Blackmagic HyperDeck Shuttle HD Руководство пользователя

HyperDeck

Shuttle HD

HyperDeck Shuttle HD

February 2023

Installation and Operation Manual

Languages

To go directly to your preferred language, simply click on the hyperlinks listed in the

contents below.

English 3

日本語 58

Français 114

Deutsch 170

Español 226

中文 282

한국어 338

Русский 394

Italiano 450

Português 506

Türkçe 562

Welcome

Thank you for purchasing your Blackmagic HyperDeck Shuttle HD disk recorder!

When we designed the original Blackmagic HyperDeck disk recorders we wanted to make

it easier to record and play back video using fast SSD storage. Now we are excited to

introduce HyperDeck Shuttle HD!

HyperDeck Shuttle HD is a small, portable HDMI video recorder designed for your

desktop. A large search dial and familiar transport controls let you operate the recorder

with one hand which makes HyperDeck Shuttle HD the perfect companion for live

production with an ATEM Mini switcher. You can even use HyperDeck Shuttle HD as a

teleprompter!

HyperDeck Shuttle HD records to SD cards or external flash disks using ProRes, DNxHD

orH.264 codecs for lightning fast recording and playback.

Please check the support page atwww.blackmagicdesign.com for the latest version of

this manual and updates to the HyperDeck software. Keeping your software up to date will

always ensure you get all the latest features. When downloading software, please register

with your information so we can keep you updated when new software is released. We are

constantly working on new features and improvements, so we would love to hear from you!

Grant Petty

CEO Blackmagic Design

English

Contents

Getting Started 5

Plugging in Power 5

Connecting Video and Audio 6

Plugging in Media 6

Recording Video 7

Playback 8

Using the Search Dial 9

Changing Settings 11

Settings 12

Rear Panel 21

Storage Media 22

SD Card 22

EXT Disk 23

Formatting Media 23

Preparing Media on a Computer 23

Volume Navigation 25

Using the Teleprompter Function 26

Blackmagic HyperDeck Setup 27

Updating the Internal Software 33

Transferring Files over a Network 34

Developer Information 38

Blackmagic HyperDeck Ethernet Protocol 38

Protocol Commands 38

Protocol Details 43

Help 54

Regulatory Notices 55

Safety Information 56

Warranty 57

4HyperDeck Shuttle HD

Getting Started

Getting started with your HyperDeck Shuttle HD is as easy as connecting power, plugging in

anHDMI video source, inserting an SD card or external media, then pressing record!

This section of the manual shows how to get started using your HyperDeck Shuttle HD.

JOG SCR

CLIP

MENU SET

DISK SD

Plugging in Power

To power your HyperDeck Shuttle HD, plug the supplied power adapter into the power input

on the rear panel. Tightening the locking ring secures the power cable to prevent accidental

disconnection.

HDMI OUT

HDMI IN

EXT DISK

SD CARD

ETHERNET

+12V DC

Secure the power adapter into HyperDeck Shuttle HD’s power input

5Getting Started

Connecting Video and Audio

To connect video to your HyperDeck Shuttle HD, plug an HDMI video source into the HDMI

input on the rear panel.

HDMI OUT

HDMI IN

EXT DISK

SD CARD

ETHERNET

+12V DC

Connect your destination equipment to the HDMI output. For example, an ATEM Mini switcher

or an HDMI television.

The HDMI output is also used to view the settings menu when changing settings for your

HyperDeck. This is because the settings menu is viewed via video overlay on the HDMI output.

More information about the menu settings can be found in the ‘changing settings’ section later

in this manual.

TIP If you cannot see your input video source on the connected display, you may be in

playback mode. Press the record button to enable record mode.

HDMI OUT

HDMI IN

EXT DISK

SD CARD

ETHERNET

+12V DC

HDMI

Plug the HDMI output into your destination equipment, such as an HDMI television or ATEM Mini switcher

Plugging in Media

All HyperDeck Shuttle HD disk recorders ship ready to record immediately without having to

configure any settings. All you need is a formatted SD card or external disk.

You can easily format media via the menu settings. You can also format using a computer.

Refer to the ‘formatting media’ section in this manual for more information. You can also

find information about the types of media that are best for recording video and a list of

recommended SD cards and external disks.

To plug in an SD card:

1 Hold the SD card with the gold connectors facing up and align it with the media slot. Now

gently push the card into the slot until you feel it lock firmly into place.

6Getting Started

HDMI OUT

HDMI IN

EXT DISK

SD CARD

ETHERNET

+12V DC

2 Your HyperDeck will verify the SD card. This is shown by an illuminated green SD indicator

on the top of the HyperDeck Shuttle HD. Once verified, the indicator will turn off.

JOG SCR

CLIP

MENU SET

DISK SD

JOG SCR

CLIP

MENU SET

DISK SD

That’s all there is to getting started and your HyperDeck Shuttle HD is now ready for recording

and playback!

Keep reading this manual for detailed information about how to record and play back clips,

change settings, and much more.

Recording Video

After confirming that your video source is displayed on the HDMI destination equipment, you

can start recording straight away!

To start recording, press the record button. When recording to an SD card, the SD indicator

will illuminate red and the record and play buttons will also illuminate. When recording to an

external disk, the disk indicator will illuminate red.

JOG SCR

CLIP

MENU SET

DISK SD

To finish recording, press the stop button.

7Recording Video

Playback

Press the ‘play’ button to start playback. During playback, the play button will illuminate and

the‘disk’ or ‘SD’ media slot indicator will illuminate green.

If there are multiple clips that have been recorded, you can quickly move through them by

pressing the forward and backward skip buttons.

JOG SCR

CLIP

MENU SET

DISK SD

Using the Skip Buttons

Press the backward skip button to cue the clip at the start. Pressing more than once will move

back through previously recorded clips.

Press the forward skip button to move forward through your clips.

JOG SCR

CLIP

MENU SET

DISK SD

Use the forward and backward skip buttons to cue to the start of each clip

TIP To play back video files on your HyperDeck, you will need to set the codec to

match the codec used to record the files. You can do this using the menu. Refer to the

‘changing settings’ section later in this manual for more information.

Looping Clips

During playback, pressing the ‘play’ button again will set your HyperDeck Shuttle HD to loop

allclips until you press the ‘stop’ button.

If you want to loop a single clip, set your HyperDeck to ‘clip’ mode and press the ‘play’ button

once to play and again to loop.

Loop all clips During playback, press the ‘play’ button a second time to loop all recorded clips

Loop current clip When in clip mode, press the ‘play’ button a second time to loop the current clip

8Playback

Clip Mode

Clip mode lets you limit playback to a single clip. For example, with clip mode enabled you can

shuttle or skip to a clip and then press play knowing that playback will stop when the clip ends.

JOG SCR

CLIP

MENU SET

DISK SD

When clip mode is selected, pressing play a

second time will loop the current clip

Using the Search Dial

The search dial provides a fast way to move through your clips and select specific moments

to play, or review them frame by frame. This can be important if you need to locate a specific

moment by visually monitoring the clip as you turn the dial. It is also helpful for parking the

playhead at a specific cue point, ready for the clip to be rolled to air during a live broadcast.

Search dial modes include Jog, Scroll and Shuttle.

Jog Plays through the clip frame by frame allowing precise control.

Scroll

Scroll mode lets you quickly move forwards and backwards through

all your recorded media. As you turn the search dial, scroll is locked

to your movement so you have total control over where to position

playback.

The scroll button will also bring up the volume navigation window

which shows you the file path of the video that you are currently

playing. More information about the volume navigation function can be

found in the ‘volume navigation’ section later in this manual.

Shuttle

Press the ‘jog’ and ‘scr’ buttons simultaneously to enter shuttle mode.

Once in shuttle mode you can rewind or fast forward through your

media by turning the dial left or right. As you turn the dial, the media

will shuttle faster until you reach the maximum speed of x50. To slow

the shuttle speed to a stop, turn the dial back to the start position. To

stop at a specific point during shuttle, press the stop button, or press

play to resume playback at the current position. It’s worth noting the

maximum shuttle speed can be lowered using the setup menu. For

more information, see the ‘Settings’ section later in this manual.

9Playback

JOG SCR

CLIP

MENU SET

DISK SD

Press the dedicated ‘JOG’ or ‘SCR’ buttons

to select jog and scroll search modes

JOG SCR

CLIP

MENU SET

DISK SD

Once a search mode is selected, turn the search dial

TIP To resume normal playback, press the ‘play’ or ‘stop’ button.

10Playback

Changing Settings

Pressing the ‘menu’ button will open the settings menu, which will appear as a video overlay

onthe bottom left corner of your connected HDMI display.

JOG SCR

CLIP

MENU SET

DISK SD

Press the menu button to open the settings menu

Use the search dial to navigate to the submenu or setting

Press the ‘set’ button to select the submenu or setting

Adjust settings using the search dial or the forward and backward skip buttons. Confirm the

selection by pressing the ‘set’ button.

To leave the menu, press ‘menu’ to step back through the options and return to the

home screen.

TIP You can position the menu to any of the four corners of your display using the

setup menu. We recommend turning the menu off when you have finished changing

settings to make sure the HDMI output is a clean feed when connected to an HDMI

switcher, such as ATEM Mini Extreme.

JOG SCR

CLIP

MENU SET

DISK SD

JOG SCR

CLIP

MENU SET

DISK SD

11Changing Settings

Settings

The settings menu is arranged into 5 distinct categories, including record, monitor, audio,

storage and setup. Each of these submenus contain related settings, most of which can be

adjusted using the HyperDeck Shuttle HD control panel. Some settings are display only and will

appear greyed out, for instance, filename prefix. In this case, the setting can be adjusted via the

HyperDeck Setup utility.

Record Menu

Input

Displays the HyperDeck Shuttle HD HDMI input.

Codec

HyperDeck Shuttle HD can record compressed video using H.264, Apple ProRes and DNxHD

codecs. To use the teleprompter function, select ‘teleprompter’.

Trigger Record

There are two trigger record modes available, including video start/stop and timecode run.

Some cameras, such as Blackmagic Pocket Cinema Camera 4K, send a signal over HDMI to

start and stop recording on external recorders. Selecting ‘video start/stop’ will trigger the

HyperDeck to start or stop recording when the record button is pressed on the camera.

Use the ‘timecode’ run option to trigger the unit to start recording when it receives a valid

timecode signal via the HDMI input. When the signal stops, recording will also stop. Disable

trigger recording by selecting the ‘none’ option.

NOTE When recording from an HDMI camera, make sure the output is clean with

overlays turned off as any overlays that are present in your camera’s video output will

be recorded with your image.

12Settings

Monitor Menu

Teleprompter Layout

The monitor menu contains all the settings for when using HyperDeck Shuttle HD as a

teleprompter.

Font Size

Adjust the size of the text by selecting the font size option and pressing set. Turn the dial

clockwise to increase, or counterclockwise to decrease.

Line spacing

Turn the dial to increase or decrease the line spacing.

Side Margin

Adjust the widths of the side margins on both sides of the teleprompter display.

Flip

If your teleprompter monitor is set up to reflect onto glass, such as in front or a camera or at a

speakers podium, you will need to use the flip settings to make it readable for the presenter.

There are two flip modes available:

Flip Horizontally - Use this when the bottom of the teleprompter monitor is mounted

closest to the base of the glass.

Flip Vertically - Use this when the bottom of the teleprompter monitor is mounted away

from the base of the glass.

13Settings

Audio Menu

Recorded Audio Channels

HyperDeck Shuttle HD can record up to 8 channels of PCM audio at a time. To select the

number of channels to record, expand the recorded audio channels list and select 2, 4 or

8 channels.

If the codec is set to H.264, you can also select 2 channels of AAC audio so you can upload

recordings directly to YouTube.

Storage Menu

Connected media will appear in the storage settings. Media 1 will list the name of the connected

SD card and media 2 will display any USB flash disk plugged into to the ext disk connector.

When using a USB hub, such as Blackmagic MultiDock 10G, the active disk is displayed.

USB Spill

If you are using a Blackmagic MultiDock 10G or similar to connect more than one drive via the

‘ext disk’ usb connection, turning USB spill on will ensure that recording will spill from one

external disk to the next.

Connect Network Drive

HyperDeck Shuttle can play HD media from Blackmagic Cloud and other network access

storage via Ethernet.

To connect to a network drive:

1 Using the search dial and set button, select connect network drive. A search dialog will appear.

2 Any servers found on your network will appear in a list. Highlight the drive using the search

dial and press set to select.

14Settings

3 Once your HyperDeck Shuttle is connected, you can select the network drive to connect

to. This drive will appear in the list of available network drives.

NOTE When playing from a network volume, HyperDeck Shuttle HD assumes

guest login on the server. Server access that requires a login and password is not

currently supported.

Format Media

SD cards and media connected via the rear ext disk connection can be formatted directly on

the unit or via a Mac or Windows computer.

Preparing Media on HyperDeck Shuttle HD:

1 Using the search dial and set button, select format media.

2 Select the media to format from the list and press set.

3 Choose the format and press set.

4 A confirmation window will appear detailing which card is to be formatted and the selected

format option. Select format.

5 A formatting window will appear once completed. Select OK.

HFS+ is also known as Mac OS X Extended and is the recommended format as it supports

‘journaling’. Data on journaled media is more likely to be recovered in the rare event that your

storage media becomes corrupted. HFS+ is natively supported by Mac. exFAT is supported natively

by Mac and Windows without needing any additional software but does not support journaling.

Toformat media on a Mac or Windows computer, refer to the ‘formatting media’ section.

Setup Menu

The setup menu contains settings including language selection and default standard as well as

sections for the menu display, network settings and timecode options.

15Settings

Name

When more than one HyperDeck Shuttle HD is on the network, you may wish to give them

discrete names to help identify the different units. This can be done via Blackmagic HyperDeck

Setup or Blackmagic HyperDeck Ethernet Protocol using a terminal application. The name will

appear in the setup menu.

Language

HyperDeck Shuttle HD supports 13 languages, including English, Chinese, Japanese, Korean,

Spanish, German, French, Russian, Italian, Portuguese, Turkish, Ukrainian and Polish.

To select the language:

1 Once the setup menu is highlighted, press set.

2 Scroll the search dial down to select language and press set.

3 Use the search dial to select the language and press set. Once selected you will

automatically return to the setup menu.

Date

To adjust the date, select the date field and press set. Using the search dial you can select the

day, month and year. This will populate the timestamp file suffix when selected.

Time

To adjust the time, select time and press set. Use the search dial to adjust the hours and

minutes. HyperDeck Shuttle HD’s internal clock is a 24 hour clock.

Software

Displays the current software version.

Camera

This setting is helpful when using HyperDeck to record ISO files from multiple cameras and

then editing them on a multicamera timeline in DaVinci Resolve.

Each individual camera identification letter will appear in the files’ metadata, allowing DaVinci

Resolve to identify each angle easily when using the sync bin feature.

Assign your camera using characters A-Z or 1-9

Default Standard

Sometimes the HyperDeck Shuttle HD does not know what video standard you want to use.

This setting will let the HyperDeck know the video standard you want to use most of the time.

A good example is if you have turned on a HyperDeck Shuttle HD, it has no video input

connected and you insert a disk with files on it with 2 different video standards. Which video

16Settings

standard should the HyperDeck play? The default video standard will give it an indication which

video standard you prefer and it will switch to that format and play those files.

The default video standard is also useful when you first turn on a HyperDeck Shuttle HD and

it has no video input and no media disk inserted. In this case, the HyperDeck does not know

which video standard to use for the monitoring output. The default video standard will guide it

on what to do.

However, the default video standard is only a guide. It won’t override anything. So if you had a

media disk with only 1 type of video file on it and you press play, the HyperDeck disk recorder

will switch to that video standard and play. It will ignore the default video standard because it’s

obvious you just want to play the files on the disk.

It’s a similar situation with recording. If you press record, the HyperDeck will just record

whatever video standard is connected to the video input. Plus, once you have done the

recording, the HyperDeck Shuttle HD will playback the same video standard files on the disk,

even if there are other files on the disk that match the default video standard. It’s assumed you

want to playback the same video standard as you just recorded. If you unplug the media disk

and plug it back in again, only then will the default video standard be used to choose which

type of files to play back.

The default video standard is only a guide to help the HyperDeck Shuttle HD make decisions

about what to do when it’s not sure. It’s not an override that forces the deck to behave in any

specific way.

Max Shuttle Speed

The maximum shuttle speed on HyperDeck Shuttle HD is x50 speed. If you want to reduce this

speed, you can select from one of the other speed presets.

Menu Settings

Using the menu settings you can adjust the location and appearance of the menu on the

connected HDMI display.

Appearance

Set your HyperDeck’s onscreen menu to dark or light mode. Light mode will offer more contrast

when media is dark, or when you are in teleprompter mode.

17Settings

Opacity

Adjust the levels to reduce the opacity of the menu overlay on the connected display from the

default 100% to 20%.

Position

The menu overlay will default to the bottom left hand corner of the screen. To move the menu to

a different location, select ‘position’ and press the ‘set’ button. Now you can select the top left,

top right, bottom left or bottom right corner of the screen.

Network Settings

Protocol

Blackmagic HyperDeck is shipped set to DHCP, so once connected, your network server will

automatically assign an IP address and no other network settings will need to be adjusted. If

you need to set a manual address, you can connect via a static IP.

With ‘protocol’ selected press the ‘set’ button to access the menu, scroll to ‘Static IP’ and

press ‘set’.

IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS

Once Static IP is selected, you can enter your network details manually.

To change the IP address:

1 Use the search dial to highlight ‘IP address’ and press the ‘set’ button on your HyperDeck’s

control panel.

2 Using the search dial, adjust the IP address, rotate the search dial to adjust your IP address,

pressing ‘set’ to confirm before adjusting the next set of values.

3 Press ‘set’ to confirm the change and move to the next value.

When you have finished entering your IP address, you can repeat these steps to adjust the

Subnet Mask and Gateway. Once finished, press the ‘menu’ button to exit and return to the

home screen.

18Settings

Timecode Settings

Set your timecode input and output options, including choosing between recording the source

timecode, time of day timecode or setting your timecode manually.

Input

There are four timecode input options available when recording.

Video Input

Selecting video input will take the embedded timecode from HDMI sources with

SMPTE RP 188 metadata. This will maintain sync between your HDMI source and

the file recorded on the HyperDeck Shuttle HD.

Internal Use this option to record time of day timecode via the built in timecode generator.

Last Clip

Regen

By selecting ‘last clip regen’ for your timecode input, each file will start one frame

after the last frame of the previous clip. For example, if your first clip ends on

10:28:30:10, the next clip timecode will start at 10:28:30:11.

Preset If you want to set a timecode manually, select the preset option. Recorded clips will

start at the timecode set via the ‘preset’ setting as shown later in this section.

Drop Frame

For NTSC sources at frame rates of 29.97 or 59.94, you can select ‘drop frame’ or ‘non-drop

frame’ timecode. If the source is unknown, select ‘default’. This will maintain the standard of the

input, or default to drop frame if there is no valid timecode.

Preset

You can set your timecode manually by pressing the set button and entering the start timecode

using the search dial and set button. Make sure the ‘preset’ option is selected under the

input menu.

Output

Select your timecode options for your outputs.

Timeline To output a continuous timecode for all clips recorded on a card or drive,

selecttimeline.

Clip Selecting the clip option will output the timecode of each individual clip.

19Settings

File Settings

Filename Prefix

When first set up, your HyperDeck Shuttle HD will record clips to your SD Card or USB flash

disk using the following filename convention.

HyperDeck_0001

HyperDeck_0001 Prefix

HyperDeck_0001 Clip Number

You can change the filename prefix via the HyperDeck Setup utility. For more information, refer

to ‘Blackmagic HyperDeck Setup’ later in this manual.

Timestamp File Suffix

The timestamp added to the filename is turned off by default. If you would like the date and

time recorded in your filename, toggle the ‘timestamp file suffix’ option to on.

HyperDeck_2201061438_0001

HyperDeck_2201061438_0001 Filename Prefix

HyperDeck_2201061438_0001 Year

HyperDeck_2201061438_0001 Month

HyperDeck_2201061438_0001 Day

HyperDeck_2201061438_0001 Hour

HyperDeck_2201061438_0001 Minute

HyperDeck_2201061438_0001 Clip Number

Remote Settings

The remote setting lets the HyperDeck be controlled remotely by other video equipment,

forexample an ATEM Mini Extreme switcher.

Remote

Select ‘remote’ to enable remote control via Ethernet. Deselect remote to control the unit locally.

20Settings

Страница загружается...