME

MODE

PHONES

OUTPUT LEVEL

DOWN UP

OUTPUT LEVEL

DOWN UP

PHONES

RANDOM-SEQUENCE PLAY

You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer.

To perform random-sequence play

To cancel random-sequence play

Notes

•

This feature will not function during programming, or during

programmed play.

•

If the POWER is switched off when the random-sequence

play mode is functioning, when the POWER is switched on

again, the unit will begin the random-sequence play

automatically. (This feature is available for timer play.)

•

If the SKIP button is pressed during random-sequence

play, the next randomly programmed track will be played. If

the SKIP button is pressed, play will return to the

beginning of the track now being played.

•

This indication appears while the unit is mixing

up tracks.

•

Total remaining time on the disc will not be displayed during

random-sequence play.

REPEAT PLAY

You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change

whenever you press the REPEAT button.

SINGLE (S) REPEAT

A single track is repeatedly played.

* This is also available in the programmed-play mode and the

random-sequence play mode.

(If the repeat play mode is switched off, the programmed-

play mode or the random-sequence play mode will be

resumed.

FULL (F) REPEAT

All tracks (the entire disc) are played repeatedly.

* In the programmed-play mode, all programmed tracks are

repeatedly played.

* In the random-sequence play mode, all randomly sequenced

tracks are repeatedly played in the same order.

RANDOM

STOP

REPEAT

(OFF)

1 Stop the unit.

3 Select the desired track.

* Repeat step 3 to set more programs.

You can select the same track again.

PROGRAM PLAY

You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be

programmed for a disc.

Display information during program play

➀

Shows the program number for the track to be set next.

➁

Shows the selected track number.

➂

Shows the total time of the tracks currently programmed.

➃

Shows only the numbers of programmed tracks.

* If “P-01” does not appear in the display after the PROG

button is pressed, press the TIME display mode-select

button.

* If the total time exceeds 99 minutes and 59 seconds, the

time will not be displayed.

Notes

•

In step 2, if “P-01” does not appear in the display, press the

TIME display mode-select button.

•

If, during programming, the TIME display mode-select button

is pressed, the program number display can be changed to

display the total time of the programmed tracks. To return to

the previous display, press the TIME display mode-select

button once again.

•

The SKIP ( and ) button can be used during playing,

but only within the range of the programmed tracks.

•

The SEARCH ( and ) button can be used during

playing to search through all tracks, including

unprogrammed tracks.

•

The PAUSE mode can also be programmed (one time only),

if so desired, by pressing the PAUSE button instead of a

numeric button. (In this case, “ B” is illuminated in the

display.)

•

If, for a compact disc with 25 tracks or more, track number

25 or higher is programmed, the total time will disappear

from the display.

LOGODISK

STOP

PROG

34 5 6 78

PLAY

1 Select a track which has index numbers.

3 Select the desired index number.

Notes

•

Not all discs have index numbers. The index system is a

method for sub-dividing tracks into smaller divisions (such

as, for example, the movements within classical

symphonies) for easier location of those parts. The liner

notes with the disc usually tell if such index numbers are

included.

•

If an index number is selected that is higher than any index

number on that disc, play will start from the last index

number point on the disc.

•

For some discs, play may begin slightly prior to the actual

designated index point.

•

If the disc has no encoded index points, play will begin from

the start of the selected track.

•

The index number can be designated only while the INDEX

number display is illuminated.

To stop program play

Press the STOP button. The first track number programmed

will be displayed.

To resume play, press the PLAY button. Play will begin from

the beginning of the program.

To cancel a programmed setting

There are several methods, as described below.

•

Press the STOP button while the unit is stopped.

•

Open the disc tray.

•

Switch off the power.

To check programmed data

1. If the unit is in the play mode, press the STOP button.

2. Press the PROG button.

3. Each time the SKIP button is pressed, the track

numbers and sequential order of the programmed tracks

can be checked one after another. The display of the

track number can be returned (sequentially in reverse

order) by pressing the SKIP button.

To correct programmed data

1. Follow the procedure described in “To check programmed

data”.

2 Display the track number to be corrected by pressing the

SKIP button.

3. Press a numeric button to select a track to replace the one

displayed. The previously programmed track will be

cleared from the memory and the new one will be

programmed.

4. After the correction has been completed, once again press

the PROG button or the PLAY button.

INDEX SEARCH

If the disc includes index numbers, play can be started from any desired index number.

PLAY

123

456

789

INDEX

SKIP

OPEN/

INDEX

1, 3

1 Stop the unit.

* The peak level searching function of this unit is useful for

adjusting recording level on the tape deck. (Refer to page

15.)

2 Enter the tape’s total possible recording time.

You can select any of four tape lengths by pressing the

TAPE button.

3 Otherwise, you can also enter the tape’s total possible

recording time manually.

Example: For a C-64 tape (32 minutes on each side)

* By pressing the REPEAT button, the unit automatically

programs tracks for side A and side B separately

considering the tape’s total time.

5 Begin recording on the tape deck and press the

PLAY button on this unit at the same time.

6 The unit will pause at the end of side A of the tape.

Turn the tape over to side B. Resume recording and, at

the same time, press the PLAY button or the PAUSE

button on this unit

Notes

• All tracks may not be programmed if the tape’s length is not

enough. To program all tracks, use a longer tape.

• In step 4, you can check the program data for side A and

sideB.

➀

Shows the number of programmed tracks.

➁

Shows the total time of programmed tracks.

➂

Shows the side of the tape.

➃

Shows the programmed track numbers.

TRACK PROGRAMMING FOR RECORDING TO TAPE

This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible

recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least

amount of unrecorded space remaining at each end of the tape. Additionally, this function will insert sufficient time space between

programmed tracks automatically so that the tape deck can perform blank search operations correctly.

Automatic tape-programming

This is for recording only the tracks which best fit onto a tape.

LOGODISK

STOP

TAPE

34 5 6 78

REPEAT

TAPE

(off)

5, 6

1 Follow steps 1 – 3 on page 12.

3 Select the track numbers (to be recorded on side A) in

the desired order.

* Programmed track numbers are illuminated on the

display. You can select a track which can be

programmed for the remaining time of (the side of) the

tape from track numbers flashing on the display, but you

cannot select any darkened track number.

4 Program the pause mode.

5 Select the track numbers (to be recorded on side B) in

the desired order.

6 Begin recording on the tape deck and press the PLAY

button on this unit at the same time.

7 The unit will pause at the end of side A of the tape.

Turn the tape over to side B. Resume recording and,

at the same time, press the PLAY button or the PAUSE

button on this unit.

Notes

• If, in step 3 or 5, “E : rr” appears in the display, the track

number just selected cannot be programmed because there

is not enough time remaining on the tape. However, at this

time, if any other track number is flashing continuously in the

display, you can program it instead of the unprogrammable

one.

• In step 3 or 5, each time a selection is made, the track

number and the tape’s remaining time will be displayed, and

then the display will change to indicate the number of the

next program.

Manual tape-programming

This is for recording desired tracks in any desired order onto a tape.

Notes on tape programming

•

To check, cancel or correct program data, refer to page 11.

* In checking the program data, note that “Pu” appears

between track numbers for side A and side B.

•

The maximum number of tracks that can be programmed is

25 (P-01 to P-25). If, however, the PAUSE mode is inserted,

it is counted as one track.

• This function can be used to program up to track number 24.

If the disc has more than 24 tracks, track number 25 and

thereafter will not be programmed.

LOGODISK

PROG

34 5 6 78

PAUSE

34 5 6 78

3, 5

4, 7

2 6, 7

1 Follow steps 1 – 3 on page 12.

* The unit will automatically program tracks for side A and

side B separately considering the tape’s total time.

3 Begin recording on the tape deck and press the PLAY

button on this unit at the same time.

4 The unit will pause at the end of side A of the tape.

Turn the tape over to side B. Resume recording and, at

the same time, press the PLAY button or the PAUSE

button on this unit.

Notes

•

Because the programmed data changes every time the

RANDOM button is pressed, the amount of time remaining

at the end of the tape also changes accordingly.

•

If the tape’s length is not enough, all tracks cannot be

programmed. In this case, exchange the tape for a longer

one.

•

In step 2, you can check the program data for side A and

side B.

➀

Shows the number of programmed tracks.

➁

Shows the total time of programmed tracks.

➂

Shows the side of the tape.

➃

Shows the programmed track numbers.

Random sequential tape-programming

The unit will automatically program tracks in random sequential order for recording to tape.

LOGODISK

RANDOM

3, 4

Automatic searching of the peak level on a disc

This convenient feature automatically searches the part on a disc where the source level peaks, and next plays the part repeatedly.

For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.

1 Stop the unit.

Searches the peak level through the disc.

Repeatedly plays the part where the source level peaks.

To cancel the peak level searching function

Press the STOP button. (However, some other buttons can

also be used to cancel this function.)

Notes

•

Even if the peak level searching is performed twice or more

on the same disc, the same part will not be always selected,

because this unit will search the peak level among parts on

the disc that are randomly selected by the internal

microcomputer.

•

This feature will also function in the program play mode. If

program play is being performed, first press the STOP

button, and then press the PEAK button. If program play is

not being performed, only press the PEAK button.

LOGODISK

STOP

PEAK

10 11 12

Battery installation

Battery replacement

If you find that the remote control transmitter must be used

closer to the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

•

Use only AA, R6, UM-3 batteries for replacement.

•

Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

•

Remove the batteries if the remote control transmitter will not

be used for an extended period of time.

•

If batteries leak, dispose of them immediately. Avoid

touching the leaked material or letting it come in contact with

clothing, etc. Clean the battery compartment thoroughly

before installing new batteries.

Remote control transmitter operation range

Notes

•

There should be no large obstacles between the remote

control transmitter and the main unit.

•

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter not to work

correctly. In this case, reposition the main unit to avoid direct

lighting.

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

NOTES ABOUT HANDLING COMPACT DISCS

•

This compact disc player is designed only for playing

compact discs bearing the mark. Never attempt to load

any other type of disc into the unit.

The unit will also play 3-inch (8-cm) compact discs.

•

To remove a disc from its storage case, open the case and

then press down at the center; with a finger through the

center hole and the outer edges held as shown in the

illustration, lift the disc out carefully.

•

Always handle the disc with care so that its surface is not

scratched.

•

Compact discs are not subjected to wear during play, but

damage to the disc surface when the disc is being handled

can adversely affect the disc’s play.

•

Compact discs are not affected by small particles of dust or

fingerprints on their playing surface, but even so they should

be kept clean. Wipe by using a clean, dry cloth. Do not

wipe with a circular motion; wipe straight outward from the

center.

•

Do not try to clean the disc’s surface by using any type of

disc cleaner, record spray, anti-static spray or liquid, or any

other chemical-based liquid, because such substances might

irreparably damage the disc’s surface.

•

Do not expose discs to direct sunlight, high temperature or

high humidity for a long period of time, because these might

warp or otherwise damage the disc.

To play a 3-inch (8-cm) CD

Place it in the inner recessed area of the disc tray. Do not put

a normal (5-inch/12-cm) CD on top of a 3-inch CD.

30°

NO!

Remote control

sensor

Within approximately

7 m (23 feet)

SYMPTOM

The player does not switch ON when the

POWER switch is pressed.

The disc tray does not close completely.

The DISC indicator does not illuminate.

Play does not begin.

Play is delayed, or begins at the wrong

place.

No sound.

Sound “skips”.

Sound “hums”.

Noise from a nearby tuner.

Noise from inside of the disc tray.

The remote control transmitter does not

work.

PROBABLE CAUSE

The power cord is not connected or not

completely connected.

A foreign object is obstructing the tray.

The disc has been loaded upside down.

The disc is damaged.

There is moisture on the laser pickup.

The disc has been loaded upside down.

The disc is dirty.

The disc may be scratched or damaged.

Improper output cable connections.

Improper amplifier operation.

The player is being subjected to vibrations or

impacts.

The disc is dirty.

Improper cable connections.

The tuner is too close to the player.

The disc may be warped.

Direct sunlight or lighting (of an inverter type

of flourescent lamp etc.) is striking the remote

control sensor of the main unit.

REMEDY

Securely connect the power cord.

Carefully check the disc tray and remove the

foreign object.

Load the disc correctly.

Check the disc carefully; replace it if

necessary.

Wait 20 to 30 minutes after switching the unit

ON before trying to play a disc.

Reload the disc with the label side up.

Clean the disc.

Check the disc carefully; replace it if

necessary.

Connect the cables properly. If the problem

persists, the cables may be defective.

Set the amplifier controls to the correct input

selection.

Relocate the player.

Clean the disc.

Securely connect the audio cables. If the

problem persists, the cables may be defective.

Move the tuner and player farther apart.

Replace the disc.

Change position of the main unit.

TROUBLESHOOTING

If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple

measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and

contact your authorized YAMAHA dealer or service center for help.

SPECIFICATIONS

AUDIO SECTION

Frequency response ..................... 10 Hz 1 20 kHz, 50.5 dB

De-emphasis equalization ........................................ 50.5 dB

Harmonic distortion + noise ......................... 0.003% (1 kHz)

S/N ratio ........................................................................ 108 dB

Dynamic range ............................................................... 98 dB

Wow & flutter ................................................... Unmeasurable

Output voltage................................................. 2.050.5V max.

Headphones output (–20 dB) ............ 200540 mV/150 ohms

GENERAL

Power requirements

U.S.A. and Canada models ................................. 120V, 60 Hz

Australia and U.K. models .................................. 240V, 50 Hz

Europe model ...................................................... 230V, 50 Hz

General model ........................... 110/120/220/240V, 50/60 Hz

Power consumption ........................................................ 20W

Dimensions (W x H x D) ........................... 435 x 96 x 267 mm

(17-1/8” x 3-3/4” x 10-1/2”)

Weight ....................................................... 3.8 kg (8 lbs. 6 oz.)

Accessories ................................................... Connection cord

Remote control transmitter

Batteries (size AA, R6, UM-3)

Please note that all specifications are subject to change

without notice.

VQ02270-0 Printed in Japan BWWR, BB

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Yamaha CDX-470, YHT-470 Руководство пользователя