Telefunken TF-LED24S85T2 Руководство пользователя

LED TV

Телевизор цветного

изображения c

жидкокристаллическим экраном

TF-LED24S85T2

Instruction manual

Руководство по

эксплуатации

Table of contents

Before you start

Utilization of the product

Important safeguards

Installation

Base installation

Wall mounting

Connection

Outdoor antenna connection

Other connections

Operation

Control elements

Front panel

Back panel

Remote controller

Changing the battery

General operations

Signal sources

Teletext operations

OSD operation

Channel setting

Picture setting

Sound setting

Time setting

Lock setting

Setup menu

Screen setting

USB operation

General playback information

Operations of file playback

Electronic programme guide (EPG)

General information

Troubleshooting

Causes of interference

Accessories

Specifications

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read

this manual carefully before connecting, operating and/or adjusting the product and keep

the manual for reference in the future.

Before you start

If you want to dispose of this product, do not mix it with general household waste. There

is a separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,

you will ensure that your disposed product undergoes the necessary treatment, recovery

and recycling and thus prevent potential negative effects on the environment and human

health.

Utilization of the product

Important safeguards

• Please unplug the power cord from the AC

outlet and contact a service center for repair

if following occurs: any obvious abnormality

appears in the unit, such as smoky, peculiar

smell or strange sound; liquid has been spilled or

other objects have fallen into the unit; no picture

or sound; cover or panel is broken; although you

have operated the unit following the operating

instructions, it still cannot work normally.

• This unit can be connected to a power

supply outlet without the third ground contact

as well as with a ground contact.

• Always disconnect the power cord and

antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;

also unplug the signal cables from the input

ports when the unit is unused for long periods

of time.

• When unplugging the plug, always hold the

wide slot, do not touch the metal part, and do

not destroy, twist, pull or roast the power cord.

• When connecting cables, make sure the

power is switched off.

• Please contact the service center

immediately if you found that the core is

showed in the air or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket

completely or it cannot be fastened even when

it was pushed in, otherwise, any accidents of

shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket

with numerous devices jointed on one power

socket or cable device. The wire of non-

designated capacity may cause the fire due to

the generation of heat.

• All instructions must be read and

understood well before you operate the unit.

Heed all warnings and follow all instructions.

• Please use the accessories provided

by the manufacturer. Using inadequate

accessories may result in accidents.

• Please adjust the product through the

panel buttons or the remote controller, do

not remove the cover or attempt to service

the product by yourself. Do not disassemble

back cover and do not make maintenance by

yourself to avoid the electric shock.

• Over-press the panel may destroy the

product.

• Do not place the product on an unstable

cart, stand surface, tripod, bracket, or table.

The product may fall, causing serious accidents

as well as the damage to the product.

• Please place the product on a flat surface

in a well-ventilated location. Keep it away from

the burning-light, direct sunlight, vibration,

high-temperature and humidity.

• Do not place any vase, potted plant, cup,

Before you start

medicine and any container with water on this

product. If the liquid is spilt, it may cause the

fire, electric shock or breakdown.

• Do not install it at the place on the strong

magnetic field or current field. It may cause

break down. This equipment may be observed

deterioration of the picture by electromagnetic

radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf

with wheels when installing this product. If it

moves or is tipped over, it may be damaged.

• Do not place any fire source such as

candlelight close to this product or place it on

this product. If it is tipped over or fallen down, it

may cause damage or fire.

• Do not place the unit into closed space

of TV for better ventilation; it can reduce the

product lifetime. Keep a space at least 10 cm

at above, left, and right of the TV.

• Please place all the signal cords behind of

rear panel.

• Do not overexert or touch the panel when

you convey the product. Do not transfer the

LED TV up or down display direction.

• Do not transport it with the power cord

or the connection cable connected. If you

move this product with the power cord or the

connection cable connected, damaged power

cord, connection cable or connection terminal

may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the

device, which is heavier than 18 kg. If you drop

or tip over the device, it may damage it.

• The temperature of the product’s body

becomes a little higher after a long period use.

This phenomenon indicates that heat exchange

in normal working mode, thus please do not

let children or anyone who is sensitive of

temperature to touch.

All images provided herein are schematic

drawings and may differ from real objects.

Installation

Base installation

Wall mounting

•Separate the stand from

the cabinet before wall mounting.

•For wall mounting the back cabinet of this

unit is equipped with 2 screw holes. Spread

distance between the holes is 100*100 mm.

A VESA wall-mount bracket should be used

for wall mounting (the bracket is not included

and should be acquired separately).

Manufacturer is not responsible for improper

mounting resulting in damage of the unit.

Wall or ceiling mounting implements

must be durable and sufficient enough to

support the weight of the unit.

Cover a flat stable surface with a soft cloth.

Place the TV unit facedown on the cloth. First

align the holes on the back panel and the

stands, then insert them into the slots.

Before you start

Connection

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω

impedance converter to plug in antenna input

terminal on the rear of the cabinet.

Other connections

• Connect the audio sources (Including

DVD, VCDR, CAMCORDER and PC) to the

proper Audio input jacks ‘L’ and ‘R’.

• Connect the video source to the Video

input using an RCA cable.

• Plug the power cable in the electric outlet,

making sure the current voltage is supported.

• When using the LED as a computer

screen, connect the PC to the VGA jack from

the monitor by the relevant cable (not included).

• This unit has PC audio in jack. Connect

this jack to PC main unit with related audio

cable in PC mode and adjust the volume to

what you want.

• If the video source has a HDMI output

jack, you can connect the signal to the monitor

by the HDMI cable (not included).

• Coaxial output is intended for transmitting

multi-channel sound to an external decoder

(e.g. in 5.1-CH format). Coaxial cable should

be used for connection.

• Connect your headphones or earphones

(not included) to the headphone socket of

this unit. When earphones are connected, the

sound output through the built-in speakers of

this unit is mute.

• PCMCIA slot is used for CI modules that

are obtained from your digital TV provider.

Operation

Control elements

Back panel

1. Power cable

2. Earphone socket

3. PC input (VGA)

4. Composite AV input

5. PC audio input

6. Antenna input

7. Coaxial output

8. HDMI input

9. USB port

10. PCMCIA slot

1234567

INPU T

VIDEO R

VGA

HDMI / ARC

Operation

General operations

• Press button on the unit or on the RC

to switch on the power. Press POWER button

again to switch the unit off and go the the

stand-by mode. To completely power off the unit

unplug the power cable from the outlet.

• Press VOL- button repeatedly to decrease

the volume; press VOL+ button repeatedly to

increase the volume.

• Press SLEEP button repeatedly to set the

sleep time.

• Press GUIDE to launch the Electronic

Program Guide (EPG) or for a fast reverse in

recording (PVR) or Media Player mode.

• Press SUBTITLE to show and set the

language of a current DTV channel.

• Press REC to begin recording of current

playback in PVR mode.

• Press button on the RC to select

from the present channel and the previously

displayed channel.

• Press ASPECT button repeatedly to select

a screen display size.

• Press MUTE button to cut off sound, press

this button again or adjust volume to resume

sound.

• Press TV/RADIO button to switch between

TV and radio modes when watching channels.

• Select the TV function mode. Press

CH-/CH+ buttons to select previous or next

channels; or press number buttons to enter a

channel number directly.

• Press P.MODE button repeatedly to cycle

through the available video picture modes.

• Press S.MODE button repeatedly to cycle

through the available sound modes.

• Press DISPLAY button to display the

preset TV channel play information.

• Press FREEZE button to freeze the

picture on or off.

• Press FAV/LIST button to show the

favourite channel list.

• Press MTS button in TV mode repeatedly

to switch between various Nicam sound modes

(can be unavailable for some channels).

Signal sources

Press SOURCE button, then press DOWN/

UP cursor buttons on the RC or CH+/CH-

buttons on the panel to select a source from

available source list: DTV - ATV - AV -

HDMI - VGA. Press ENTER button on the

RC to confirm.

TELETEXT operations (option)

• Select the TV source mode. Then press

CH-/CH+ buttons to select TV channel in order

to pick up the picture signal of Teletext.

• Press CH-/CH+ buttons to select the

previous page or the next page.

• Teletext button functions are as follows:

ON/OFF: Press TTX button to enter into

TEXT mode. Press this button again to return

to the channel you are watching.

HOLD: Press this button to stop the move

to the next page. Press this button again to

cancel operation.

SUB.PG: Press this button to select sub

page, and the sub-page symbol will appear in

the left top hand corner of the screen. Enter the

number of sub page and use numeric buttons

in the format 0001 for sub page 1. The teletext

will search for the sub page.

CANCEL: When a text page is selected,

it may take some time before it becomes

available; press this button to return to TV

mode. When the required page is found, its

number will be displayed at the top of the

screen; press this button to return to the

teletext mode and browse the page.

RED/GREEN/YELLOW/CYAN buttons:

Press these 4 color buttons to access directly

to corresponding color page displayed at the

lower parts of teletext screen.

INDEX: Press this button to go to the index

page.

SIZE: Press this button to enlarge the text

shown on the teletext screen, and one half of

page could be shown. Press this button again

to view the second half of this page. Press this

button third time to normal size text page view.

REVEAL: Press this button to reveal the

cancelled information. Press this button again

to cancel the information.

Operation

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press UP/DOWN cursor buttons on the

RC or CH+/- buttons on the panel to select

setting page.

3. Press the ENTER button on the RC or

VOL+ button on the panel to go to the

parameter list.

4. Press UP/DOWN cursor buttons on the

RC or CH+/- buttons on the panel to select a

parameter to adjust.

5. Press cursor buttons on the RC or VOL

+/-or CH+/- buttons on the panel to adjust the

selected parameter.

6. Press EXIT button to quit the menu.

Some menu items may be in grey color,

in this case they are not adjustable. Pictures

of OSD menu are for reference only; they may

differ from actual menu tabs.

Channel setting

•Auto Tuning: press ENTER to select

the country and tuner type for channels to

start automatic search and saving of available

ATV channels. After the search is finished,

the unit will skip to searching DTV channels,

Radio channels and Data. During the ATV

search, press MENU button to skip to DTV,

Radio and Data search.

•ATV Manual Tuning:

Current CH: select channel number.

Color System: select corresponding color

system.

Sound System: select corresponding sound

system.

•DTV Manual Tuning: Press LEFT/RIGHT

cursor buttons to select channel number. Press

ENTER button to start searching. If the

selected channel number is available, the

channel will be saved under the selected

number. Press MENU button to quit.

Fine-Tune: perform fine adjustment of the

current frequency.

Search: press LEFT/RIGHT buttons; the

unit will search for next available channel

downward or upward and save it under the

current number.

•Programme Edit: this item allows

you to sort TV programs according to your

preferences. Enter the program edit menu:

Delete: Select the channel you want to delete.

Press red button to delete the channel.

Move (not available for DTV channels with

LCN): Highlight the needed channel. Press

yellow button; select the position to put the

channel into. Press yellow button to confirm.

Skip: Highlight the needed channel. Press

blue button; now this channel will be skipped

when you select previous/next channels.

Fav: select a channel and press the FAV

button to add it to your list of favorite channels.

Press FAV again to remove the channel from

favorites.

•Signal Information: View the information

on the current signal.

•CI Information (only in DTV mode): This

function enables you to watch some encrypted

services (pay services). Please insert a CI card

into the PCMCIA slot according to the arrow on

the CI card.

• The function can only be gotten when

CI slot is available.

• It is possible for you to change CI

(Common Interface) menu screen and service

by consulting your dealer.

• Please do not insert or pull out the CI card

when power on. During initialization of the CI

card, please don’t operate the TV.

• Do not insert or pull out the CI card

frequently so as to avoid any damages of the

TV and the CI card.

CHANNEL

Auto Tuning

Signal Information

CI Information

ATV Manual Tuning

DTV Manual Tuning

Schedule List

Programme Edit

Operation

Picture setting

•Picture Mode: Dynamic/Standard/Mild/

Personal. When Personal mode is

selected, you can adjust contrast,

brightness, colour, tint (NTSC signal only)

and sharpness of the image.

•Colour Temperature: Cold/Normal/

Warm.

•Noise Reduction: Dynamic noise

reduction effect for reducing the video noise

level. Select the Off/Low/Middle/High/Default

mode.

Sound setting

SOUND

Sound Mode

Treble

Bass

Balance 0

Auto Volume Level Off

AD Switch Off

SPDIF Mode PCM

•HDMI Mode: adjust the picture settings

when HDMI is selected as a source signal.

•Balance: adjust the balance between the

left and the right speaker.

•SPDIF Mode: Select the digital audio

output mode: Auto/PCM/Off.

•Auto Volume Level: reduce the

difference between channel and program

volume automatically.

•AD Switch (in DTV mode): This is an

auxiliary audio function that provides an

additional audio track for visually challenged

persons. This function handles the Audio

Stream for the AD (Audio Description), when

it is sent along with the Main audio from

the broadcaster. Users can turn the Audio

Description On or Off and control the volume.

•Sound mode: Standard/Music/Movie/

Sports/Personal. When Personal mode is

selected, you can adjust treble and bass.

PICTURE

Picture Mode

Contrast

Brightness

Colour Temp Normal

Standard

Colour

Tint

Sharpness

Noise Reduction Middle

HDMI Mode Auto

Operation

Time setting

•Clock: You can display either the DTV

signal stream time or set the system time.

•Time Zone: select your time zone.

•Sleep Timer: select the period until

automatic switch-off of the unit.

•Auto Standby: select the period after

which the TV turns off automatically if no input

is given.

•OSD Timer: select the time during

which the OSD menu stays visible.

unauthorized operation of the TV set unless

entering a 4-digit password. When Lock

System is on and the system is locked, you

must input the system password at Auto

Tuning, Manual Tuning, Programme Edit or

Default. Press the right number buttons for the

password. The default password is

0000/8888.

After a password correction has been

confirmed, please remember it for entering

into the Parent Guide menu, all functions can

not be activated until the correct password is

entered.

•Set password: You can set your private

password. Press the number buttons on the

remote control to set the new password. When

the new password has been put in twice, the

setting is finished successfully. The TV will go

back to previous menu.

•Channel Lock (in TV/DTV mode): Press

Green button to lock the available channel you

want. Press Green button again to unlock it.

Lock setting

•System Lock: The feature can prevent

•Parental Guidance: set the access

to age-restricted content.

•Key Lock: lock and unlock the

buttons on the TV set.

TIME

Clock

Time Zone

Sleep Timer

Berlin GMT+1

Off

-- -- -- --

Auto Standby

OSD Timer

15 S LOCK

System Lock

Set Password

Channel Lock

Off

Parental Guidance

Off

Key Lock

Off

Hotel Mode

•Hotel Mode: when the Hotel Mode

is enabled, the main menu is blocked. You can

still control the volume as well as picture and

sound modes, but channel search is restricted.

Operation

•Language: select the language of

the on-screen display (OSD) menu.

Setup menu

•TT Language: select the language of

the Teletext.

•Audio Languages: select the language

of audio (available for some DTV channels).

•Subtitle Language: select subtitle language

(available for some DTV channels).

•Hearing Impared: When Hearing Impaired

is on, the screen will give some information to

people whose hearing is impaired. When Off,

the information will be hidden.

•PVR File System (in DTV mode):

Select Disc: select the storage used for PVR.

Time Shift Size: select the time for Time

Shift.

Format: format the USB.

Speed Check: display the speed of the

storage.

•Software update (USB): Update TV

software using a USB storage device.

•Reset: reset the

parameters to initial factory settings.

Screen setting (only in VGA mode)

•Screen Setting (only in PC mode):

Auto adjust: automatic setting of the

parameters.

Horizontal Offset: adjust horizontal position of

the image.

Vertical Offset: adjust vertical position of

the image.

Size: adjust the image frequency manually.

Phase: adjust the phase manually.

Position Reset: reset the screen adjustment

SCREEN

Auto Adjust

Position Reset

H-Offset

V-Offset

Phase

Size

SETUP

Language

TT Language

Audio Languages

Aspect Ratio 16:9

West

English

Subtitle Language

English

Hearing Impaired

Off

PVR File System

Blue Screen Off

First Time Installation

Reset

Software Update (USB)

HDMI CEC

•Blue Screen: enable or disable a

blue screen showing when the TV signal is

weak.

•First Time Installation: run the

initial setting procedure.

• HDMI CEC: switch the HDMI

Consumer Electronic Control feature on or off.

•Aspect Ratio: select the screen

aspect ratio or set it to auto.

Operation

USB operation

General playback information

• Insert a USB drive into the USB port.

Select Media source and press ENTER button.

The screen will show a USB playback window,

in which you can select Music, Photo and

Movie contents to play by pressing LEFT/

RIGHT cursor buttons and ENTER button.

• USB file systems supported: FAT16, FAT32,

NTFS. 2.0 USB version is supported; maximum

capacity 2 TB (NTFS). For correct and

satisfactory operation, licensed USB devices of

well-known brands should be used. Avoid using

USB devices of unknown brands. Playback of

some file formats cannot be supported.

• This unit supports playback of video files

with ASF, AVI, MKV, MPG extensions, with

video codecs WMV9, DIVX, H263, MPEG-4,

MPEGII, XVID and audio codecs WMA, MP3,

DD(AC3).

The above list of extensions and codecs

is for information only and is not a guarantee

that all files having the above extensions and

codecs should be read by this unit.

• Some AVI files cannot be played due to

their parameters and recording conditions.

Video files with AVI extension exceeding 2 GB

in size may be played partially.

According to the USB 1.1/2.0 Standard,

usage of a USB device with power current

consumption exceeding 500 mA is not

recommended without supplementary power

supply. Failure to use supplementary power for

connected USB drives with power consumption

exceeding this value as well as defective

USB drives may cause mechanical or thermal

changes of elements of this unit as well as

failure of internal elements of the USB port.

Such damages are not warranty cases.

Warning: usage of external USB drives

containing BIN files in the root directory may

cause malfunction of the unit or damage to the

software.

Operations of file playback

• Insert a USB into the USB port. Press the

SOURCE button or select USB source and

press ENTER button on the RC or VOL+/VOL-

button on the unit. The screen will show a USB

playback window, in which you can select

Music, Photo and Movie contents to play by

pressing LEFT/RIGHT cursor buttons and

ENTER button.

• In the content menu, press cursor buttons

to select folder, press ENTER button to enter it,

then press cursor buttons to select the file you

want to watch or to listen to. Press ENTER to

play the selected file.

• While playback, press ENTER button; the

bottom of the screen will show playback menu

in which you can select an operation by LEFT/

RIGHT cursor buttons or perform this operation

by pressing ENTER button.

• While playback, press button to pause

or resume playback. Press button to stop

playback.

• When playing music files you can press

/ buttons to fast reverse or forward. You can

press / buttons to select the desired files

manually in normal condition.

• When playing photo files, you can press

/ buttons to page up or page down the

file. Press LEFT/RIGHT cursor buttons to

rotate the image.

• Press EXIT button to stop playback and

return to the previous menu screen.

Operation

Electronic programme guide (EPG)

If you know the airing time of the current

programme you can access the EPG menu by

pressing the GUIDE button on the RC. The

menu displays the list of the current available

channels on the left, and the name of each

programme starting in scheduled time periods

on the right. Select the channel by pressing

UP/DOWN and the programme by pressing

LEFT/RIGHT. Follow the on-screen instructions

and use color buttons to navigate this menu.

PVR/Timeshift function

Insert a USB drive, the system will

automatically create a folder to store the files

recorded. Recording begins when REC button

is pressed, and it records all the time until

button is pressed or the memory is full.

PVR/Timeshift is a feature enabling you to

record an air program while you are away.

Press button to activate Time Shift while

recording. Press UP/DOWN cursor buttons to

zoom in/out the Timeshift menu. You can

operate referring to PVR/Timeshift menu on

the screen.

CI information

(only in DTV mode): This function enables

you to watch some encrypted services (pay

services). Please insert a CI card into the

PCMCIA slot according to the arrow on the CI

card.

• The function can only be available

when CI card is present.

• It is possible for you to change CI

(Common Interface) menu screen and service

by consulting your dealer.

• Please do not insert or pull out the CI card

when power on. During initialization of the CI

card, please don’t operate the TV.

• Do not insert or pull out the CI card

frequently so as to avoid any damages of the

TV and the CI card.

• If there is no picture and/or sound with the

CI+ CAM module inserted, please contact the

customer support of the service provider.

General Information

Troubleshooting

Below is a table describing simple measures that can help you eliminate most problems likely

to emerge when this unit is in use. If below measures do not help, turn to a service center or to the

nearest dealer.

Symptom Cause Solution

No picture, no

sound, and no

indicator light

The power cord is not plugged in.

Contrast, brightness, color and

volume are all in the minimum value

or TV is in mute mode.

Plug the power cord in.

Alter the value of contrast,

brightness, color and volume.

Picture and

sound with

abnormity

Contrast and color are set improperly.

Color system is set improperly.

Sound system is set improperly.

Set the value of Contrast and color

properly.

Set the sound system properly.

The picture in

VGA mode is

abnormal

The PC settings may be improper. Check and set the resolution

parameters of your PC.

Picture is spotted

or with snow

Signal source is low-grade or the

signal is in a lower quality.

Use the qualified signal cord.

Blue background No video signal or the signal cord is

improperly/not connected.

Connect the signal cord properly.

No sound No audio signal or the signal cord is

improperly/not connected.

Connect the audio signal cord

properly.

Set the sound system properly.

The RC does not

work

Batteries are improperly installed or

exhausted.

Make sure the positive and the

negative polarities are correct.

Reattach the battery lid.

Replace the batteries.

Causes of interference

Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.

Local radiation however, can create disturbances, which visibly affect your picture. Proper

installations, a good aerial are your best safeguards against these disturbances.

• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or

receiving short-wave radio equipment.

• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of

diathermy equipment from a nearby doctor’s surgery or hospital.

• SNOW: Weak TV signals from long distant stations result in an instead picture and give the

effect of falling snow. An antenna adjustment or antenna amplifier may be needed.

• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,

hills, aircraft, etc. is minimized by correct aerial positioning.

• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture

or make the picture roll.

General Information

Accessories

1 pc

2 pcs

1 pc

The LED panel is a high technology product with many thin film transistors that can

give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen

as a fixed point of blue, green, red, black or white, please note that this does not affect the

performance of your LED TV.

Warning: Specifications may be subject to change without notice for improvement.

1. LED TV

2. Remote controller

3. Stand

4. Instruction manual

23.6" (60 cm)

1366x768

16:9

178°, 178°

8.5 ms

PAL, SECAM

B/G, DK, I

2 x 3 W

100 analogue/1000 digital

899 pages

AC ~100-240 V; 50 Hz

551 x 328.4 x 70.3 mm

551 x 364.8 x 180.7 mm

2.4 kg

from 5 to 35 °C

from 45% to 75%

from 86 to 106 kPa

(650-800 mm Hg)

Size (diagonal)

Resolution

Aspect ratio

View angle: vertical, horizontal

Response time

Color system

Sound system

NICAM stereo

Composite AV RCA input

PC audio input

VGA input

HDMI input

Headphone jack

Coaxial digital output

DVB-T/DVB-T2/DVB-C signal reception

PCMCIA interface (CI, CI+)

Russian and English OSD

Progressive scan

Digital comb filter

Sleep timer

USB movie, audio and photo support

Quantity of channels

Telete xt

Electric shock protection class

Nominal voltage range:

Unit dimensions: without stand

with stand

Net weight

Operating conditions

Ambient temperature

Relative humidity

Atmospheric pressure

Specifications

Содержание

Уважаемый покупатель!

Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-

пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить

настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте

руководство для использования в будущем.

Содержание

Перед началом эксплуатации

Утилизация изделия

Меры предосторожности

Установка

Установка на подставку

Крепление на стену

Подключение

Подключение внешней антенны

Прочие подключения

Управление устройством

Элементы управления

Передняя панель

Задняя панель

Пульт дистанционного управления

Установка батареек

Общие операции

Источники сигнала

Операции с телетекстом

Экранное меню

Операции с USB

Общая информация

Воспроизведение файлов

Электронный телегид (EPG)

Общая информация

Руководство по устранению

неисправностей

Источники помех

Комплект поставки

Технические характеристики

Перед покупкой рекомендуется

провести проверку оборудования:

-на отсутствие механических

повреждений конструкции, внешнего

оформления и упаковки, на

функционирование, на сохранность

пломб, на соответствие комплекта

поставки данным раздела

"Комплектность". Проведение проверки

на функционирование является

обязанностью продавца;

-на наличие гарантийного талона

-на правильность простановки в

гарантийном талоне даты продажи и

штампа продавца.

Рекомендуется сохранять товарный

(кассовый) чек, руководство по

эксплуатации с гарантийным талоном

до конца гарантийного срока

эксплуатации.

Настройка каналов

Настройка изображения

Настройка экрана

Настройка звука

Настройка таймера

Настройка блокировки

Настройка параметров 28

Перед началом эксплуатации

Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с

обычным бытовым мусором. Существует отдельная система сбора использованных

электронных изделий в соответствии с законодательством, которая предполагает

соответствующее обращение, возврат и переработку.

Обращайтесь в органы местного управления за инструкциями по правильной

утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия с

соблюдением обязательных процедур по обработке, утилизации и вторичной пере-

работке и, таким образом, предотвратите потенциальное негативное воздействие на

окружающую среду и здоровье людей.

Утилизация изделия

Меры предосторожности

• Пожалуйста, извлеките шнур пита-

ния из розетки и свяжитесь с сервисной

службой в следующих случаях: если в

устройстве имеются явные неисправности,

например, из него идет дым, чувствуется

специфический запах или слышен неха-

рактерный звук; если внутрь устройства

попала жидкость или посторонние предме-

ты; если нет изображения или звука; если

поврежден корпус или панель; если Вы

пользуетесь устройством согласно инструк-

ции, но оно не работает должным образом.

• Данное изделие может подключаться

к розетке питания как без заземляющего

третьего контакта, так и с заземляющим

третьим контактом.

• Во избежание поражения электриче-

ским током защищайте шнур питания от

возможного нажатия на него или защемле-

ния, особенно рядом с разъемами.

• Не закрепляйте шнур питания метизами.

• Если Вы не пользуетесь устройством

длительное время или в случае грозы

обязательно отключайте шнур питания из

розетки, а также отключайте все сигналь-

ные кабели от входных разъемов.

• При отключении вилки из розетки всег-

да держитесь за утолщение на вилке, не

касайтесь металлических частей, не тяните

за шнур и не ломайте и не перегибайте его,

не ремонтируйте, не перекручивайте и не

нагревайте.

• При подсоединении и отсоединении

любых кабелей удостоверьтесь в том, что

телевизор отключен от сети электропита-

ния.

• Немедленно свяжитесь с сервисным

центром, в случае если имеются какие-либо

неисправности шнура питания, в нем оголи-

лись жилы или он поврежден.

• Замените сетевую розетку, если в

нее невозможно вставить вилку или вилка

плохо закрепляется в розетке. Иначе могут

возникнуть неисправности или произойти

несчастные случаи или возгорания.

• Не прикасайтесь к проводам мокрыми

руками.

• Запрещается использование розетки, в

которую подключено несколько устройств.

Перегрузка такой розетки может привести

к пожару.

• Место подключения вилки шнура

питания к сети 220 В должно оставаться

легкодоступным.

• Перед работой с устройством необ-

ходимо полностью прочитать и понять все

инструкции. Необходимо соблюдать все пред-

Перед началом эксплуатации

упреждения и следовать всем инструкциям,

приведенным в настоящем руководстве.

• Пожалуйста, используйте только реко-

мендованные производителем аксессуары.

Использование других аксессуаров может

привести к неисправностям.

• Пожалуйста, проводите все настройки

и регулировки только с помощью кнопок

на передней и боковой панелях или на

пульте дистанционного управления. Ни в

коем случае не снимайте заднюю панель

и не пытайтесь самостоятельно проводить

техническое обслуживание устройства,

так как существует опасность поражения

электрическим током, а также возможно

возникновение неисправностей.

• Не устанавливайте устройство на

непрочные или неровные поверхности,

тележки, стойки, треноги, кронштейны

или столы. Устройство может упасть, в

результате чего могут возникнуть неисправ-

ности или произойти несчастные случаи.

Используйте только те приспособления,

которые рекомендованы производителем

или продавцом.

• Пожалуйста, устанавливайте устрой-

ство на горизонтальной поверхности в ме-

стах с хорошей вентиляцией. Не допускайте

воздействия на устройство вибрации, пря-

мого солнечного света, высокой температу-

ры, а также попадания пыли и влаги.

• Не ставьте на устройство вазы, сосуды

с жидкостью. Попадание жидкости внутрь

аппарата может привести к пожару или по-

ломке устройства.

• Не устанавливайте устройство в зоне

магнитных волн. Это может привести к по-

ломке устройства. В зоне электромагнитно-

го излучения может наблюдаться искаже-

ние изображения.

• Не устанавливайте вблизи устройства

источники открытого огня, например, свечи.

В случае их падения устройство может быть

повреждено или может произойти возгора-

ние.

• Установка телевизора в замкнутое

пространство при эксплуатации может со-

кратить срок службы устройства; поэтому

необходимо обеспечить минимальную

дистанцию между LED-телевизором и

внутренними границами приспособления

под аппарат для нормальной вентиляции

(минимум по 10 см свободного простран-

ства со всех сторон).

• Располагайте кабели позади устрой-

ства. Не закрепляйте их метизами, не пере-

гибайте, не ремонтируйте и не нагревайте.

• При перемещении телевизора не

нажимайте и не касайтесь панели. Не пере-

носите телевизор в положении, при котором

экран направлен вверх или вниз.

• Не перемещайте устройство при под-

ключенном проводе питания или других

подключенных проводах. Повреждение про-

вода питания, подключенный провод или

подключенные устройства могут стать при-

чиной пожара, электрошока или поломки.

• Если устройство тяжелее 18 кг, его

должны перемещать не менее 2 человек.

При падении устройство может повредиться.

• Слишком сильное нажатие на панель

может повредить устройство.

• При длительном использовании может

немного повысится температура корпуса

устройства. Это явление свидетельствует о

теплоотдаче в нормальном рабочем режи-

ме. Однако не позволяйте детям и людям с

повышенной температурной чувствительно-

стью касаться устройства.

После транспортировки в холодную

погоду (ниже 5° С) рекомендуется не

включать телевизор в течение как

минимум трех часов: за это время он

нагреется до комнатной температуры, а

весь конденсат испарится.

Все иллюстрации, приведенные в на-

стоящем руководстве, являются схе-

матическими изображениями, которые

могут отличаться от реальных объектов.

Перед началом эксплуатации

Установка/Подключение

Установка

Установка на подставку Средства для монтажа аппаратуры на

стене или потолке должны быть доста-

точными для выполнения своей функ-

ции.

Рекомендуется только вертикальное

расположение устройства.

ВНИМАНИЕ - До включения

аппаратуры в электрическую сеть

необходимо ознакомиться с мерами

электрической и противопожарной

безопасности, приведенными в

разделе "Меры предосторожности"

настоящего Руководства по

эксплуатации.

Установка на подставку

Выберите ровную плоскую

горизонтальную поверхность, накройте

ее мягкой тканью и разместите на ней

корпус телевизора экраном вниз.

Присоедините подставки к основанию

корпуса, вставив их в соответствующие

пазы.

Крепление на стену

• Для крепления на стену на задней

панели телевизора имеются 2 отверстия под

винты. Расстояние между крепежными

отверстиями по горизонтали и вертикали

составляет 100*100 мм.

Для крепления следует использовать

настенный кронштейн стандарта VESA (в

комплект поставки не входит и приобретается

отдельно). Производитель не несет

ответственности за неправильно

выполненный монтаж, повлекший

повреждение телевизора.

Страница загружается...

Telefunken TF-LED24S85T2 Руководство пользователя

Похожие модели бренда

Модели других брендов