w
w
w
.apc.com
®
Muchas gracias por haber comprado el protector contra sobretensiones APC de la serie P1. Por
favor, complete y envíe por correo la tarjeta de registro de garantía, o complete el formulario de
registro de garantía en línea visitando www.apc.com.
Seguridad
• No instale este dispositivo durante una tormenta eléctrica.
• Únicamente para uso en interiores.
• No instale el protector contra sobretensiones en sitios calientes o excesivamente húmedos.
• No lo utilice con equipos de acuarios.
Instalación
1. Enchufe el protector contra sobretensiones únicamente en una toma con conexión de tierra.
2. Enchufe el cable de alimentación eléctrica de su ordenador o de cualquier otro equipo eléctrico en
la toma del protector contra sobretensiones
➊.
Nota: Antes de enchufar el equipo en el protector contra sobretensiones, compruebe que funcione
correctamente.
3. Para los modelos P1T-FR, P1T-IT, P1T-SP, P1T-GR y P1T-RS, conecte un cable telefónico modular
entre el conector telefónico de la pared y el conector telefónico del protector contra sobretensiones
➋ marcado con el icono . Conecte un segundo cable telefónico modular entre el conector
telefónico del protector contra sobretensiones
➌ marcado con el icono y el teléfono, módem o
máquina de fax.
Indicador de protección – En los modelos P1-FR, P1T-FR, P1-GR, P1T-GR, P1-SP, P1T-SP, P1-RS y
P1T-RS, el indicador de protección está marcado con la leyenda 220-240V~ 16 A MAX. En los
modelos P1-IT y P1T-IT, dicho indicador lleva la leyenda 220-240V~ 10 A MAX. Cuando la unidad
está enchufada a la red de suministro eléctrico, el indicador de protección (Protection Indicator)
➍ se
enciende para indicar que el protector contra sobretensiones está activo y protegiendo al equipo
conectado contra las sobretensiones eléctricas perjudiciales. Si el indicador no se enciende al
enchufar la unidad, significa que la unidad está averiada y no está en condiciones de proteger al
equipo conectado. En este caso, debe ser devuelta de acuerdo con las instrucciones suministradas por
el departamento de Asistencia Técnica de APC.
Muito obrigado por adquirir o protector contra picos de tensão da série P1 da APC. Por favor
preencha o registo de garantia e devolva-nos por correio ou active a sua garantia on-line em
www.apc.com/pt.
Segurança
• Não se deve fazer a instalação deste dispositivo durante trovoadas.
• Para a utilização exclusiva em ambientes internos.
• Não instale o protector contra picos de tensão num local quente ou excessivamente húmido.
• Não utilize com equipamentos de aquário.
Instalação
1. Ligue o protector contra picos de tensão apenas a uma tomada com ligação à terra.
2. Ligue o cabo de alimentação do seu computador e/ou de outros equipamentos eléctricos à tomada
do protector contra picos de tensão
➊.
Observação: verifique se o equipamento a ser protegido está a funcionar correctamente antes de
ligá-lo ao protector contra picos de tensão.
3. Nos modelos P1T-FR, P1T-IT, P1T-SP, P1T-GR e P1T-RS, ligue um cabo telefónico modular entre a
tomada telefónica e a tomada fêmea do protector contra picos de tensão
➋ com a indicação .
Ligue outro cabo telefónico modular entre a tomada fêmea do protector contra picos de tensão
➌
com a indicação e o telefone, modem ou aparelho de fax.
Indicador de protecção – o indicador de protecção dos modelos P1-FR, P1T-FR, P1-GR, P1T-GR,
P1-SP, P1T-SP, P1-RS e P1T-RS apresenta a indicação 220-240V~16 A MÁX. O indicador de
protecção dos modelos P1-IT e P1T-IT apresenta a indicação 220-240V~10 A MÁX. Quando a
unidade está ligada à tomada, o Indicador de Protecção (Protection Indicator)
➍ acende para
identificar que o protector contra picos de tensão está em funcionamento. Se o indicador não acender
quando a unidade estiver ligada à tomada, a unidade sofreu danos e não é capaz de proteger os seus
equipamentos. Deverá devolvê-la, como indicam as instruções fornecidas pelo Suporte Técnico da
APC.
Спасибо за то, что Вы решили приобрести Essential Surge Protector серии P1 производства
компании APC. Пожалуйста, заполните и отправьте нам по почте «Регистрационную
гарантийную карту» или заполните «Регистрационную гарантийную форму» в Интернет по
адресу: www.apc.com.
Меры предосторожности
• Не устанавливайте этот прибор во время грозы.
• Прибор предназначен для применения только в помещениях.
• Не устанавливайте прибор в помещениях с повышенной температурой и влажностью.
• Не используйте с аквариумным оборудованием.
Установка
1. Подключите сетевой фильтр для защиты от скачков напряжения к заземленной розетке.
2. Вставьте вилку шнура электропитания компьютера и (или) иного электрического прибора в
розетку сетевого фильтра
➊.
Примечание: Перед подключением к сетевому фильтру убедитесь, что подлежащий защите
прибор находится в исправном состоянии.
3. Если вы приобрели модель P1T-FR, P1T-IT, P1T-SP, P1T-GR или P1T-RS, подключите
телефонный шнур к настенной телефонной розетке и гнезду сетевого фильтра
➋ с
маркировкой . Другой телефонный шнур подсоедините к гнезду сетевого фильтра
➌ с
маркировкой и к телефону, модему или факсу.
Индикатор защиты – На индикаторах защиты моделей P1-FR, P1T-FR, P1-GR, P1T-GR, P1-
SP, P1-SP, P1-RS и P1T-RS стоит маркировка 220-240V~ 16 A MAX. На индикаторах защиты
моделей P1-IT и P1T-IT стоит маркировка 220-240V~ 10 A MAX. При включении прибора в
розетку загорается зеленая лампочка индикатора защиты
➍, которая показывает, что сетевой
фильтр готов к защите приборов от опасных скачков напряжения. Если при включении
прибора в розетку этот индикатор не горит, значит прибор поврежден и более не может
обеспечивать защиту Вашему оборудованию. В этом случае прибор необходимо вернуть
изготовителю в соответствии с инструкциями Службы технической поддержки компании APC
(APC Technical Support).
Estabilizador esencial
Modelos P1-FR, P1T-FR, P1-IT, P1-SP, P1T-IT,
P1T-SP, P1-GR, P1T-GR, P1-RS y P1T-RS
Especificaciones
Garantía limitada
APC garantiza sus productos contra defectos de materiales y mano de obra, en condiciones normales de uso
y servicio por parte del propietario original durante la vida útil del producto (en Alemania, corresponde a
30 años a partir de la fecha de compra del producto). Para las unidades compradas y/o utilizadas en países
que no formen parte de la Comunidad Europea, el periodo de garantía es de 5 años a partir de la fecha de
compra. De acuerdo con esta garantía, la obligación de APC se limita, a su absoluta discreción, a la
reparación o sustitución de todo producto defectuoso. Para obtener servicio técnico durante el período de
garantía, el usuario debe recibir un número de autorización para la devolución de mercancías (RMA), ya
sea de APC o de un Centro de Servicio Técnico de APC, junto con los gastos de transporte pagados con
anterioridad, una breve descripción del problema y el comprobante de compra con la fecha y el lugar de
compra. Esta garantía se aplica únicamente al comprador original.
Voltaje nominal de
funcionamiento
220-240 V ca, 16 A MÁX. (P1-FR/P1T-FR, P1-GR/P1T-GR,
P1-SP/P1T-SP,
P1-RS/P1T-RS) 220-240 V ca, 10 A MÁX. (P1-IT/P1T-IT)
Frecuencia de funcionamiento 50 a 60 Hz
Líneas telefónicas protegidas 1, con conectores RJ-11 (P1T-FR, P1T-IT, P1T-SP, P1T-GR, P1T-RS)
Temperatura de funcionamiento 0 a 40 °C
Humedad relativa de
funcionamiento
0 a 95%, sin condensación
➊
➍
P1-FR P1T-FR P1-IT P1T-IT
P1-GR/P1-SP
P1T-GR/P1T-SP P1-RS P1T-RS
➋
➌
➊
➍
➋
➌
➋
➌
➊
➊
➍
➍
➋
➌
Especificações
Garantia Limitada
A APC garante, para o proprietário original, e durante a vida útil do produto (na Alemanha, o período é de
30 anos a partir da data da aquisição do produto), que seus produtos não apresentam defeitos de materiais
ou mão-de-obra em condições normais de utilização e serviço. Para unidades adquiridas e/ou utilizadas em
países não pertencentes à União Européia, a garantia é de 5 anos a partir da data de aquisição. As
obrigações da APC por força desta garantia limitam-se à reparação ou à substituição, ao seu exclusivo
critério, de quaisquer produtos defeituosos sob tais condições. Para obter serviços fora da garantia, deve-se
obter um número de Autorização de Devolução de Material (RMA, ou Returned Material Authorization)
da APC ou de um Centro de Atendimento da APC, com os custos de transporte pré-pagos, e devem
acompanhar a unidade uma breve descrição do problema e o omprovativo da data e do local da compra. A
presente garantia aplica-se apenas ao comprador original.
Tensão nominal de
funcionamento
220-240 Vac, 16 A MÁX (P1-FR/P1T-FR, P1-GR/P1T-GR, P1-SP/P1T-SP,
P1-RS/P1T-RS) 220-240 Vac, 10 A MÁX (P1-IT/P1T-IT)
Frequência de funcionamento 50 - 60 Hz
Linhas telefónicas protegidas 1, com a utilização de conectores RJ-11 (P1T-FR, P1T-IT, P1T-SP, P1T-GR,
P1T-RS)
Temperatura de funcionamento 0 a 40 °C
Humidade relativa de
funcionamento
0 a 95%, sem condensação
Технические характеристики
Ограниченная гарантия
Компания APC гарантирует, что при правильном использовании и обслуживании первоначальным владельцем ее
продукция не будет иметь дефектов материалов и изготовления в течение срока службы продукции (для Германии
данный период составляет 30 лет с момента покупки). Для устройств, приобретенных и/или используемых в
странах, не входящих в ЕС, гарантийный период составляет 5 лет со дня приобретения. Обязанности компании
APC по настоящей гарантии ограничены ремонтом или, по выбору компании, заменой любых продуктов с
указанными дефектами. Для гарантийного обслуживания Вам необходимо получить у APC или в Центре
технического обслуживания APC номер «Разрешения на возврат материалов» (Returned Material Authorization или
RMA) с уплаченными заранее транспортными расходами и приложить краткое описание возникшей проблемы, а
также документы, подтверждающие дату и место покупки. Настоящая гарантия распространяется только на
первичных покупателей.
Номинальное рабочее напряжение 220-240 Вт, 16 A макс. (модели P1-FR/P1T-FR, P1-GR/P1T-GR, P1-SP/
P1TSP, P1-RS/P1T-RS) 220-240 Вт, 10 A макс. (модели P1-IT/P1T-IT)
Рабочая частота 50-60 Гц
Кол-во защищенных телефонных
линий
1, с использованием соединительных кабелей RJ-11 (P1T-FR, P1T-IT, P1T-
SP, P1T-GR, P1T-RS)
Рабочая температура 0 - 40 °C
Рабочий уровень относительной
(неконденсирующейся) влажности
0 - 95%
Соответствие стандартам техники
безопасности
P1-RS / P1T-RS: CE & GOST
w
w
w
.apc.com
®
Protetor Essencial contra Surtos
Modelos P1-FR, P1T-FR, P1-IT, P1-SP, P1T-IT,
P1T-SP, P1-GR, P1T-GR, P1-RS e P1T-RS
w
w
w
.apc.com
®
Базовое устройство защиты от
перепадов напряжения
Модели P1-FR, P1T-FR, P1-IT, P1-SP, P1T-IT,
P1T-SP, P1-GR, P1T-GR, P1-RS и P1T-RS
990-1911A
Entire contents copyright 2007 American Power Conversion Corporation. All rights reserved. Reproduction in whole or in part without
permission is prohibited.
APC, the APC logo, and Back-UPS are trademarks of American Power Conversion Corporation. All other trademarks, product names, and
corporate names are the property of their respective owners and are used for informational purposes only.
Date of product declaration
THIS POLICY IS NOT A WARRANTY. REFER TO APC LIMITED WARRANTY FOR INFORMATION CONCERNING THE WARRANTY FOR YOUR APC PRODUCT. THE LIMITATIONS AND
CONDITIONS CONTAINED IN THIS POICY DO NOT AFFECT THE TERMS OF THE WARRANTY.
"Equipment Protection Policy"
The policy is valid in all European Union state members. It is also valid in Norway, Switzerland, Iceland, and Liechtenstein. If your electronic equipment is damaged by power line transients on an AC
power line (230V – see Note below) while directly and properly connected to a standard APC product covered by the Equipment Protection Policy ("connected equipment"), and if all the remaining
conditions specified below are met, APC will, at APC’s sole option, during the period specified below only, replace the APC product and either a) pay for the repair of the connected equipment or b)
reimburse you for the fair market value, as determined by the then current price list of the Boston Computer Exchange (or equivalent), of the connected equipment, in an amount not to exceed the dollar
limits stated below, if APC determines that the damage was caused by the failure of the APC product to protect against power line transients and/or where applicable, telephone or CATV (Cable Television)
line transients. Power line transients that APC products have been designed to protect against, as recognized by industry standards, include spikes and surges on AC power lines. Protection from telephone
line transients applies only to APC products which offer modem or fax line protection, and in cases in which such protection is available, telephone service equipment must include a properly installed and
operating "primary protection" device at the service entrance (such devices are normally added during telephone installation) in order to be covered for telephone line transients. Protection of CATV
connected equipment from transients applies only to APC products which offer such protection, and in such cases, the CATV service must be properly grounded according to the codes set forth in the all
applicable national and local electrical and safety codes in order to be covered for CATV transients.
“Data Recovery Policy”
If data is lost from the hard drive in the protected computer due to a malfunction of a properly connected APC product, APC will, at its sole discretion, provide data recovery services from Ontrack
®
data
recovery labs. This warranty will be offered to customers to the extent commercially reasonable, as determined by APC at its sole discretion. Ontrack will make every commercially reasonable effort to
retrieve customer data, however, due to the nature of data loss, recovery is not guaranteed. The data recovery warranty is available on all APC products mentioned in the chart that follows with the
exception of APC's Basic Surge Protector models. Data recovery is limited to physical hard drives within protected computing equipment. Expressly excluded from this warranty are any type of external
storage devices.
APC reserves the right to determine whether the damage to the connected equipment is due to APC product failure by requesting that damaged equipment be sent to APC for inspection. This policy is in
excess of, and applies only to the extent necessary beyond, any coverage for the connected equipment provided by other sources, including, but not limited to, any manufacturer’s warranty, and any
extended warranty coverage.
Equipment Protection Policy Dollar and Period Limits:
For customers that meet the qualifications and conditions set forth in this policy, APC will provide reimbursements (cost of repair or fair market value) during the period limits and up to the dollar limit
stated as follows:
Product Amount Period
P1-FR, P1T-FR, P1-IT, P1T-IT, P1-SP, P1T-SP, P1-GR, and P1T-GR 35,000 GBP/50,000 Euros Lifetime
Note: "Lifetime" period is the life of the product while owned by the original purchaser ("you" or "purchaser"). Other period limitations are from the date of purchase.
Eligibility for coverage under the Equipment Protection Policy:
1. You must register the product by returning to APC the warranty card provided with the product within 10 days of purchase. All information must be filled in, and you should retain a copy for your
records.
2. All connected equipment must have a CE mark.
3. The APC product must be plugged into properly wired and grounded outlets; no extension cords, adapters, other ground wires, or electrical connections may be used, with the sole exception of other
standard APC 230V products. The installation must not include power protection products by any manufacturer other than APC. The installation must comply with all applicable local electrical and
safety codes.
4. Any claim under the Equipment Protection Policy must be made within 10 days of the day of alleged damage to the connected equipment.
5. The Equipment Protection Policy covers only those product models listed above and is valid in all Eurpean Union state members, as well as Norway, Switzerland, Iceland, and Liechtenstein.
What is not covered under the Equipment Protection Policy:
1. DAMAGE TO ELECTRONIC EQUIPMENT RESULTING FROM TRANSIENTS ON DATA LINES IS NOT COVERED.
2. Restoration of lost data and reinstallation of software are not covered.
3. This policy does not cover damage from a cause other than AC power line transients, except for damage due to telephone line or CATV transients, which is covered only if the APC product offers such
protection.
4. DAMAGE CAUSED BY FAILURE TO PROVIDE A SUITABLE INSTALLATION ENVIRONMENT FOR THE PRODUCT (INCLUDING, BUT NOT LIMITED TO, LACK OF A PROPER
SAFETY GROUND).
5. Damage caused by the use of the APC product for purposes other than those for which it was designed.
6. Damage caused by accidents, or disasters such as fire, flood, or wind.
7. Damage caused by abuse, misuse, alternation, modification, or negligence.
8. This policy is null and void if, in APC’s view, the APC product has been tampered with or altered in any way.
9. EXCEPT AS EXPRESSLY PROVIDED IN THIS POLICY, IN NO CASE SHALL APC BE LIABLE UNDER THE TERMS OF THIS POLICY FOR ANY DAMAGES WHAT SO EV ER ,
INCLUDING, BUT NOT LIMITED TO, DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR MULTIPLE DAMAGES ARISING OUT OF THE USE OF THE APC
PRODUCT OR DAMAGE TO THE CONNECTED EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON WHICH SUCH CLAIM IS BASED, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. SUCH DAMAGES INCLUDE BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE APC
PRODUCT OR THE CONNECTED EQUIPMENT OR ANY ASSOCIATED EQUIPMENT, LOSS OF SOFTWARE, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT,
FACILITIES OR SERVICES, DOWNTIME, THE CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY.
Submitting an Equipment Protection Policy Claim:
1. If all of the conditions for coverage are satisfied, call the APC customer service department (see list at the end of the document for respective phone numbers) and obtain an EPP RMA (Equipment
Protection Policy Returned Material Authorization) number. APC will forward you an Equipment Protection Policy claim form, which must be completed and filed within 30 days.
2. Mark the Equipment Protection Policy RMA number on the product you are returning.
3. Pack the APC product in its original packaging (or request packing materials from APC if the packaging has been discarded). Enclose the completed Equipment Policy claim form and a copy of your
sales receipt for the APC product in box.
4. Mark the EPP RMA number clearly on the outside of box.
5. Ship the product (one way shipping charges paid by you) to:
American Power Conversion, Technical Support, Ballybrit Business Park, Galway, Ireland
Tel. +353 91 702000.
6. APC will evaluate the product to determine its level of functionality, and will examine the product for evidence of damage from AC line transients (telephone line or CATV transients, if applicable). (A)
If APC’s evaluation provides no evidence of damage from power line transients (telephone line or CATV transients, if applicable), APC will send to the customer (i) a report summarizing the tests
performed and (ii) a rejection of claim notice. (B) If the APC product shows evidence of damage from power line transients (telephone line or CATV transients, if applicable), APC will request that all
connected equipment for which an Equipment Protection Policy claim has been submitted, be sent for evaluation to either APC or an authorized service center. If it is determined that the connected
equipment has been damaged from AC power line transients (telephone line or CATV transients, if applicable), APC will, in its discretion, either authorize you to have the equipment repaired or
reimburse you for the fair market value of the damaged equipment, up to the dollar limits stated above.
7. If you are authorized by APC to have the connected equipment repaired, the repair must be performed at a service center that is authorized by the manufacturer of the connected equipment. APC
reserves the right to contact the authorized service centre directly to discuss repair costs and damage to the connected equipment to determine if it was caused by AC power line transients (telephone
line or CATV transients, if applicable) and the right to request that the service centre forward the connected equipment or components to APC for inspection.
8. APC will, after determining that the damage was caused by the failure of the APC product to protect against AC power line transients (telephone line or CATV transients, if applicable), issue payment
to you, in its sole discretion, for either costs of repair of the fair market value of the connected equipment, up to the dollar limits stated above. APC reserves the right to require you to transfer title and
deliver the connected equipment to APC if it chooses to reimburse you for the fair market value of the connected equipment.
9. Unless modified in a writing signed by APC and you, the terms of this policy are understood to be the complete and exclusive agreement between the parties, superseding all prior agreements, oral and
written, and all other communications between the parties relating to the subject matter of this agreement. No employee of APC or any other party is authorized to make any representations beyond
those made in this agreement concerning the Equipment Protection Policy.
/