Yamaha EX7 Руководство пользователя

Menü

TONE GENERATOR/REALTIME CONTROL/EXTENDED SYNTHESIS

OWNER’S MANUAL

MUSIC SYNTHESIZER/REALTIME CONTROL/EXTENDED SYNTHESIS

OWNER’S MANUAL

PRODUCT SAFETY MARKINGS: Yamaha electronic

products may have either labels similar to the graphics shown

below or molded/stamped facsimiles of these graphics on the

enclosure. The explanation of these graphics appears on this

page. Please observe all cautions indicated on this page and

those indicated in the safety instruction section.

ENVIRONMENTAL ISSUES: Yamaha strives to produce

products that are both user safe and environmentally friendly.

We sincerely believe that our products and the production

methods used to produce them, meet these goals. In keeping

with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice: This product MAY contain a small non-

rechargable battery which (if applicable) is soldered in place.

The average life span of this type of battery is approximately

five years. When replacement becomes necessary, contact a

qualified service representative to perform the replacement.

Warning: Do not attempt to recharge, disassemble, or

incinerate this type of battery. Keep all batteries away from

children. Dispose of used batteries promptly and as regulated

by applicable laws. Note: In some areas, the servicer is

required by law to return the defective parts. However, you do

have the option of having the servicer dispose of these parts

for you.

Disposal Notice: Should this product become damaged

beyond repair, or for some reason its useful life is considered

to be at an end, please observe all local, state, and federal

regulations that relate to the disposal of products that contain

lead, batteries, plastics, etc.

NOTICE: Service charges incurred due to lack of knowledge

relating to how a function or effect works (when the unit is

operating as designed) are not covered by the manufacturer’s

warranty, and are therefore the owners responsibility. Please

study this manual carefully and consult your dealer before

requesting service.

NAME PLATE LOCATION: The graphic below indicates the

location of the name plate. The model number, serial number,

power requirements, etc., are located on this plate. You should

record the model number, serial number, and the date of

purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

CAUTION

EX5/EX7

EX5R

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within the equi-

lateral triangle is intended to alert the

user to the presence of important oper-

ating and maintenance (servicing)

instructions in the literature accompa-

nying the product.

The lightning flash with arrowhead

symbol, within the equilateral triangle,

is intended to alert the user to the pres-

ence of uninsulated “dangerous volt-

age” within the product’s enclosure

that may be of sufficient magnitude to

constitute a risk of electrical shock.

IMPORTANT NOTICE: All Yamaha electronic products are

tested and approved by an independent safety testing

laboratory in order that you may be sure that when it is

properly installed and used in its normal and customary

manner, all foreseeable risks have been eliminated. DO NOT

modify this unit or commission others to do so unless

specifically authorized by Yamaha. Product performance

and/or safety standards may be diminished. Claims filed under

the expressed warranty may be denied if the unit is/has been

modified. Implied warranties may also be affected.

SPECIFICATIONS SUBJECT TO CHANGE: The information

contained in this manual is believed to be correct at the time

of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to

update existing units.

SPECIAL MESSAGE SECTION

92-469- 1

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

FCC 5/21/98 3:03 PM Page 2

92-469- 3

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,

AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING- When using any electrical or electronic product,

basic precautions should always be followed. These

precautions include, but are not limited to, the following:

1. Read all Safety Instructions, Installation Instructions,

Special Message Section items, and any Assembly

Instructions found in this manual BEFORE making any

connections, including connection to the main supply.

2. Do not attempt to service this product beyond that

described in the user-maintenance instructions. All other

servicing should be referred to qualified service personnel.

3. Main Power Supply Verification: Yamaha products are

manufactured specifically for the supply voltage in the area

where they are to be sold. If you should move, or if any doubt

exists about the supply voltage in your area, please contact

your dealer for supply voltage verification and (if applicable)

instructions. The required supply voltage is printed on the

name plate. For name plate location, please refer to the

graphic found in the Special Message Section of this manual.

4. DANGER-Grounding Instructions: This product must be

grounded and therefore has been equipped with a three pin

attachment plug. If this product should malfunction, the ground

pin provides a path of low resistance for electrical current,

reducing the risk of electrical shock. If your wall socket will not

accommodate this type plug, contact an electrician to have

the outlet replaced in accordance with local electrical codes.

Do NOT modify the plug or change the plug to a different type!

5. WARNING: Do not place this product or any other

objects on the power cord or place it in a position where

anyone could walk on, trip over, or roll anything over power or

connecting cords of any kind. The use of an extension cord is

not recommended! If you must use an extension cord, the

minimum wire size for a 25' cord (or less) is 18 AWG. NOTE:

The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local

electrician.

6. Ventilation: Electronic products, unless specifically

designed for enclosed installations, should be placed in

locations that do not interfere with proper ventilation. If

instructions for enclosed installations are not provided, it must

be assumed that unobstructed ventilation is required.

7. Temperature considerations: Electronic products should

be installed in locations that do not seriously contribute to their

operating temperature. Placement of this product close to heat

sources such as; radiators, heat registers etc., should be

avoided.

8. This product was NOT designed for use in wet/damp

locations and should not be used near water or exposed to

rain. Examples of wet /damp locations are; near a swimming

pool, spa, tub, sink, or wet basement.

9. This product should be used only with the components

supplied or; a cart ,rack, or stand that is recommended by the

manufacturer. If a cart, rack, or stand is used, please observe

all safety markings and instructions that accompany the

accessory product.

10. The power supply cord (plug) should be disconnected

from the outlet when electronic products are to be left unused

for extended periods of time. Cords should also be

disconnected when there is a high probability of lightening

and/or electrical storm activity.

11. Care should be taken that objects do not fall and

liquids are not spilled into the enclosure through any openings

that may exist.

12. Electrical/electronic products should be serviced by a

qualified service person when:

a. The power supply cord has been damaged; or

b. Objects have fallen, been inserted, or liquids have

been spilled into the enclosure through openings; or

c. The product has been exposed to rain; or

d. The product does not operate, exhibits a marked

change in performance; or

e. The product has been dropped, or the enclosure of the

product has been damaged.

13. This product, either alone or in combination with an

amplifier and headphones or speaker/s, may be capable of

producing sound levels that could cause permanent hearing

loss. DO NOT operate for a long period of time at a high

volume level or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the ears, you should

consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

14. Some Yamaha products may have benches and/or

accessory mounting fixtures that are either supplied as a part

of the product or as optional accessories. Some of these items

are designed to be dealer assembled or installed. Please

make sure that benches are stable and any optional fixtures

(where applicable) are well secured BEFORE using. Benches

supplied by Yamaha are designed for seating only. No other

uses are recommended.

PLEASE KEEP THIS MANUAL

FCC 5/21/98 3:03 PM Page 3

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority, granted

by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or

another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a

reasonable level of assurance that your use of this product in a

residential environment will not result in harmful interference with

other electronic devices. This equipment generates/uses radio

frequencies and, if not installed and used according to the

instructions found in the users manual, may cause interference

harmful to the operation of other electronic devices. Compliance

with FCC regulations does not guarantee that interference will not

occur in all installations. If this product is found to be the source of

interference, which can be determined by turning the unit “OFF”

and “ON”, please try to eliminate the problem by using one of the

following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact

Yamaha Corporation of America, Electronic Service Division, 6600

Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

ADVARSEL!

Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskiftning

må kun ske med batteri af samme fabrikat og type. Levér det brugte

batteri tilbage til leverandoren.

VARNING

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp

eller en ekvivalent typ som rekommenderas av apparattillverkaren.

Kassera använt batteri enlight fabrikantens instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo

ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty

paristo valmistajan ohjeiden mukaisesti.

NEDERLAND

NETHERLAND

• Dit apparaat bevat een lithium batterij voor geheugen back-up.

• This apparatus contains a lithium battery for memory back-up.

• Raadpleeg uw leverancier over de verwijdering van de batterij op

het moment dat u het apparaat ann het einde van de levensduur

afdankt of de volgende Yamaha Service Afdeiing:

Yamaha Music Nederland Service Afdeiing

Kanaalweg 18-G, 3526 KL UTRECHT

Tel. 030-2828425

• For the removal of the battery at the moment of the disposal at the

end of the service life please consult your retailer or Yamaha

Service Center as follows:

Yamaha Music Nederland Service Center

Address : Kanaalweg 18-G, 3526 KL UTRECHT

Tel : 030-2828425

• Gooi de batterij niet weg, maar lever hem in als KCA.

• Do not throw away the battery. Instead, hand it in as small chemical

waste.

IMPORTANT NOTICE FOR THE UNITED

KINGDOM

Connecting the Plug and Cord

WARNING: THIS APPARATUS MUST BE EARTHED

IMPORTANT. The wires in this mains lead are coloured in

accordance with the following code:

GREEN-AND-YELLOW: EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying the

terminals in your plug proceed as follows:

The wire which is coloured GREEN-and-YELLOW must be

connected to the terminal in the plug which is marked by the

letter E or by the safety earth symbol or colored GREEN or

GREEN-and-YELLOW.

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

FCC INFORMATION (U.S.A.)

• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.

FCC 5/21/98 3:03 PM Page 4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,

short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• This instrument contains no user-serviceable parts. Do not attempt to

disassemble or modify the internal components in any way.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into

any openings.

• If the power cord or plug becomes frayed or damaged, or if there is a sudden

loss of sound during use of the instrument, or if any unusual smells or smoke

should appear to be caused by it, immediately turn off the power switch,

disconnect the electric plug from the outlet, and have the instrument

inspected by qualified Yamaha service personnel.

• Only use the voltage specified as correct for the instrument. The required

voltage is printed on the name plate of the instrument.

• Always connect the three-pin attachment plug to a properly grounded power

source. (For more information about the main power supply, see page 16.)

• Before cleaning the instrument, always remove the electric plug from the

outlet. Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which may

have accumulated on it.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy

objects on it, or place it in a position where anyone could walk on, trip over,

or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly cause

overheating in the outlet.

• Remove the electric plug from the outlet when the instrument is not to be used

for extended periods of time, or during electrical storms.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all

components, set all volume levels to minimum.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold

or heat (such as in direct sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disfiguration or damage to the internal

components.

• Do not use the instrument near other electrical products such as televisions,

radios, or speakers, since this might cause interference which can affect

proper operation of the other products.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint

thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

Also, do not place vinyl, plastic or rubber objects on the instrument, since

this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do

not use excessive force on the buttons, switches or connectors.

• Use only the stand/rack specified for the instrument. When attaching the stand

or rack, use the provided screws only. Failure to do so could cause damage to

the internal components or result in the instrument falling over.

• Do not operate the instrument for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing loss. If

you experience any hearing loss or ringing in the ears, consult a physician.

■ REPLACING THE BACKUP BATTERY

• This instrument contains a non rechargeable internal backup battery which

permits internal data to remain stored even when the power is off. When the

backup battery needs replacing, the message "Change internal battery!" will

display in the LCD. When this happens, immediately back up your data, then

have qualified Yamaha service personnel replace the backup battery.

• Do not attempt to replace the backup battery yourself, in order to prevent the

possible serious hazards. Always have qualified Yamaha service personnel

replace the backup battery.

• Never place the backup battery in a location that a child can reach, since a

child might accidentally swallow the battery. If this should happen, consult a

physician immediately.

■ SAVING USER DATA

• Always save data to a floppy disk frequently, in order to help prevent the loss

of important data due to a malfunction or user operating error.

Yamaha cannot be held responsible for damage caused by improper use or

modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

(2)AC-2

Intro/E/qx 5/21/98 11:26 AM Page 5

6

The Yamaha EX5 and EX7 Music Synthesizers, and the EX5R Tone Generator, offer more

music performance and production power than ever before available in a single keyboard or

tone generator unit. All three models feature a unique Extended Synthesis system which

incorporates a number of the most advanced tone generator technologies currently available

… plus a full-featured sampling system. There’s also a top-quality internal effect system so

no extra sound-processing equipment is required. 16-track song and 8-track pattern

sequencers provide sophisticated on-board sequence programming and editing capability,

while a unique 4-track arpeggiator function adds extended performance and

accompaniment capability. The EX-series keyboards and tone generator also offer one of the

most versatile and intuitive real-time control systems available, and they’re expandable to

suit a wide range of professional systems and requirements.

We urge you to read through at least the introductory section of this owner’s manual while

familiarizing yourself wit your EX5, EX5R, or EX7, and keep th manual in a safe place for

future reference.

About the Manual

This owner’s manual is divided into two main sections: The Introductory Section, and the Reference

Section:

■Introductory Section

This section has been designed to provide you with an overall understanding of the EX5, EX5R, and EX7, as

well as some hints as how to use these advanced instruments most effectively. It will also refer you to

corresponding sections in the Reference section, so you can refer to the pertinent details as necessary. Use the

Introductory Section as a guide and directory to the main features and functions of the EX5, EX5R, and EX7.

■Reference Section

The Reference Section contains full details and instructions for all of the EX features and functions. You

should be able to find the information you need via the table of contents, the index at the back of the manual,

or via the Introductory Section, described above.

(EX5/5R)

Products bearing the SONDIUS-XG logo are licensed under patents of Stanford University and Yamaha as listed

on the internet web site, <http://www.sondius-xg.com>.

This product is not compatible with the XG format or XG song data.

Included Accessories

Demonstration Disk 1-4

Owner’s Manual

Data List

AC Power Cord

Copying of the commercially available music sequence data and/or digital audio files is strictry prohibited except for your

personal use.

The illustrations and LCD screens as shown in this owner’s manual are for instructional purposes only, and may appear

somewhat different from those on your instrument.

The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their

respective companies.

Intro/E/qx 6/12/98 5:55 PM Page 6

7

Introductory Section

The Controls & Connectors ................................8

Setting Up ........................................................16

The Supplied Disks, Demos, & Factory Set Data

....25

EX System Overview ........................................28

Extended Synthesis ..........................................29

AWM Synthesis ....................................................29

Virtual Acoustic Synthesis (EX5/5R) ................30

AN Synthesis (Analog Physical Modeling)

............33

FDSP Synthesis

(Formulated Digital Signal Processing) ..............34

Voice and Performance Selection......................36

Voice Structure & Editing Hints ......................40

System Overview ..................................................40

Polyphony..............................................................45

Editing Control ....................................................45

Voice Store Procedure ..........................................48

The Power of the Performance Mode ..............49

Performance Store Procedure ..............................53

Performance Mode DSP Limitations ..................54

The Controllers ................................................55

The EX Controllers ..............................................55

Scene Switching & Morphing..............................57

Controller Sets ......................................................58

Sequencer Functions ........................................60

Sequencer Record Modes & Editing....................62

Play Effects & Groove Quantization ..................64

The EX Effect System ......................................65

Sampling ..........................................................69

The Key Map Mode ..........................................72

Reference Section

Voice Mode........................................................75

Voice Play Mode....................................................75

Voice Edit Mode....................................................76

Voice Job Mode ..................................................148

Wave Edit Mode..................................................150

Wave Job Mode ..................................................154

Performance Mode ..........................................156

Performance Play Mode ....................................156

Performance Edit Mode ....................................158

Performance Job Mode ......................................172

Sample Mode ..................................................175

Sample Play Mode ..............................................175

Sample Record Mode..........................................176

Sample Edit Mode ..............................................179

Sample Job Mode ................................................182

Song Mode ......................................................185

Song Play Mode ..................................................185

Song Record Mode..............................................193

Song Edit Mode ..................................................201

Song Job Mode....................................................206

Pattern Mode ..................................................219

Pattern Play Mode ..............................................219

Pattern Record Mode..........................................223

Pattern Edit Mode ..............................................226

Pattern Job Mode................................................227

Arpeggio Mode................................................238

Arpeggio Record Mode ......................................245

Arpeggio Edit Mode ..........................................247

Arpeggio Job Mode ............................................249

Disk Mode ......................................................259

Utility Mode....................................................270

Appendix ........................................................278

Optional Boards/Memories................................278

Troubleshooting..................................................291

LCD Messages ....................................................294

Specifications ......................................................295

Index....................................................................296

Contents

Introductory

Section

Reference

Section

Voice Mode

Performance

Mode

Sample Mode

Song Mode

Pattern Mode

Arpeggio

Mode

Disk Mode

Utility Mode

Appendix

Intro/E/qx 5/21/98 11:26 AM Page 7

SCENE

2

1

OCTAVE

DOWN UP

PITCH MODULATION 1 MODULATION 2

A D GAIN

VOLUME

MODE

EX5/7

1

OCTAVE [DOWN] and [UP] Keys (EX5 and EX7 only)

Shift the pitch of the keyboard up or down up to five octaves in

one-octave steps. The pitch is shifted one octave in the

corresponding direction, up to the maximum, each time one of

these keys is pressed. When the current octave is higher than

the normal octave the UP indicator will be lit, and vice versa.

Neither indicator will be lit when the normal octave is selected.

2

[PITCH] Wheel (EX5 and EX7 only)

This self-centering pitch wheel allows smooth upward and

downward pitch bends. A range of other control functions can

be assigned to the PITCH wheel.

➡

See page 55 for more information.

3

[MODULATION 1] and [MODULATION 2] Wheels

(EX5 and EX7 only)

Can be assigned to any of the extensive range of controller

parameters for extraordinary expressive control. The

MODULATION 2 wheel can also be used for “scene

morphing” — i.e. smoothly changing from one memorized

scene to the other.

➡

See page 55 for more information.

4

Ribbon Controller (EX5 and EX7 only)

Another expressive EX controller, the Ribbon Controller is

touch sensitive, and is controlled by running a finger lightly

across its surface to the left or right. The Ribbon Controller can

be assigned to the full range of EX parameters.

➡

See page 56 for more information.

9

Floppy Disk Drive

The built-in floppy disk drive allows easy, economical, high-

volume storage of voice data. The disk-in-use LED indicator

below the drive slot lights while any disk operation is in

progress (NEVER attempt to remove a disk or turn the power

off while a disk operation is in progress). The eject key, also

below the disk slot, is used to remove disks from the drive.

➡

See page 259 for more information.

8

Introductory

Section

Introductory Section

The Controls & Connectors

The following brief descriptions of the EX controls and connectors should help you to understand the

overall logic of the interface.

Front Panel

Intro/E/qx 5/21/98 11:27 AM Page 8

9

Introductory

Section

123456

POWER

EXIT

SHIFT

TONE GENERATOR

REALTIME CONTROL

EXTENDED SYNTHESIS

1 2 3 4 5 6

VOICE PERFORM SONG PATTERN SA MPLE

JOB

LMONO R

BREATH PHONES

VOLUME

AD

INPUT

A D GAIN

STORE UTILIT Y

DISK

SC2

SC1

EDIT

COMPARE

KEYMAP BYPASS

ARPEG KNOB

CANCEL

CURSOR

DATA

TOP

REC STOP PLAY

POWER

REW FWD

ON OFF

DEC NO INC YES

SPACE

ABC

0

123

456

789

ENTER

DEF GHI JKL

MNO

PQR

STU

VWX YZ

F1 F2 F3 F4 F5 F6 F7 F8 EXIT

SHIFT

E

VOICE

PERFORMANCE

SONG

PAT TERN SAMPLE

EDIT

JOB STORE UTILITY DISK

FWDREWTOP

KNOB MODE

ARPEGGIO

COMPARE

KEYMAP EF BYPASS REC STOP PLAY

8

Keyboard (EX5 and EX7 only)

The EX5 has a 76-key keyboard while the EX7 has a 61-key keyboard. Both are velocity and

after-touch sensitive for broad, intimate expressive control.

6

A/D Gain Control

Adjusts the input level of the INPUT R and L/MONO jacks (the INPUT jack on the EX7), and

therefore the level of the signal appearing at the input of the A/D (Analog-to-Digital) converter.

This control is important for setting optimum record level when recording samples in the

SAMPLE mode.

➡

See page 70 for more information.

5

SCENE [1] and [2] Keys ([SC1] and [SC2] on the EX5R)

The SCENE [1] and [2] keys can be used to memorize and recall different settings of the

Controller Knobs, so a complete set of knob settings can be recalled instantaneously. Knob

scenes are stored by using the SCENE keys in conjunction with the STORE key (page 57).

When both SCENE indicators are lit (this is done by pressing one SCENE key while holding the

other), the MODULATION 2 wheel or a foot controller can be used to “morph” between the

two scenes stored in the SCENE [1] and [2] keys (page 57).

7

VOLUME Control

Adjusts the volume of the sound delivered via the rear-panel OUTPUT L/MONO and R jacks

as well as the PHONES jack.

EX5R

76

9 5

* 1, 2, 3, 4 and 8 are not available on EX5R.

Intro/E/qx 5/21/98 11:27 AM Page 9

10

Introductory

Section

MODE

VOICE

PERFORMANCE

SONG

PAT TERN SAMPLE

EDIT

JOB STORE UTILITY DISK

FWDREWTOP

KNOB MODE

ARPEGGIO

COMPARE

KEYMAP EF BYPASS REC STOP PLAY

F1 F2 F3 F4 F5 F6 F7 F8

1 2 3 4 5 6

CANCEL

CURSOR

DATA

DEC NO

INC

YES

EXIT

SHIFT

EX5/7

% MODE Keys

The MODE keys select the corresponding

EX modes, or appropriate sub-modes. The

upper row of MODE keys engage the

primary modes, and have LED indicators

to show which mode(s) are currently

active. The lower row of MODE keys

select secondary or utility modes.

You can not enter Pattern mode when

[ARPEGGIO] key or [KEYMAP] key is turned on.

! [ARPEGGIO] Key

([ARPEG] on the EX5R)

This key turns the advanced automatic

arpeggiator on or off. When the

arpeggiator is turned on, the Voice or

Performance Edit mode Arpeggiator edit

display will appear.

➡

See page 238 for more information.

[ARPEGGIO] key functions (can be turned on or

off) when in Voice mode, Performance mode and

Song Play mode.

@ [KEY MAP] Key

Engages the Key Map mode in which

samples, entire patterns, or pattern

tracks can be individually assigned to

separate keys on the keyboard.

➡

See page 72 for more information.

[KEYMAP] key functions (can be turned on or

off) when in Voice mode, Performance mode

and Song mode.

# [EF BYPASS] Key

([BYPASS] on the EX5R)

Turns the type of effects specified in the

Utility mode Other Setup display on or

off. When engaged (i.e. when the

indicator is lit) the specified effects are

bypassed.

➡

See page 276 for more information.

$ Sequencer Keys

The sequencer keys control recording and playback in the Song, Pattern, and Arpeggio modes, and allow you to

locate a specific measure within a song or pattern. Their layout and functions are similar to the transport controls

on a tape recorder.

) [KNOB MODE] Key

([KNOB] on the EX5R)

The six Controller Knobs, described

below, can function either as sound

controllers or data entry knobs. In the

Song, Pattern, Sample, Edit, Job, Store,

Utility and Disk modes the [KNOB

MODE] key switches between data entry

and sound control, allowing you to try out

the effect of knob-related settings without

having to exit from the Edit mode. The

knobs function only as sound controllers

in the Voice and Performance modes.

[

I

]

REC

[

J

]

STOP

[

F

]

START

[ ]

TOP

[

G

]

REW

[

H

]

FWD

Press this key to engage the record ready mode. You have to press the

START key to actually start recording.

Press to stop recording or playback.

Press to start recording or playback.

This key takes you directly to the first measure (the “top”) of the current song

or pattern.

Press briefly to move back one measure, or hold for continuous scrolling.

Press briefly to move forward one measure, or hold for continuous scrolling.

Intro/E/qx 5/21/98 11:27 AM Page 10

11

Introductory

Section

TONE GENERATOR

REALTIME CONTROL

EXTENDED SYNTHESIS

1 2 3 4 5 6

VOICE PERFORM SONG PATTERN SA MPLE

JOB

LMONO R

BREATH PHONES

VOLUME

AD

INPUT

A D GAIN

STORE UTILIT Y

DISK

SC2

SC1

EDIT

COMPARE

KEYMAP BYPASS

ARPEG KNOB

CANCEL

CURSOR

DATA

TOP

REC STOP PLAY

POWER

REW FWD

ON OFF

DEC NO INC YES

SPACE

ABC

0

123

456

789

ENTER

DEF GHI JKL

MNO

PQR

STU

VWX YZ

F1 F2 F3 F4 F5 F6 F7 F8 EXIT

SHIFT

ES

ABC

0

12

45

7

8

DEF GHI

MNO PQR

VWX YZ

& [F1] through [F8] Function, [SHIFT], and [EXIT] Keys

The functions of these keys depend on the selected mode. They are used to engage a function indicated on the

display immediately above the key or select a page of parameters.

When the “S” symbol appears in the lower left corner of the display, the [SHIFT] key can be used to select a

secondary function menu for the function keys: press the appropriate function key while holding the [SHIFT]

key to access a secondary function.

The [EXIT] key will return you to the next highest level in the display hierarchy when in an editing, utility, or

disk function display. In most cases you can return directly to the top-level primary mode display by directly

pressing the appropriate MODE key.

^ LCD Display Screen & Contrast Control

This large multi-function liquid crystal display screen shows all parameters and prompts you need to operate the

EX5, EX5R, or EX7 with optimum ease and efficiency.

Use the contrast control to achieve the best display visibility (LCD visibility varies greatly with viewing angle and

lighting).

* Controller Knobs

These knobs form an important part of the advanced EX user interface. They can can be assigned to control an

impressively wide range of sound parameters in real time during performance/playback, and they can function as

data entry controls in the editing, utility, disk, and some other modes. The [KNOB MODE] key, described above,

determines which function the knobs assume in the appropriate modes.

Normally when you rotate a controller knob being used for data entry, the corresponding value changes in

relative fashion — i.e. the knob increases or decreases the value of the parameter in relation to the value that was

initially on the display. If you rotate a controller knob while holding the [KNOB MODE] key, however, the

relationship between the controller position and the data value becomes absolute, and the central detented

position of the knob will correspond to the exact center of the parameter range.

The Voice mode lets you select, play, and edit individual voices.

The [VOICE] key indicator also blinks to indicate that a MIDI System

Exclusive message is being received. [→ page 75]

In the Performance mode you can select, play, and edit individual

“performance” programs including multiple layered or split voices and effects.

Press the [VOICE] key while holding the [PERFORMANCE] key to go

directly to the Voice Edit mode from the Performance mode.

The [PERFORMANCE] key indicator also blinks to indicate that a MIDI

System Exclusive message is being received. [→ page 156]

The Song mode provides access to the sophisticated sequence recording,

playback, and editing capabilities provided by the EX5, EX5R, and EX7.

[→ page 185]

Sequence “patterns” which can be used individually or incorporated into

complete songs in the Song mode can be recorded, played, and edited in

the Pattern mode. [→ page 219]

Advanced sample recording and editing features are available via the Sample

mode. [→ page 175]

The [EDIT] key accesses the appropriate editing functions for the currently

selected mode: Voice, Performance, Song, Pattern, or Sample.

Each of the primary modes — Voice, Performance, Song, Pattern, and

Sample — have a range of “jobs” which can be accessed by pressing the

[JOB] key.

This key is used to store edited data to an internal memory location, or

controller knob settings to either of the SCENE keys. [→ pages, 48, 53 and 57]

The UTILITY mode includes MIDI, system and other functions that are

essential for general operation. [→ page 270]

The Disk mode includes disk save and load functions as well as all other

functions you need for efficient data storage and management. [→ page 259]

!@ #) * $

&

%

^

EX5R

[VOICE]

[PERFORMANCE]

[SONG]

[PATTERN]

[SAMPLE]

[EDIT]

[JOB]

[STORE]

[UTILITY]

[DISK]

Intro/E/qx 5/21/98 11:27 AM Page 11

12

Introductory

Section

CURSOR

DATA

DEC NO

INC

YES

BANK

PROGRAM

PA RT

TRACK

ELEMENT SELECT ELEMENT ON OFF

COMMON OSC PITCH FILTER AMPLITUDE LFO CONTROL EFFECT

ABCDEFGH

12345678

12341234

910111213141516

SPACE

ABC

0

123

456

7

89

ENTER

DEF GHI JK L

MNO PQR

STU

VWX YZ

CANCEL

6

ELEMENT SELECT ELEMENT ON OFF

COMMON OSC PITCH FILTER AMPLITUDE LFO CONTROL EFFECT

ABCDEFGH

12345678

12341234

910111213141516

XIT

0

123

456

789

EX5/7

¡ [DEC/NO] and [INC/YES] Keys

Used to select voices and edit

parameter values in any of the EX

edit modes. Either key can be pressed

briefly for single stepping in the

specified direction, or held for

continuous scrolling. These keys are

also used to respond “Yes” or “No”

to confirmation prompts when

executing certain operations or

saving/loading data.

º [CANCEL] Key

The [CANCEL] key can be used to

cancel an entered value and return to

the previous value if pressed before a

different parameter is selected.

( Data Dial and

[CURSOR/DATA] Key

The Data Dial provides a fast, efficient way to

cover a broad range of voice numbers when,

for example, you’re looking for a voice but

don’t know the number. It's also handy for

making large value changes in any of the

editing and utility modes.

When editing the Data Dial will normally

increment or decrement the selected

parameter value. When the [CURSOR/DATA]

key is pressed and its indicator is lit, however,

the Data Dial moves the cursor around the

display rather than changing values. This can

be handy when navigating a complex display

which includes many individual parameters.

™ Cursor Keys

These 4 keys move the "cursor" around the display screen, highlighting the various

items that are available for selection or parameters that are available for editing (the

cursor appears as a dark block with inverse characters).

Intro/E/qx 5/21/98 11:27 AM Page 12

13

Introductory

Section

TONE GENERATOR

REALTIME CONTROL

EXTENDED SYNTHESIS

1 2 3 4 5 6

VOICE PERFORM SONG PATTERN SA MPLE

JOB

LMONO R

BREATH PHONES

VOLUME

AD

INPUT

A D GAIN

STORE UTILIT Y

DISK

SC2

SC1

EDIT

COMPARE

KEYMAP BYPASS

ARPEG KNOB

CANCEL

CURSOR

DATA

TOP

REC STOP PLAY

POWER

REW FWD

ON OFF

DEC NO INC YES

SPACE

ABC

0

123

456

789

ENTER

DEF GHI JKL

MNO

PQR

STU

VWX YZ

F1 F2 F3 F4 F5 F6 F7 F8 EXIT

SHIFT

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

£ Numeric Keypad and [ENTER] Key

These keys allow direct entry of numeric values where applicable. Enter the required value

via the numeric keys — the entered number will flash on the displays — then press the

[ENTER] key to actually enter the specified value. The [ENTER] key is also used to enter

notes and other events when editing sequence data, and to execute a specified job or disk

function. The numeric keys are also used to specify note lengths and dynamics (velocity)

when step recording in the SONG or PATTERN mode.

➡

See page 199 for more information.

¢ Bank [A] Through [H] Keys (EX5 and EX7 only)

Each of the EX5 and EX7 voice memories — P1 (Preset 1), P2 (Preset 2), I1 (Internal 1)

and I2 (Internal 2) — has 128 voice memory locations arranged in 8 banks of 16 voices

each. The 128 performance memories are also organized in 8 banks of 16 performance

setups. These keys select the bank from which an individual voice or performance setup

will be selected. When editing voice parameters they are also used to select and mute

elements.

∞ Program Number [1] Through [16] Keys (EX5 and EX7 only)

The program number keys are used in conjunction with the bank keys to select any of the

128 voice memory locations within the currently selected voice memory — P1 (Preset 1), P2

(Preset 2), I1 (Internal 1) and I2 (Internal 2) — in the VOICE mode, or any of the 128

performance memory locations in the Performance mode. In the Voice Edit mode keys [1]

through [8] can be used to directly select the various edit displays.

™ ¡£

(º

EX5R

* ¢ and ∞ are not available on EX5R.

Intro/E/qx 5/21/98 11:27 AM Page 13

14

Introductory

Section

CAUTION

ATTENTION

WARNING

:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK,DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

POWER

ON

OFF

AC INLET

INDIVIDUAL OUTPUT

A/D

INPUT

6543

OUTPUT

R L MONO

FOOT

SWITCH

FOOT

CONTROLLER

FOOT

VOLUME

SUSTAIN

DIGITAL OUTPUT WORD CLOCK IN

AES EBU

SCSI

MIDI A

OUTTHRU IN

BREATH PHONES

CAUTION

ATTENTION

WARNING

:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK,DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

POWER

ON

OFF

AC INLET

EX5

EX7

ª

A/D INPUT L/MONO and

R Jacks (A/D INPUT on the EX7)

Line and microphone sampling

sources can be connected to these

jacks. Line or microphone input

sensitivity is switched via the

“line/mic” parameter in the Sample

mode REC display (page 176), and

fine input sensitivity adjustment

can be carried out via the A/D

GAIN control on the control panel.

➡

See page 70 for more

information.

•

INDIVIDUAL OUTPUT 1 and

2 Jacks (EX5 and EX5R only)

In addition to the stereo OUTPUT

L/MONO and R jacks, the EX5 and EX5R

initially have two individual outputs: the

INDIVIDUAL OUTPUT 1 and 2 jacks.

Individual “parts” of a performance setup

can be assigned to different individual

outputs via the PERFORMANCE EDIT

mode PART display (see page 164). Four

individual outputs can be added to the

EX5, EX5R, and EX7 by installing the

optional EXIDO1 Individual Output

Board (page 19.)

§

[POWER] Switch

Press to turn power ON

or OFF. The EX5 and

EX7 power switch is

located on the rear panel

near the AC power cord

socket. The EX5R power

switch is located on the

front panel.

‚

MIDI IN, OUT and THRU Connectors

The MIDI IN connectors receive data from an external sequencer or

other MIDI device which is to control or transmit data to the EX. The

MIDI THRU connector simply re-transmits the data received at the MIDI

IN connector, allowing convenient chaining of MIDI devices. The MIDI

OUT connectors transmit data corresponding to all EX performance and

playback operations.

The EX5 is equipped with two sets of MIDI terminals: MIDI A and MIDI

B. The MIDI A group includes MIDI IN, OUT, and THRU terminals,

while the MIDI B group only has MIDI IN and OUT terminals.

➡

See page 22 for more information.

¶

AC Power Cord Socket

Be sure the plug the AC power cord

into this socket before plugging the

power cord into an AC outlet.

Use only the AC power cord

supplied with the EX5, EX5R, or

EX7. If the supplied cord is lost or

damaged ands needs to be replaced,

contact your Yamaha dealer. The

use of an inappropriate replacement

can pose a fire and shock hazard!

§ ¶

‚

ﬁﬂ

›‡‹¤⁄ª

* • is not available on EX7.

Rear Panel

Intro/E/qx 5/21/98 11:27 AM Page 14

15

Introductory

Section

AC INLET

CAUTION

ATTENTION

WARNING

RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

MIDI

OUTTHRU IN

INDIVIDUAL OUTPUT

65 43

DIGITAL OUTPUT

WORD CLOCK IN

AES EBU

INDIVIDUAL OUTPUT

21

OUTPUT

R

L MONO

VOICE PERFORM SONG PATTERN SA MPLE

JOB

LMONO R

BREATH PHONES

VOLUME

AD

INPUT

A D GAIN

STORE UTILIT Y

DISK

SC2

SC1

EDIT

COMPARE

KEYMAP BYPASS

ARPEG KNOB

CURSOR

DATA

TOP

REC STOP PLAY

POWER

REW F WD

ON OFF

DEC NO INC YES

SPACE

ABC

0

123

456

789

ENTER

DEF GHI JKL

MNO

PQR

STU

VWX YZ

INDIVIDUAL OUTPUT

A/D

INPUT

6543 21

R L MONO

OUTPUT

R L MONO

FOOT

SWITCH

FOOT

CONTROLLER

FOOT

VOLUME

SUSTAIN

DIGITAL OUTPUT WORD CLOCK IN

AES EBU

SCSI

MIDI B MIDI A

OUT IN OUTTHRU IN

BREATH PHONES

EX5R

Front

Rear

⁄

FOOT SWITCH

Jack

(EX5 and EX7 only)

An optional Yamaha

FC4 or FC5 footswitch

can be connected to

this jack to control of a

range of on/off type

functions: sustain,

sotenuto, portamento,

and others.

➡

See page 17 for more

information.

¤

SUSTAIN Jack

(EX5 and EX7

only)

An optional

Yamaha FC4 or

FC5 footswitch

can be connected

here for sustain

control.

‹

FOOT

CONTROLLER

Jack

(EX5 and EX7 only)

This jack accepts a

Yamaha FC7 Foot

Controller which can

be used to control any

of the EX controller

parameters.

➡

See page 17 for

more information.

›

FOOT VOLUME

Jack

(EX5 and EX7 only)

A Yamaha FC7 Foot

Controller can be

plugged in here for

convenient foot

volume or expression

control.

‡

OUTPUT L/MONO and R Jacks

These are the main stereo outputs from

the EX5, EX5R, and EX7. Be sure to

connect both outputs to the appropriate

channels of a stereo sound system in order

to appreciate the full quality of the EX

sound and effects. Connect only the

L/MONO jack when connecting to a mono

sound system.

ﬂ

PHONES Jack

Accepts a standard pair of

stereo headphones (1/4"

stereo phone plug) for

headphone monitoring of

the EX sound without the

need for external

amplification equipment.

The EX5R PHONES jack

is on the front panel.

ﬁ

Breath

Controller Jack

Plug an optional

Yamaha BC3 Breath

Controller in here for

expressive breath

control capability.

➡

See page 56 for

more information.

¶

• ‡‚

ﬂª

§

ﬁ

* ⁄, ¤, ‹ and › are not available on EX5R.

Intro/E/qx 5/21/98 11:27 AM Page 15

16

Introductory

Section

Setting Up

The EX5 or EX7 can be used virtually on its own — with a pair of headphones or a simple

instrument amplifier — or it can be the core of complex and powerful music production

system. Naturally, the EX5R Tone Generator will require an external MIDI keyboard or other

controller.

Power Supply

Before making any other connections the “female” end of the AC power cord supplied with the EX5,

EX5R, and EX7 should be firmly plugged into the rear-panel AC cord socket. Ideally the power cord

should then be plugged into a convenient AC outlet after you've made all other necessary connections

and placed the EX5, EX5R, or EX7 in the position in which it will be used. Always make sure that the

POWER switch is in the OFF (extended) position before plugging the power cord in an AC outlet.

WARNING!

Make sure your EX5, EX5R, or EX7 is rated for the AC voltage supplied in the area in which it is to be

used (as listed on the rear panel). Connecting the unit to the wrong AC supply can cause serious damage to

the internal circuitry and may even pose a shock hazard!

Use only the AC power cord supplied with the EX5, EX5R, or EX7. If the supplied cord is lost or damaged

ands needs to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a

fire and shock hazard!

The type of AC power cord provided with the EX5, EX5R, or EX7 may be different depending on the

country in which it is purchased (a third prong may be provided for grounding purposes). Improper

connection of the grounding conductor can create the risk of electrical shock. Do NOT modify the plug

provided with the EX5/EX5R/EX7. If the plug will not fit the outlet, have a proper outlet installed by a

qualified electrician. Do not use a plug adapter which defeats the grounding conductor.

AC Power Cord

EX5/7, EX5R

Rear Panel

Basic/E/qx 5/21/98 11:21 AM Page 16

External Controllers

In addition to the many realtime controllers provided on the EX5 and EX7 panel (the PITCH wheel,

MODULATION 1 wheel, MODULATION 2 wheel and Ribbon Controller), plus the six Controller

Knobs provided on the EX5, EX5R and EX7, a number of additional controllers can be plugged into

the appropriate rear-panel jacks as required.

■ Foot Switches (EX5 and EX7)

At the very least you’ll probably want to plug a footswitch into the SUSTAIN jack for piano-type

sustain control. You might also want to plug a second footswitch into the FOOTSWITCH jack to

control other on/off type functions such as sostenuto, portamento, or arpeggio hold for the

sophisticated automatic arpeggiator feature. Footswitch functions are assigned via the UTILITY

mode, as described on page 275.

■ Foot Controllers (EX5 and EX7)

The EX5 and EX7 have jacks for two optional Yamaha FC7 Foot Controller units: FOOT VOLUME

and FOOT CONTROLLER. An FC7 plugged into the FOOT VOLUME jack can be used (as its

name implies) for main volume or expression control. The desired FOOT VOLUME function can

be selected via the UTILITY mode Controller display, as described on page 275. An FC7 plugged

into the FOOT CONTROLLER jack can be assigned for continuous realtime control of a wide

range of parameters (pages 104 and 163).

For more information on Foot Controller setup and operation, see the instructions packed with the supplied

FC7 Foot Controller.

■ Breath Controller

A Breath Controller can be an essential expressive tool for realistic expression with wind-

instrument type voices and unprecedented expressive control with other voices. Plug an optional

BC3 Breath Controller into the BREATH jack. The Breath Controller is ideal for controlling

parameters that would normally be affected by a wind player's breath: dynamics, timbre, pitch, and

others.

For more information on Breath Controller setup and operation, see the instructions packed with the optional

BC3 Breath Controller.

17

Introductory

Section

Basic/E/qx 5/21/98 11:21 AM Page 17

18

Introductory

Section

Audio Connections

■ Headphones

For private listening and practice headphones are ideal. You don't have to hook up and complete

sound system, and you won't disturb the neighbors no matter how loud or late you play.

Recommended Yamaha headphones for EX monitoring are the HPE-170, HPE-160, or HPE-150

Stereo Headphones. Any standard pair of stereo headphones with a 1/4" stereo phone plug can be

used.

■ Instrument Amplifier or Stereo Sound System

The EX voices and effects are designed to sound their best in stereo, so you should always use a

stereo sound system to appreciate the full impact of the EX voices and expressive features. The

OUTPUT L/MONO and R jacks can be connected directly to musical instrument amplifiers

designed for keyboard use, or to the line inputs of a mixing console. It is also possible to connect

the outputs directly to the inputs of a multitrack or stereo tape recorder. When connecting to a

mono sound system be sure to use only the OUTPUT L/MONO jack.

Make sure that both the EX and your sound system are turned OFF when making connections.

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

EX5/7

Headphones

EX5R

PHONES

OUTPUT L /

MONO jack

R

Amplified Speaker L Amplified Speaker R

Headphones

PHONES

OUTPUT L /

MONO jack

R

Amplified Speaker L Amplified Speaker R

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

1 2 3 4 5 6

Basic/E/qx 5/21/98 11:21 AM Page 18

■ Mixing Console

In addition to the stereo OUTPUT L/MONO and R jacks, the EX5 and EX5R initially have two

individual outputs: the INDIVIDUAL OUTPUT 1 and 2 jacks. An additional four individual

outputs (3 through 6) can be added by installing the optional EXIDO1 Individual Output Board.

The stereo and individual outputs can be fed to separate channels of a mixing console for

individual processing. Individual “parts” of a performance setup can be assigned to different

individual outputs via the PERFORMANCE EDIT mode PART display (see page 164).

See page 278 for details on installation of the EXIDO1 Individual Output Board.

The EXIDO1 Individual Output Board and EXDGO1 Digital Output Board use the same option slot, so only

one can be installed at a time.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 L R

EX5

or

EX5R

Mixer

Speakers

Amp

L

OUTPUT L

OUTPUT

L/MONO

R

INDIVIDUAL

OUTPUT

123456

1 2 3 4 5 6 7 8

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

1 2 3 4 5 6

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

EXIDO1

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 L R

HeadphoneHeadphone

Mixer

Speakers

Amp

L

OUTPUT L

OUTPUT

L/MONO

R

INDIVIDUAL

OUTPUT

EXIDO1

PHONESPHONES

1234

1 2 3 4 5 6

EX7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 L R

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

1 2 3 4 5 6

Headphones

EX5

or

EX5R

EX7

Mixer

Speakers

Amp

L

OUTPUT L

R

OUTPUT

L/MONO

PHONES PHONES

INDIVIDUAL

OUTPUT 1

INDIVIDUAL

OUTPUT 2

R

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 L R

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

Headphones

Mixer

Speakers

AMP

L

OUTPUT L

R

OUTPUT

L/MONO

R

MUSIC SYNTHESIZER

REALTIME CONTROL

EXTENDED SYNTHESIS

19

Introductory

Section

Basic/E/qx 5/21/98 11:21 AM Page 19

20

Introductory

Section

■ Digital Audio (Option)

The optional EXDGO1 Digital Output Board provides an AES/EBU-format digital output which

can be directly connected to an external digital recorder, mixing console, or other digital processing

equipment. This allows the EX sound to be recorded or processed with maximum quality. The

EXDGO1 Digital Output Board also includes a WORD CLOCK IN connector for precise digital

audio synchronization with the external digital devices.

See page 278 for details on installation of the EXDGO1 Digital Output Board.

The EXDGO1 Digital Output Board and EXIDO1 Individual Output Board use the same option slot, so only

one can be installed at a time.

When connecting the EXDGO1 (Digital Output AES/EBU [XLR] jack) and an external audio device, use the

XLR cable with the impedance characteristics, 110 Ω.

When receiving word clock from an external audio device, you are required to connect the EXDGO1 (Word

Clock In [BNC] jack) and the external audio device. In this case, use the BNC connector/coaxial cable with

the impedance characteristics, 75 Ω.

AC INLET

DAT

EX5R

DAT

O3D

INDIVIDUAL OUTPUT

6543

DIGITAL OUTPUT WORD CLOCK IN

AES EBU

DAT

EX5/7

DAT

O3D

INDIVIDUAL OUTPUT

6543

DIGITAL OUTPUT WORD CLOCK IN

AES EBU

Basic/E/qx 5/21/98 11:21 AM Page 20

Страница загружается...

Yamaha EX7, EX5, EX5R Руководство пользователя

Похожие модели бренда