Yamaha YM-2000 Инструкция по применению

Категория
Музыкальные инструменты
Тип
Инструкция по применению

Это руководство также подходит для

MULTI METRONOME
YM-2000
YM-2000
OWNER’S MANUAL / MODE D’EMPLOI
BEDIENUNGSANLEITUNG /
RHYTHM
TEMPO
STEP MUTE
NOTE
PITCH
MUTE
UP
DOWN
RHYTHM
NOTE
TEMPO
PITCH
POWER
MUTE
YM-2000
MULTI METRONOME
MULTI METRONOME
YM-2000
YM-2000
OWNER'S MANUAL
PRECAUTIONS
To prevent damage, do not use the metronome in the following
locations:
places where the unit will be in direct sunlight;
places subject to temperature and humidity extremes;
places that are sandy or dusty.
To power the metronome, use only a CR-2025 lithium battery.
For maximum battery life, always be sure the metronome is turned
OFF when not in use.
If an exhausted battery is left in the unit for an extended period of time,
it may leak and cause malfunctioning of the unit. When the battery
becomes exhausted, always remove it and replace it as soon as
possible.
Do not use press or bump on the LCD panel.
If the indications on the LCD panel are difficult to see, adjust the
viewing angle.
Do not subject the metronome to strong physical shock or vibration. Do
not use excessive force on any of the controls.
Never use solvents such as benzene or thinner to clean the
metronome. Wipe clean with a soft, dry cloth.
After reading the owner's manual, keep it in a safe place for future
reference.
SPECIFICATIONS
Indicators : Display (LCD panel), tempo indicator
Tempo : 30 – 240 beats/minute, accuracy ±0.2 %
Metronome beats : 1 – 7 beats, duplets, triplets, quintuplets
Rhythm patterns : 30 preset patterns
Note setting range : C4 – B4 (in half-tone steps), accuracy ±1
cent
Standard pitch setting range
: 438 Hz – 445 Hz
Auto Power Off Function : Metronome mode — after approx. 15
minutes
Note/standard pitch setting mode — after
approx. 5 minutes
Other Functions : Operation confirmation beep, memory
backup function
Connector : 3.5 ear phone jack (monaural)
Power Source : Lithium battery x 1 (CR-2025)
Battery Life : Approx. 45 hours
Dimensions (W x H x D) : 102 x 12 x 64 mm (4-1/8" x 1/2" x 2-1/2")
Weight (including battery) : 65 g (2.1 oz)
Accessories : Lithium battery x 1 (CR-2025),
Hard case (can be used as stand)
* Specifications and design subject to change without notice.
Thank you for purchasing the YAMAHA YM-2000 Multi
Metronome.
Please read this manual thoroughly and keep it in a safe place for
future reference.
Never dispose of used batteries by burning them.
Also make sure to keep batteries away from children.
FEATURES OF THE YM-2000
Metronome Function
11 beat patterns (1 to 7 beats, duplets, triplets, quintuplets) and 30
rhythm patterns can be played at a variable tempo (30 to 240 beats
per minute).
Note/Standard Pitch Sound Generating Function
The unit can generate a tuning note selectable within one octave (C –
B) in half-tone steps. The standard pitch (for note A) can be set within
the range of 438 to 445 Hz.
Other Functions
* Operation Confirmation Beep
When a button is pressed, a beep sound will comfirm the
operation.
The confirmation beep will also be produced when the metronome
sound is muted.
* Auto Power Off Function
When the unit is used in metronome mode and none of the buttons
is pressed for approximately 15 minutes, the power will
automatically turn off.
When the unit is set to note/standard pitch setting mode and none
of the buttons is pressed for approximately 5 minutes, the power
will automatically turn off.
* Memory Backup Function
This function retains all current settings in memory when the unit is
turned off (POWER button or Auto Power Off). The MUTE function,
however, will be released, and sound will be heard when the unit is
turned on again.
THE HARD CASE
The hard case can be used as a
stand as shown in the illustration on
the right.
COMPONENTS
UP
DOWN
RHYTHM
NOTE
TEMPO
PITCH
POWER
MUTE
YM-2000
MULTI METRONOME
UP button
Earphone jack
This jack allows connection of a standard earphone (3.5 ).
If a stereo headphone is connected, sound will be produced
from one side only. When connecting an earphone the
internal speaker is muted automatically.
DOWN button
POWER button
MUTE button
TEMPO button
PITCH button
RHYTHM button
NOTE button
Speaker
OPERATION
Selecting a Rhythm Pattern and Setting the Tempo
1. Press the RHYTHM button.
"RHYTHM" on the display will blink.
2. Press the UP or DOWN button to
select a rhythm pattern. Each time the
button is pressed, the number on the
display will increase/decrease by one.
When the button is kept pressed, the
number will change continuously.
3. Press the TEMPO button. "TEMPO" on the display will blink.
4. Press the UP or DOWN button to set the desired tempo. Each time
the button is pressed, the tempo value will increase/decrease by
one. When the button is kept pressed, the tempo value will change
continuously.
5. To use without metronome sound, press the MUTE button.
"MUTE" will appear on the display.
* The 8 STEP indicator segments at the bottom of the display light up or
blink according to the rhythm pattern.
* The setting can be returned to its initial value (default) by pressing the
UP and DOWN buttons simultaneously.
Selecting the Note and Setting the Standard Pitch
1. Press the NOTE button. "NOTE" on the
display will blink and the currently set
note will sound.
2. Press the UP or DOWN button to select
the desired note. Each time the button
is pressed, the note will change in half-
tone steps. However, the note will not
change continuously if the button is kept pressed.
3. Press the PITCH button. "PITCH" on the display will blink.
4. Press the UP or DOWN button to adjust the standard pitch (A)
between 438 and 445 Hz. Each time the button is pressed, the pitch
value will change by 1 Hz. However, the pitch will not change
continuously if the button is kept pressed.
5. To set the note and pitch without sound, press the MUTE button.
"MUTE" will appear on the display.
* The standard pitch (438 – 445 Hz) will always be set for note A.
* The setting can be returned to its initial value (default) by pressing the UP
and DOWN buttons simultaneously.
Tempo indicator
The indicator dots light up from left
to right in the set tempo.
Display (LCD Panel)
BATTERY REPLACEMENT
When the battery weakens, the display indications will fade and the
tempo indicator dots grow dim, while the sound volume decreases. In this
case, replace the battery with a new one (CR-2025 lithum battery) as
soon as possible.
Replacement Procedure
1. Remove the battery cover fixing screw at the bottom of the unit and
remove the battery cover by sliding it in the direction of the arrow as
shown in the illustration below.
2. Lift out the old battery using a pointed tool (tweezers etc.).
3. Insert the new battery with its - pole facing down (+ pole must be
visible when inserted).
4. Attach the battery cover and secure it using the fixing screw.
* Always press the POWER button to turn off the unit before changing the
battery.
Bottom
side
After battery replacement, turn on the power to check if
operation is normal. If the unit is operating abnormally,
press the reset button on the bottom side, and then turn on
the power again to check the operation.
* The default settings after resetting the unit are as follows:
Metronome mode, tempo "120", rhythm "11", note "A", pitch "440" Hz
RHYTHM PATTERN LIST
No. Rhythm Pattern
0 1 BEAT (weak)
1 1 BEAT (strong)
2 2 BEATS
3 3 BEATS
4 4 BEATS
5 5 BEATS
6 6 BEATS
7 7 BEATS
8 DUPLETS
9 TRIPLETS
10 QUINTUPLETS
11 ROCK 1
12 ROCK 2
13 ROCK 3
No. Rhythm Pattern
14 16 BEAT 1
15 16 BEAT 2
16 POPS 1
17 POPS 2
18 FUNK 1
19 FUNK 2
20 DISCO
21 BALLAD 1
22 BALLAD 2
23 SHUFFLE 1
24 SHUFFLE 2
25 SWING
26 ROCK WALTZ
27 JAZZ WALTZ
No. Rhythm Pattern
28 BOSSA NOVA
29 SAMBA
30 JAZZ SAMBA
31 SONGO
32 BOLERO
33 TANGO
34 CHA CHA
35 MAMBO
36 RHUMBA
37 BEGUINE
38 WALTZ
39 MARCH
40 ONDO
* No. 0: Single weak beat No. 1: Single strong beat
RHYTHM
TEMPO
STEP MUTE
NOTE
PITCH
MUTE
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly
approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with
this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this
product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not
result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance
with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interfer-
ence, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-
axial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If
you can not locate the appropriate, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena
Park, CA 90620
The above statements apply ONLY to those products distributed by Yamaha Corporations of America or its subsidiaries.
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS
FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN
DEPARTMENT OF COMMUNICATIONS.
Printed in Hong Kong
Battery cover
Reset button
Screw hole
MESURES DE PRECAUTION
Afin de ne pas endommager le métronome ne lutilisez pas dans des
endroits soumis aux conditions suivantes :
plein soleil,
humidité ou températures excessives,
sable ou poussière.
Pour alimenter le métronome, utilisez exclusivement une pile au lithium
CR-2025.
Mettez toujours le métronome hors tension lorsque vous ne lutilisez
pas afin de prolonger au maximum la durée de vie de la pile.
Des fuites pouvant provoquer des anomalies de fonctionnement
peuvent se produire si une pile usée est laissée à lintérieur du
métronome pendant une période prolongée. Veillez à remplacer la pile
le plus rapidement possible lorsquelle est usée.
Nappuyez pas sur laffichage à cristaux liquides et évitez de le cogner.
Si les indications de laffichage sont difficiles à lire ajuster langle de
vision.
Ne soumettez pas le métronome à des chocs ou à des vibrations
importantes. Ne le manipuler jamais avec une force excessive.
Nutilisez jamais de solvants, tels que benzine ou diluant, pour nettoyer
le métronome. Essuyez-le avec un chiffon doux et sec.
Après avoir lu ce mode demploi, conservez-le en un lieu sûr pour
future référence.
Nous vous remercions d’avoir porté votre choix sur le multi
métronome YAMAHA YM-2000.
Veuillez lire attentivement ce mode d’emploi et conservez-le en
un lieu sûr pour future référence.
MULTI MÉTRONOME
YM-2000
YM-2000
MODE D'EMPLOI
NOMENCLATURE
Ne jetez jamais les piles au feu et conservez-les
toujours hors de portée des enfants.
UTILISATION
Sélection d’un motif rythmique et réglage du tempo
1. Appuyez sur la touche [RHYTHM].
Lindication RHYTHM se met à
clignoter sur laffichage.
2. Appuyez sur la touche [UP] ou
[DOWN] pour sélectionner un motif
rythmique. Chaque fois que vous
appuyez sur une de ces touches, le
numéro indiqué sur laffichage
augmente/diminue de un. Lorsque vous maintenez une de ces
touches enfoncée, les numéros défilent de manière continue.
3. Appuyez sur la touche [TEMPO]. Lindication TEMPO se met à
clignoter sur laffichage.
4. Appuyez sur la touche [UP] ou [DOWN] pour régler le tempo.
Chaque fois que vous appuyez sur une de ces touches, la valeur
du tempo indiquée sur laffichage augmente/diminue de un.
Lorsque vous maintenez une de ces touches enfoncée, les valeurs
de tempo défilent de manière continue.
5. Pour rendre le son du métronome inaudible, appuyez sur la touche
[MUTE]. MUTE apparaît sur laffichage.
* Les segments de l’indicateur 8 STEP s’allument ou clignotent à la
partie inférieure de l’affichage selon le motif rythmique sélectionné.
* La valeur de réglage initiale (par défaut) peut être rétablie en appuyant
en même temps sur les touches [UP] et [DOWN].
Sélection d’une note et réglage de la hauteur standard
1.Appuyez sur la touche [NOTE].
Lindication NOTE se met à clignoter
sur laffichage et vous pourrez entendre
le son de la note sélectionnée.
2.Appuyez sur la touche [UP] ou
[DOWN] pour sélectionner la note que
vous souhaitez. Chaque fois que vous
appuyez sur une de ces touches, la note change par bonds de un
demi-ton. Dans ce cas, cependant, les notes ne défileront pas de
manière continue lorsque vous maintenez une de ces touches
enfoncée.
3. Appuyez sur la touche [PITCH]. Lindication PITCH se met à
clignoter sur laffichage.
4. Appuyez sur la touche [UP] ou [DOWN] pour régler la hauteur
standard (A) entre 438 et 445 Hz. Chaque fois que vous appuyez
sur une de ces touches, la hauteur augmente/diminue de un. Dans
ce cas, cependant, la hauteur ne changera pas de manière continue
lorsque vous maintenez une de ces touches enfoncée.
5. Pour régler la note et la hauteur avec le son inaudible, appuyez sur
la touche [MUTE]. MUTE apparaît sur laffichage.
* La note A est toujours réglée à la hauteur standard (438 – 445 Hz).
* Le réglage initial (par défaut) peut être rétabli en appuyant en même
temps sur les touches [UP] et [DOWN].
RHYTHM
TEMPO
STEP MUTE
UP
DOWN
RHYTHM
NOTE
TEMPO
PITCH
POWER
MUTE
YM-2000
MULTI METRONOME
Haut-parleur
Indicateur de tempo
Les points de lindicateur sallument
de gauche à droite en suivant le
tempo sélectionné.
Affichage
(à cristaux liquides)
Prise d’écouteur
Cette prise permet de brancher un écouteur standard (
3,5 ).
Si vous utilisez un casque d’écoute stéréo, le son ne sera
audible que dun seul côté. Le son produit par le haut-parleur
interne est automatiquement coupé lorsque vous branchez un
écouteur.
Touche de rythme
[RHYTHM]
Touche de tempo
[TEMPO]
Interrupteur
dalimentation
[POWER]
Touche de baisse [DOWN]
Touche de montée [UP]
Touche de note
[NOTE]
Touche
dassourdissement
[MUTE]
Touche de hauteur
[PITCH]
NOTE
PITCH
MUTE
FONCTIONS DU YM-2000
Fonction métronome
11 motifs de temps (1 à 7 temps, duolets, triolets, quintolets) et 30
motifs rythmiques peuvent être reproduits à un tempo variable (30 à
240 temps par minute).
Fonction génération de son de hauteur standard/note
Le métronome peut générer une note daccord sélectionnable sur
une plage de une octave (C B) par paliers de un demi-ton. La
hauteur standard (note A) peut être réglée entre 438 et 445 Hz.
Autres fonctions
* Bip de confirmation dutilisation
Lorsque vous sollicitez une touche, un bip est produit pour
confirmer lopération.
Le bip de confirmation est produit même lorsque le son du
métronome est assourdi.
* Fonction de coupure automatique de lalimentation
Lorsque lunité est utilisée en mode métronome, son alimentation
sera automatiquement coupée si aucune touche nest sollicitée
pendant environ 15 minutes.
Lorsque lunité est en mode de réglage de hauteur standard/note,
Son alimentation sera automatiquement coupée si aucune touche
nest sollicitée pendant environ 5 minutes.
* Fonction de conservation de la mémoire
Cette fonction permet de conserver tous les réglages en mémoire
lorsque lalimentation de lunité est coupée (au moyen de
linterrupteur [POWER] ou par coupure automatique de
lalimentation). La fonction MUTE sera désactivée, cependant, et
le son sera de nouveau audible lorsque vous remettez le
métronome sous tension.
LE BOÎTIER
Le boîtier peut être utilisé comme
support de la manière illustrée ci-
contre.
FICHE TECHNIQUE
Indicateurs : Affichage (cristaux liquides), indicateur de
tempo
Tempo : 30 240 temps par minute, précision ±
0,2%
Temps de métronome :1 à 7 temps, duolets, triolets, quintolets
Motifs rythmiques : 30 motifs programmés
Plage de réglage de note : C4 B4 (par paliers de un demi-ton),
précision ± centième
Plage de réglage de hauteur standard
: 438 Hz 445 Hz
Coupure automatique de lalimentation
: Mode métronome au bout de 15 minutes
environ
Mode de réglage de hauteur standard/note
au bout de 5 minutes environ
Autres fonctions : Bip de confirmation, conservation de la
mémoire
Connecteur : Prise de jack d’écouteur (mono)
Source dalimentation : Pile au lithium x 1 (CR-2025)
Durée de vie de la pile : Env. 45 heures
Dimensions
(L x H x P) : 102 (L) x 12 (H) x 64 (P) mm
Poids (pile incluse) : 65 g
Accessoire : Pile au lithium x 1 (CR-2025),
boîtier (pouvant être utilisé comme support)
* Les spécifications et l'aspect externe peuvent être modifiés sans aucun avis.
LE PRESENT APPAREIL NUMERIQUE N'EMET PAS DE
BRUITS RADIOELECTRIQUES DEPASSANT LES LIMITES
APPLICABLES AUX APPAREILS NUMERIQUES DE LA
"CLASSE B" PRESCRITES DANS LE REGLEMENT SUR LE
BROUILLAGE RADIOELECTRIQUE EDICTE PAR LE MINIS-
TERE DES COMMUNICATIONS DU CANADA.
LISTE DES MOTIF RYTHMIQUES
No. Motif rythmique
0 1 temps (faible)
1 1 temps (fort)
2 2 temps
3 3 temps
4 4 temps
5 5 temps
6 6 temps
7 7 temps
8 Duolets
9 Triolets
10 Quintolets
11 Rock 1
12 Rock 2
13 Rock 3
No. Motif rythmique
14 16 Beat 1
15 16 Beat 2
16 Pops 1
17 Pops 2
18 Funk 1
19 Funk 2
20 Disco
21 Balade 1
22 Balade 2
23 Shuffle 1
24 Shuffle 2
25 Swing
26 Valse rock
27 Valse jazz
No. Motif rythmique
28 Bossa nova
29 Samba
30 Samba jazz
31 Songo
32 Boléro
33 Tango
34 Cha Cha
35 Mambo
36 Rhumba
37 Béguine
38 Valse
39 Marche
40 Ondo
* No. 0: Un temps faible No. 1: Un temps fort
REMPLACEMENT DE LA PILE
Lorsque la pile se vide, les indications de laffichage deviennent plus
claires et les points de lindicateur de tempo sassombrissent alors que le
volume diminue. Remplacez alors la pile le plus rapidement possible par
une pile neuve (pile au lithium CR-2025).
Procédure de remplacement
1. Retirez la vis de fixation du couvercle du logement de la pile au dos
du métronome et enlevez le couvercle en le faisant glisser dans le
sens de la flèche de la manière illustrée.
2. Soulevez la pile usée à laide dun objet pointu (pincettes, etc.).
3. Placez la pile neuve avec son pôle - dirigé vers le bas (le pôle + doit
être visible lorsque la pile est en place).
4. Reposez le couvercle du logement et fixez-le à laide de la vis.
* N’oubliez pas d’appuyer sur l’interrupteur [POWER] pour couper
l’alimentation du métronome avant de changer la pile.
Couvercle du
logement de la pile
Bouton de remise
à l’état initial
Dos du
métronome
Trous de la vis
Une fois que vous avez remplacé la pile, mettez le
métronome sous tension pour vérifier quil fonctionne
normalement. Si le métronome ne fonctionne pas
normalement, appuyez sur le bouton de remise à l’état
initial qui se trouve au dos et remettez sous tension pour
vérifier si le fonctionnement est normal.
* Les réglages par défaut rétablis après la remise à l’état initial sont les
suivants :
Mode métronome, tempo “120”, rythme “11”, note “A”, hauteur “440” Hz.
VORSICHTSMASSREGELN
Verwenden Sie das Metronom nicht an Orten, wo es den folgenden
schädlichen Einflüssen ausgesetzt ist:
Direktes Sonnenlicht
Extreme Temperaturen und hohe Luftfeuchtigkeit
Sand oder Staub
Verwenden Sie als Stromquelle ausschließlich Lithiumbatterien des Typs
CR-2025.
Schalten Sie das Metronom nach Gebrauch stets aus, um die Batterie zu
schonen.
Wenn eine verbrauchte Batterie längere Zeit im Gerät gelassen wird, kann
sie auslaufen und Schäden verursachen. Wenn die Batterie schwächer
wird, sollten Sie sie daher entnehmen und so bald wie möglich durch eine
frische ersetzen.
Drücken Sie nicht zu stark auf das Display (Flüssigkristallanzeige), und
setzen Sie es auch keinen Stößen aus.
Wenn die Anzeigen auf dem Display nicht gut lesbar sind, ändern Sie bitte
den Betrachtungswinkel.
Schützen Sie das Metronom vor starken Schlägen und Erschütterungen.
Wenden Sie beim Betätigen der Bedienelemente nicht zu viel Kraft auf.
Verwenden Sie zum Säubern des Metronoms keine Lösungsmittel wie
Benzin oder Verdünner. Entfernen Sie Staub und Schmutz mit einem
weichen, trockenen Tuch.
Bewahren Sie diese Anleitung nach dem Durchlesen gut auf.
Vielen Dank für den Kauf des YAMAHA Multi-Metronoms
YM-2000.
Lesen Sie diese Bedienungsanleitung bitte aufmerksam durch, und
bewahren Sie sie danach für später anfallende Fragen gut auf.
BEDIENELEMENTE
MULTI-METRONOM
YM-2000
YM-2000
BEDIENUNGSANLEITUNG
Bescheinigung des Importeurs
Hiermit wird bescheinigt, daß der / die / das
MULTI METRONOME Typ : YM-2000
Gerät, Typ, Bezeichnung)
in Übereinstimmung mit den Bestimmungen der
VERFÜGUNG 1046/84
(Amtsblattverfügung)
funkentstört ist.
Der Deutschen Bundespost wurde das Inverkehrbringen dieses
Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie
auf Einhaltung der Bestimmungen eingeräumt.
YAMAHA Europa GmbH
Name des Importeurs
DAS ETUI
Das Etui kann, wie rechts abgebildet,
auch als Metronomständer
verwendet werden.
TECHNISCHE DATEN
Anzeigen : Display (Flüssgkristallanzeige), Tempoanzeige
Tempo : 30 bis 240 Schläge/Minute, Genauigkeit ±0,2 %
Taktschlagmuster : 1 Schlag bis 7 Schläge, Duolen, Triolen,
Quintolen
Rhythmusmuster : 30 vorprogrammierte Muster
Noteneinstellbereich : C4 bis B4 (in Halbtonschritten), Genauigkeit ± 1
Cent
Standardtonhöhen-Einstellbereich
: 438 bis 445 Hz
Abschaltautomatik : Metronom-Modus nach ca. 15 Minuten
Noten-/Tonhöheneinstellmodus nach ca. 5
Minuten
Andere Funktionen : Bestätigungston, Speicherschutzfunktion
Anschluß : 3,5 mm Ohrhörerbuchse (Mono)
Stromquelle : eine Lithiumbatterie (CR-2025)
Batterie-Lebensdauer : ca. 45 Stunden
Abmessungen (BxHxT) : 102 x 12 x 64 mm
Gewicht (einschließlich Batterie)
: 65 g
Zubehör : Lithiumbatterie (CR-2025)
Etui (dient auch als Ständer)
* Änderungen der technischen Daten und des Designs vorbehalten.
Rücksetztaste
Schraubenbohrung
Batteriefachdeckel
Unterseite
Schalten Sie das Metronom nach dem Auswechseln der
Batterie ein, um seine Funktion zu prüfen. Sollte es nicht
ordnungsgemäß arbeiten, drücken Sie die Rücksetztaste
an der Unterseite und schalten das Gerät danach zur
erneuten Funktionsprüfung wieder ein.
* Die Vorgabeeinstellungen nach der Rücksetzung sind wie folgt:
Metronom-Modus, Tempo “120”, Rhythmus “11”, Note “A”,
Tonhöhe “440” Hz
UP
DOWN
RHYTHM
NOTE
TEMPO
PITCH
POWER
MUTE
YM-2000
MULTI METRONOME
Lautsprecher
Tempoanzeige
Die Punkte dieser Anzeige leuchten
von links nach rechts im jeweils
gewählten Tempo auf.
Display
(Flüssigkristallanzeige)
RHYTHM-Taste
(Rhythmus)
PITCH-Taste
(Standardtonhöhe)
NOTE-Taste
(Stimmnote)
MUTE-Taste
(Stummschaltung)
POWER-Taste
(Ein/Aus)
TEMPO-Taste
Ohrhörerbuchse
An diese Buchse können Sie einen gewöhnlichen
Ohrhörer (3,5 mm Steckerdurchm.) anschließen.
Wenn Sie Stereokopfhörer anschließen, ist der
Ton nur von einer Seite zu hören. Beim
Anschließen eines Ohrhörers wird der interne
Lautsprecher automatisch stummgeschaltet.
UP-Taste (höher)
DOWN-Taste (niedriger)
BATTERIEWECHSEL
Wenn die Batterie schwächer wird, leidet der Displaykontrast, und die Punkte
der Tempoanzeige werden dunkler, während die Lautstärke proportional
abnimmt. In diesem Fall sollten Sie die Batterie so bald wie möglich durch eine
frische (CR-2025) ersetzen.
Auswechseln der Batterie
1. Entfernen Sie die Halteschraube vom Batteriefachdeckel an der
Unterseite, um den Deckel danach wie in der Abbildung in Richtung des
Pfeils abzuziehen.
2. Nehmen Sie die alte Batterie mit einer Pinzette oder einem ähnlichen
Werkzeug aus dem Batteriefach.
3. Legen Sie die neue Batterie mit dem Minuspol () nach unten ein. (Der
Pluspol der eingelegten Batterie muß sichtbar sein.)
4. Schieben Sie den Batteriefachdeckel wieder auf, um ihn danach mit der
Schraube zu arretieren.
* Schalten Sie das Metronom vor dem Auswechseln der Batterie stets mit der
POWER-Taste aus.
RHYTHMUSMUSTER-VERZEICHNIS
Nr. Rhythmusmuster
0 1 Schlag
(schwach)
1 1 Schlag (stark)
2 2 Schläge
3 3 Schläge
4 4 Schläge
5 5 Schläge
6 6 Schläge
7 7 Schläge
8 Duolen
9 Triolen
10 Quintolen
11 Rock 1
12 Rock 2
13 Rock 3
Nr. Rhythmusmuster
14 16-Beat 1
15 16-Beat 2
16 Pops 1
17 Pops 2
18 Funk 1
19 Funk 2
20 Disco
21 Ballade 1
22 Ballade 2
23 Shuffle 1
24 Shuffle 2
25 Swing
26 Rock-Walzer
27 Jazz-Walzer
Nr. Rhythmusmuster
28 Bossanova
29 Samba
30 Jazz-Samba
31 Songo
32 Bolero
33 Tango
34 Cha-cha-cha
35 Mambo
36 Rumba
37 Beguine
38 Walzer
39 Marsch
40 Ondo
* Nr. 0: einzelner schwacher Schlag Nr. 1: einzelner starker Schlag
BEDIENUNG
Auswählen eines Rhythmusmusters und Einstellen des Tempos
1. Drücken Sie die RHYTHM-Taste. Die
Anzeige RHYTHM blinkt nun zur
Betätigung auf dem Display.
2. Drücken Sie die UP- bzw. DOWN-Taste,
um das gewünschte Rhythmusmuster
zu wählen. Die Nummer auf dem Display
nimmt bei jedem Tastendruck um den
Wert 1 zu bzw. ab. Wenn Sie die Taste gedrückt halten, ändert sich die
Nummer fortlaufend.
3. Drücken Sie die TEMPO-Taste. Die Anzeige TEMPO blinkt zur
Bestätigung auf dem Display.
4. Drücken Sie die UP- bzw. DOWN-Taste, um das gewünschte Tempo
einzustellen. Der Tempowert auf dem Display nimmt bei jedem
Tastendruck um 1 zu bzw. ab. Wenn Sie die Taste gedrückt halten,
ändert sich der Wert fortlaufend.
5. Zum Stummschalten des Metronomtons drücken Sie die MUTE-Taste.
MUTE wird danach zur Bestätigung auf dem Display angezeigt.
* Die 8 STEP-Segmente am unteren Displayrand leuchten bzw. blinken im
Rhythmus des gewählten Musters.
* Zum Rücksetzen einer Einstellung zum Anfangswert (Vorgabeeinstellung)
drücken Sie gleichzeitig auf die Tasten UP und DOWN.
Auswählen der Stimmnote und Einstellen der Standardtonhöhe
1. Drücken Sie die NOTE-Taste. Die
Anzeige NOTE blinkt nun auf dem
Display, und der Stimmton (gegenwärtig
eingestellte Note) ist zu hören.
2. Drücken Sie die UP- bzw. DOWN-Taste,
um die gewünschte Note zu wählen. Die
Note auf dem Display ändert sich bei
jedem Tastendruck um einen Halbtonschritt. Bei gedrückt gehaltener
Taste erfolgt jedoch keine fortlaufende Weiterschaltung.
3. Drücken Sie die PITCH-Taste. Die Anzeige PITCH auf dem Display
blinkt danach zur Bestätigung.
4. Drücken Sie die UP- bzw. DOWN-Taste, um die Standardtonhöhe (für
Kammerton A) auf einen Wert zwischen 438 und 445 Hz einzustellen.
Der Tonhöhenwert auf dem Display ändert sich bei jedem Tastendruck
um 1 Hz. Bei gedrückt gehaltener Taste erfolgt jedoch keine fortlaufende
Weiterschaltung.
5. Zum Stummschalten des Stimmtons drücken Sie die MUTE-Taste.
MUTE wird danach zur Bestätigung auf dem Display angezeigt.
* Die Standardtonhöhe (438 bis 445 Hz) wird stets für Kammerton A eingestellt.
* Zum Rücksetzen einer Einstellung zum Anfangswert (Vorgabeeinstellung)
drücken Sie gleichzeitig auf die Tasten UP und DOWN.
RHYTHM
TEMPO
STEP MUTE
NOTE
PITCH
MUTE
Achten Sie bitte auf korrekte Entsorgung verbrauchter
Batterien. Batterien dürfen nicht verbrannt werden!
Achten Sie bitte auch darauf, daß Batterien nicht in
Kinderhände geraten.
FUNKTIONEN DES YM-2000
Metronomfunktion
11 Taktschlagmuster (1 Schlag bis 7 Schläge, Duolen, Triolen, Quintolen)
und 30 Rhythmusmuster können in variablem Tempo (30 bis 240
Schläge/Minute) gespielt werden.
Noten-/Tonhöheneinstellfunktion
Das Gerät kann eine Stimmnote erzeugen, die innerhalb des Bereichs
einer Oktave (C bis B) wählbar ist. Die Standardtonhöhe (für Kammerton
A) ist innerhalb des Bereichs von 436 bis 445 Hz feineinstellbar.
Andere Funktionen
* Bestätigungston
Beim Drücken einer Taste bestätigt das Gerät die Bedienung durch
einen Piepton. Der Bestätigungston wird auch bei stummgeschaltetem
Metronomton gegeben.
* Abschaltautomatik
Wenn im Metronom-Modus etwa 15 Minuten lang keine Taste betätigt
wurde, schaltet das Gerät automatisch ab.
Wenn im Noten-/Tonhöheneinstellmodus etwa 5 Minuten lang keine
Taste betätigt wurde, schaltet das Gerät automatisch ab.
* Speicherschutzfunktion
Die aktuellen Einstellungen im Speicher bleiben auch beim
Ausschalten des Metronoms erhalten. Die einzige Ausnahme ist die
Stummschaltungsfunktion (MUTE), die deaktiviert wird, so daß beim
erneuten Einschalten wieder Ton zu hören ist.
1 / 1

Yamaha YM-2000 Инструкция по применению

Категория
Музыкальные инструменты
Тип
Инструкция по применению
Это руководство также подходит для

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ