Yamaha RX-V667 Инструкция по применению

Категория
Аудио-видео ресиверы
Тип
Инструкция по применению
Owner’s Manual
AV Receiver English for Europe, Asia, Africa,
Oceania and Latin America
En 2
CONTENTS
INTRODUCTION
Features and capabilities ...................................................4
Using the TV OSD to operate the unit .............................5
View or modify content for the current input source
<Content window> ...........................................................5
Configuring settings for this unit
<ON SCREEN menu>......................................................5
Adjust settings for each input source
<OPTION menu> ............................................................. 6
About this manual............................................................. 7
Supplied accessories......................................................... 7
Part names and functions..................................................8
Front panel........................................................................8
Rear panel.........................................................................9
Front panel display .........................................................10
Remote control ...............................................................11
On-screen display ...........................................................12
CONNECTIONS
Connecting speakers ........................................................ 13
Speaker channels and functions...................................... 13
Speaker layout ................................................................ 14
Connecting speakers and subwoofer .............................. 17
Connecting external components....................................21
Cable plugs and jacks .....................................................21
Connecting a TV monitor...............................................22
Connecting BD/DVD players and other devices............25
Connecting game consoles .............................................29
Connecting a multi-format player
or an external decoder .................................................... 29
Connecting an external amplifier ................................... 30
Connecting a SCENE link
playback-compatible device ...........................................30
Using the Trigger function to link
external component power..............................................31
Connecting audio/video recording devices.....................31
Connecting the FM/AM antennas .................................. 32
Setting up the speaker parameters automatically
(YPAO).............................................................................. 33
PLAYBACK
Basic playback procedure ............................................... 40
Adjusting high/low-frequency sound (Tone control) ..... 40
Changing input settings with a single key
(SCENE function) ............................................................ 41
Registering input sources/sound program...................... 41
Enjoying the desired sound field effect.......................... 41
Selecting sound programs and sound decoders.............. 41
Sound programs.............................................................. 45
Configuring the settings of this unit
while viewing the TV screen ........................................... 47
Basic operations via the TV screen display ................... 47
Configuring settings specific to
an individual input source (OPTION menu)................. 49
OPTION menu display and setup................................... 49
OPTION menu ............................................................... 50
Confirming and operating input sources
from the Content window ............................................... 53
Displaying the Content window on the TV screen......... 53
Switching the display between the Now playing view
and the Content browse view ......................................... 53
FM/AM tuning ................................................................. 54
Selecting a frequency for reception (Normal tuning)..... 54
Radio Data System tuning
(U.K. and Europe models only) ..................................... 56
Confirming and operating the FM/AM tuner
from the Content window............................................... 58
Playing back tunes from your iPod™/iPhone™ ........... 60
Connecting the Yamaha iPod universal dock................. 60
Controlling an iPod™/iPhone™ .................................... 60
Playing iPod/iPhone from the menu screen
(Menu browse control) ................................................... 61
Operating basic playback functions
via the remote control (Simple remote control) ............. 63
Playing back iPod™/iPhone™
with wireless connection................................................ 63
Playing back tunes from Bluetooth™ components ...... 65
Connecting a Yamaha Bluetooth
wireless audio receiver................................................... 65
Pairing Bluetooth™ components ................................... 65
Using Bluetooth™ components ..................................... 66
En 3
SETUP
Configuring input sources (Input menu) .......................67
Configuring input sources ..............................................67
Input menu......................................................................68
Editing the SCENE function (SCENE menu) ...............71
Editing a scene................................................................ 71
SCENE menu..................................................................72
Setting sound program parameters
(Sound Program menu) ...................................................73
Editing sound programs..................................................73
CINEMA DSP parameters ............................................. 74
Parameters usable in certain sound programs ................76
Parameters usable in surround decoder .......................... 77
Setting various functions (Setup menu) .........................78
Operating the Setup menu ..............................................78
Setup menu .....................................................................79
Manages settings for speakers ........................................79
Setting the audio output function of this unit .................83
Setting this unit’s video output function.........................84
Setting HDMI functions .................................................85
Setting this unit’s multi-zone function ...........................87
Making the receiver easier to use ................................... 88
Language ........................................................................89
Confirming information of this unit
(Information menu) .........................................................90
Selecting information .....................................................90
Controlling other components
with the remote control.................................................... 91
Keys connecting external components ...........................91
Default remote control code settings..............................92
Registering remote control codes for
external component operations.......................................92
Resetting all remote control codes ................................. 93
Extended functionality that can be configured
as needed (Advanced Setup menu).................................94
Displaying/Setting the Advanced Setup menu ...............94
Setting the impedance of speakers .................................94
Avoiding crossing remote control signals
when using multiple Yamaha receivers .......................... 95
Changing TV format ...................................................... 95
Removing HDMI video output up-scaling limits........... 95
Changing FM/AM frequency steps
(Asia and General models only)..................................... 96
Initializing various settings for this unit......................... 96
Using the HDMI Control function ................................. 97
Using multi-zone configuration .................................... 100
Connecting Zone2 ........................................................ 100
Controlling Zone2 ........................................................ 101
APPENDIX
Troubleshooting ............................................................. 102
General ......................................................................... 102
HDMI™ ....................................................................... 104
Tuner (FM/AM) ........................................................... 105
iPod™/iPhone™ .......................................................... 106
Bluetooth™ .................................................................. 106
Remote control ............................................................. 107
Glossary .......................................................................... 108
Audio information ........................................................ 108
Sound program information ......................................... 109
Video information ........................................................ 109
Video conversion .......................................................... 110
Information on HDMI™............................................... 111
About trademarks.......................................................... 111
Specifications.................................................................. 112
Index ............................................................................... 114
En 4
INTRODUCTION
Built-in high-quality, high-power 7-channel amplifier
6 HDMI input jacks (5 + 1 VIDEO AUX) supporting Audio Return Channel and 3D
video signal
1-button input/sound program switching (SCENE function)................................41
Speaker connections for 2- to 7.1-channel configurations
Speaker impedance configuration............................................................................................................18
Speaker channels and functions ...............................................................................................................13
Speaker layout..........................................................................................................................................14
Speaker cable connection.........................................................................................................................17
Subwoofer cable connection ....................................................................................................................20
High quality playback using bi-amplification connections .....................................................................18
Automatic settings for speaker acoustic parameters
(YPAO - Yamaha Parametric Room Acoustic Optimizer) ......................................33
External component connection (max. 16 inputs) and playback
External component connection...............................................................................................................21
Protective cover for front panel jacks ........................................................................................................7
Configuring the settings specific for each input source <OPTION menu>.............................................49
Playback from external components........................................................................................................40
Playback from an iPod/iPhone with wired connection............................................................................60
Playback from an iPod/iPhone with wireless connection........................................................................63
Playback from a Bluetooth component (Bluetooth and components sold separately) ............................65
FM/AM tuner
Receiving an FM/AM broadcast..............................................................................................................54
Presetting stations ....................................................................................................................................54
Simple preset tuning ................................................................................................................................54
(U.K. and Europe models) Radio Data System tuning ............................................................................56
(U.K. and Europe models) Automatic traffic information reception.......................................................57
Changing FM mode (Stereo/Mono).........................................................................................................58
(Asia and General models only) Changing FM/AM frequency steps......................................................54
Multi-channel, multi-format playback
Sound field effect selection......................................................................................................................41
Playback without sound field effects .......................................................................................................42
Stereo playback........................................................................................................................................42
Compressed-music playback ...................................................................................................................44
Front panel information display/on-screen display (OSD) on the TV screen
Switching information on the front panel display ...................................................................................10
Operating this unit using the on-screen display.......................................................................................12
Volume adjustment functions
Easy listening at low volumes < Adaptive DRC> ...................................................................................51
Adjusting volume between input sources <Volume Trim> .....................................................................52
Remote control operation
External component operation with this unit’s remote control................................................................91
Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................95
Playing back the audio source in another room
Using the internal amplifier for playback ................................................................................................18
Using the external amplifier for playback .............................................................................................100
Configuring the settings for another room.............................................................................................100
Controlling the external component in another room............................................................................101
Other features
Standby mode after a specific amount of time <Sleep timer>.................................................................11
Charging the iPod/iPhone when this unit is in standby mode <iPod Standby Charge> ..........................69
Features and capabilities
Most of this unit’s functions can be operated by following instructions displayed on the TV screen.
Refer to “Using the TV OSD to operate the unit” on the following pages for information on
functions that can be controlled using the on-screen display.
INTRODUCTION
En 5
This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and
OPTION menus, as well as the Content window that displays the content of current input sources.
Select an input source, SCENE and sound program
Select an input source ..............................................................................................................................47
Select a SCENE .......................................................................................................................................48
Select a sound program............................................................................................................................48
View or modify content for the current input source <Content
window>
Operate the AM/FM tuner
Display a list of preset stations for selection ...........................................................................................59
Display information on the station currently received.............................................................................58
Perform operations such as searching for and registering stations using the Utility <Utility> ...............58
Display the list of iPod music sources
Display the list of iPod music sources for selection ................................................................................61
Perform operations such as play, stop and pause using the TV screen <Menu browse control> ............61
Perform basic playback functions such as play, stop and pause
via the remote control <Simple remote control> .....................................................................................63
Configuring settings for this unit <ON SCREEN menu>
Display the ON SCREEN menu on the TV screen..................................................................................47
Select and configure an input source
Select an input source ..............................................................................................................................47
Play the audio/video signal from the selected input source.....................................................................40
Change the input source name <Rename/Icon Select> ...........................................................................68
Select the audio input jack separately from the video input jack <Audio In>.........................................69
Specify a format for digital audio signals <Decoder Mode>...................................................................69
Enhance the sound of compressed audio <Enhancer>.............................................................................69
Output a video signal input from another input source
while playing a multi-channel audio signal <Video Out> .......................................................................70
Charge the iPod/iPhone when this unit is in standby mode <Standby Charge>......................................69
Select and configure a SCENE
Select a SCENE .......................................................................................................................................48
Register or clear settings for a selected SCENE <Save>, <Reset> .........................................................72
Turn on a Yamaha BD/DVD player or CD player connected to this unit automatically
when a SCENE is selected <SCENE IR>................................................................................................72
Select and adjust a sound program (sound program)
Select a sound program............................................................................................................................48
Adjust sound program parameters ...........................................................................................................73
Display settings information for this unit
Display audio signal information <Audio Signal>..................................................................................90
Display video signal information <Video Signal> ..................................................................................90
Display HDMI signal information <HDMI - Monitor Info.>..................................................................90
Adjust acoustic parameters to match your speakers and listening environment
Specify speaker acoustic parameters automatically
(Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................33
Set up this unit’s speaker configuration simply <Power Amp Assign> ..................................................79
Specify settings for each speaker <Configuration>.................................................................................80
Control volume control for each speaker <Level> ..................................................................................81
Apply speaker distance settings <Distance> ...........................................................................................81
Control equalizer sound quality <Parametric EQ>..................................................................................82
Adjust test tone speaker <Test Tone> ......................................................................................................82
Adjust audio signals output from this unit
Correct lag between audio and video signals <Lipsync> ........................................................................83
Select a dynamic range adjustment method <Dynamic Range> .............................................................83
Specify the maximum volume <Max Volume> .......................................................................................83
Specify the initial volume <Initial Volume>............................................................................................84
Adjust DSP effect and volume level <Adaptive DSP Level>..................................................................84
Adjust video signals output from this unit
Convert analog video signal to another type of signal <Analog to Analog Conversion> .......................84
Specify the resolution and aspect ratio of analog video signal converted to HDMI or specify upscaling
resolution for 480i/576i- or 480p/576p-HDMI output signal <Processing> ...........................................85
Using the TV OSD to operate the unit
INTRODUCTION
Using the TV OSD to operate the unit
En 6
HDMI settings
Assign the audio input source for the TV <TV Audio Input>.................................................................86
Listen to TV audio with HDMI cable connection <ARC (Audio Return Channel)>..............................86
Transmit HDMI audio/video to the TV during standby mode <Standby Through> ...............................87
Change the output destination of HDMI input audio signals <Audio Output>.......................................87
Enable listening in multiple rooms (multi-zone function)
Adjust Zone2 volume <Zone2 Set>.........................................................................................................87
Specify other functions for this unit
Enter standby mode automatically when no operations are performed <Auto Power Down>................88
Adjust the brightness of the front panel display <Dimmer> ...................................................................88
Change the wall paper displayed on the TV screen <Wall Paper>..........................................................88
Specify the function of the TRIGGER OUT jack for controlling external components
<Trigger Output> .....................................................................................................................................89
Prohibit changes to settings <Memory Guard> .......................................................................................89
Select a language
Change the language displayed on the TV screen <Language>..............................................................89
Adjust settings for each input source <OPTION menu>
Display the OPTION menu on the TV screen .........................................................................................49
Select the 5.1-channel signal playback method <Extended Surround>...................................................51
Adjust bass and treble levels <Tone Control> .........................................................................................50
Enable low-volume background music <Adaptive DRC>.......................................................................51
Adjust the volume of input sources <Volume Trim>...............................................................................52
(U.K. and Europe models) Automatically search for and receive a traffic station <Traffic Program> ...52
Adjust the vertical position of dialogues <Dialogue Lift> ......................................................................51
INTRODUCTION
Using the TV OSD to operate the unit
En 7
About this manual
Supplied accessories
Check that you received all of the following parts.
Remote control
Batteries (AAA, R03, UM-4) x 2
YPAO microphone
AM loop antenna
Indoor FM antenna
VIDEO AUX input cover
Some features are not available in certain regions.
This manual is created prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and
product, the product has priority.
dHDMI1” (example) indicates the name of the parts on the
remote control. Refer to the “Remote control” (
p. 11) for the
information about each position of the parts.
J
1 indicates that the reference is in the footnote. Refer to the
corresponding numbers on the bottom of the page.
indicates the page describing the related information.
Click on the “ ” at the bottom of the page to display the
corresponding page in “Part names and functions.
Front panel
Rear panel
Front panel display
Remote control
Attaching the VIDEO AUX input cover (supplied)
To protect against dust, attach the supplied VIDEO AUX input
cover to the VIDEO AUX jacks when you do not use the jacks.
To remove the cover, push the left section of it.
Attach the cover
PUSH
Remove the cover
Installing batteries in the remote control
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert two AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
Replace the batteries with new ones if the remote control can
only be operated within a narrow range.
NOTE
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than 2 minutes, or leaving exhausted batteries in the remote
control, may clear the remote control codes. If this should occur,
replace the batteries with new ones, and set the remote control
codes.
a
c
b
Battery compartment
cover
Battery compartment
INTRODUCTION
En 8
Front panel
a MAIN ZONE A (MAIN ZONE Power)
Switches this unit between on and standby mode.
b HDMI Through/iPod Charge indicator
Lights up in any of the following cases while the unit is in standby
mode.
When the Standby Through function is enabled and audio/video
from an external component connected with HDMI is output to a TV
during standby mode (
p. 87).
When an iPod/iPhone, which is placed in the Yamaha iPod universal
dock, is charging while the unit is in standby mode (
p. 63).
This indicator also lights up when the Yamaha iPod wireless receiver
is connected to this unit (
p. 63).
c YPAO MIC jack
Connect the supplied YPAO microphone and adjust the speaker balance
automatically (
p. 33).
d ZONE2
When this unit is connected to an external amplifier located in another
room, this key switches that amplifier between on and standby
(
p. 101).
When speakers in another room are connected to this unit, this key
switches the built-in amplifier for those speakers on and off
(
p. 101).
e ZONE CONTROL
Switches to Zone2 operation mode. This unit, or its remote control,
can be used to select input sources or adjust volume for an external
amplifier in another room or the built-in amplifier for speakers in
another room (
p. 101).
f INFO
Changes the information displayed on the front panel display
(
p. 10).
g MEMORY
Registers FM/AM stations as preset stations (
p. 55). J1
h PRESET j / i
Selects an FM/AM preset station (
p. 58). J1
i FM/AM
Sets the FM/AM tuner band to FM or AM (
p. 54). J1
j Front panel display
Displays information on this unit (
p. 10).
k TUNING jj / ii
Changes FM/AM tuner frequencies (
p. 54). J1
l PURE DIRECT
Switches this unit to Pure Direct mode (
p. 44).
m PHONES jack
For plugging headphones in. Sound effects applied during playback
can also be heard through the headphones.
n INPUT l / h
Selects an input source from which to playback. Press either the left or
right key repeatedly to cycle through the input sources in order.
o SCENE
Switches the input source and the sound program with a single button
(
p. 41). When this unit is in standby mode, press this key to switch
on.
p TONE CONTROL
Adjusts high-frequency/low-frequency output of speakers/headphones
(
p. 40).
q PROGRAM l / h
Selects a sound program (
p. 41). Press the left or right key
repeatedly to cycle through sound programs.
r STRAIGHT
Changes a sound program to straight decoding mode (
p. 42).
s VIDEO AUX jacks
For connecting game consoles to this unit temporarily (
p. 29).
Attach the supplied VIDEO AUX input cover when not using this jack
(
p. 7).
t VOLUME
Adjusts the volume level.
Part names and functions
VIDEO
AUX
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
VOLUME
TV
BD
DVD
CD
RADIO
INPUT
PROGRAM
SCENE
VIDEO
AUDI OLR
INFO
MEMORY
PRESET
TUNING
YPAO MIC
PURE DIRECT
FM AM
HDMI IN
ZONE2 ZONE CONTROL
MAIN ZONE
p rn q
a
omt
c
s
jd g h lfe i kb
J
1 : Usable when you have selected TUNER input.
INTRODUCTION
Part names and functions
En 9
Rear panel
a DOCK jack
For connecting an optional Yamaha iPod universal dock (such as
YDS-12), iPod wireless receiver (YID-W10), or Bluetooth wireless
audio receiver (YBA-10) (
p. 60, p. 63, p. 65).
b PHONO jacks
For connecting a turntable (
p. 28).
c HDMI OUT jack
For connecting an HDMI - compatible TV to output audio/video
signals (
p. 23).
d ANTENNA jacks
For connecting AM and FM antennas (
p. 32).
e MONITOR OUT jacks
f REMOTE IN/OUT jacks
For connecting an external component that supports the remote
control function (
p. 30).
g HDMI1-5 jacks
For connecting external components equipped with HDMI-
compatible outputs to receive audio/video signals (
p. 25).
h SPEAKERS terminals
For connecting the front, center, surround and surround back speakers
(
p. 17). Connect the presence speakers (p. 17) or the speakers for
Zone2 (
p. 18) to the EXTRA SP jacks.
i VOLTAGE SELECTOR
(Asia and General models only)
Select the switch position according to your local voltage (Refer to
Quick Reference Guide).
j Power cable
For connecting this unit to an AC wall outlet.
k AV1-6 jacks
For connecting to external components equipped with audio/video
outputs to receive audio/video signals (
p. 26).
l AV OUT jacks
For outputting audio/video signals received when analog inputs (AV3-
6 or AUDIO1-2) are selected (
p. 31).
m AUDIO1-2 jacks
For connecting external components equipped with analog audio
outputs to input sound into this unit (
p. 28).
n TRIGGER OUT jack
For connecting an external component that supports the trigger
function to operate it linked with operation of this unit (
p. 31).
o MULTI CH INPUT jacks
For connecting a player that supports a multi-channel output
(
p. 29).
p AUDIO OUT jacks
For outputting audio signals received when analog jacks, such as the
AV5-6 or AUDIO1-2 are selected (
p. 31).
q ZONE2 OUT jacks
Outputs sound of this unit to an external amplifier set in a different
room. (
p. 100).
r PRE OUT terminals
For connecting a subwoofer with built-in amplifier or an external
power amplifier (
p. 20, p. 30).
VIDEO jack For connecting a TV capable of receiving video
input, and outputting video signals to it (p. 23).
COMPONENT
VIDEO jacks
For connecting TV that are compatible with
component video signals, using three cables to
output video signal (p. 23).
HDMI
OUT
AV
OUT
ARC
COMPONENT
VIDEO
VIDEO
MONITOR OUT
P
R
P
B
Y
AUDIO
OUT
ZONE2
OUT
SURROUND
SUR.BACK
PRE OUT
SUBWOOFER
1
2
FRONT
CENTERSINGLE
(
TV
)
AV 4
AV 5
AV 6
AUD
IO 1
AUD
IO 2
M
U
L
T
I C
H
IN
P
U
T
O
PTI
C
AL
HDMI 1
(
D/DVD
)
HDMI 2
H
DMI
3
HDMI
4
HDMI
5
C
ENTER
SU
RR
OU
ND
SU
RR
OU
N
D
BA
C
K
/
BI-AM
P
S
IN
G
L
E
FR
O
N
T
S
UBW
OO
FER
SUR.BACK
S
URROUN
D
T
RIGGER OUT
+12
V
0
.1A MAX
.
FRON
T
C
ENTER
IN
REMOTE
OUT
G
ND
S
VIDE
O
ANTENNA
ANTENNA
FM
FM
G
ND
GND
AM
AM
75
75
S
PEAKERS
Distinguishing the input and output jacks
The area around the audio/video output jacks is marked
in white to prevent connection errors. Use these jacks to
output audio/video signals to a TV or other external
component.
Output jacks
DOCK
OPTICAL
(
TV
)
AV 3
AV 1
AV 2
AV 4
AV 5
AV 6
AUDIO 1
AUDI O 2
M
U
LTI C
H
IN
P
U
T
COAXIAL
(
CD
)
COAXIAL
OPTICAL
VIDEO
HDMI 1
(
BD/DVD
)
HDMI 2 HDMI 3
HDMI 4 HDMI 5
CENTER
SURROUND SURROUND
BACK/BI-AMP
SINGLE
EXTRA SP
ZONE2/
PRESENCE
FRONT
COMPONENT
VIDEO
P
R
P
B
Y
HDMI
OUT
AV
OUT
SUBWOOFER
SUR.BACK
SURROUND
TRIGGER OUT
+12V
0.1A MAX.
FRONT
CENTER
ARC
IN
REMOTE
OUT
COMPONENT
VIDEO
VIDEO
MONITOR OUT
P
R
P
B
Y
AUDI O
OUT
ZONE2
OUT
SURROUND
SUR.BACK
PRE OUT
SUBWOOFER
1
2
FRONT
CENTERSINGLE
ANTENNA
FM
GND
AM
75
PHONO
GND
S VIDEO
ANTENNA
FM
GND
AM
75
SPEAKERS
MAINS
pq
aecbgd h
klm
j
o rn
f
i
(Ex: U.K. and Europe models)
INTRODUCTION
Part names and functions
En 10
Front panel display
a HDMI indicator
Lights up during normal HDMI communication when any of the
HDMI1-5 inputs are selected.
b CINEMA DSP indicator
Lights up when a sound field effect that uses CINEMA DSP
technology is selected.
c ENHANCER indicator
Lights up when the Compressed Music Enhancer mode is turned on
(
p. 44).
d CINEMA DSP 3D indicator
Lights up when CINEMA DSP 3D is activated (
p. 43).
e Tuner indicator
Light up according to the status of a received station (
p. 54).
f SLEEP indicator
Lights up when the sleep timer is on (
p. 11).
g ZONE2 indicator
Lights up when the audio output to Zone2 is enabled (
p. 101).
h MUTE indicator
Flashes when audio is muted.
i VOLUME indicator
Displays the current volume level.
j Cursor indicators
Light up if corresponding cursors on the remote control are available
for operations.
k Multi information display
Displays a range of information on menu items and settings.
l Speaker indicators
Indicate speaker terminals from which signals are output.
SW
C
LR
SL SR
SBL SBRSB
PR
PL
Front speaker L
Surround speaker L
Subwoofer
Front speaker R
Surround speaker R
Center speaker
Surround back
speaker L
Surround back
speaker R
Surround back
speaker J1
Presence speaker L
Presence speaker
R
Switching information on the front panel display
The front panel can display sound programs and surround
decoder names as well as the active input source.
Press fINFO repeatedly to cycle through input source J2
sound program surround decoder in order.
SWSW
C
LR
SL SR
SBL SBR
Standard
MOVIE
VOL.
Input source name
Sound program (DSP program)
STEREO
SLEEP
VOL.
TUNED
SW
C
LR
SL SR
MUTE
ENHANCER
3
ZONE
2
SBL SBRSB
PR
PL
jk lj
abcdefihg
J
1 : “SB” is displayed when using a 6.1-channel configuration only.
J
2 : During FM/AM reception, the frequency is displayed instead of the input source.
INTRODUCTION
Part names and functions
En 11
Remote control
a Remote control signal transmitter
Transmits infrared signals.
b MAIN/ZONE2
Switches the zone to be operated by the remote control between the
Main zone and Zone2 (
p. 101).
c SOURCE A (SOURCE Power)
Switches an external component on and off.
d Input selector
Select an input source on this unit from which to playback.
e Radio control keys
Operates the FM/AM tuner. These keys are used when using the tuner
input.
f INFO
Cycles the information displayed on the front panel display (the name
of the currently selected input source, the sound program, the
surround decoder, the FM/AM tuner frequency, etc.).
g Sound selection keys
Switch between the sound field effect (sound program) you are using
and the surround decoder (
p. 41).
h SLEEP
Switches this unit to standby mode automatically after a specified
period of time has elapsed (sleep timer). Press this key repeatedly to
set the time for the sleep timer function.
The SLEEP indicator lights up when the sleep timer is on.
i SCENE
Switch the input source and the sound program with a single button
(
p. 41). When this unit is in standby mode, press this key to switch on.
j ON SCREEN
Turns on and off the ON SCREEN menu.
k Cursor B / C / D / E, ENTER, RETURN
l External component operation keys
Operate recording, playback, and menu displays etc. for external
components (
p. 91). J1
m Numeric keys
Enter numbers.
n TV control keys
Operate a monitor such as a TV.
o CODE SET
Sets remote control codes for external component operations
(
p. 92).
p RECEIVER A (RECEIVER Power)
Switches this unit between on and standby mode.
q SOURCE/RECEIVER
Switches remote control key function to operate this unit or an
external component (
p. 91). Operate an external component when
this key glows green, or this unit when this key glows orange.
r OPTION
Turns on and off the OPTION menu (
p. 49).
s VOLUME +/-
Adjust the volume level (
p. 40).
t MUTE
Turns the mute function of the sound output on and off (
p. 40).
SCENE
RETURN
VOLUME
ENHANCER
SUR. DECODE
STRAIGHTSLEEP PURE DIRECT
HDMI
AV
AUDIO
1234
125
V-AU X
FM
INFO
MEMORY
AM
PRESET
MOVIE MUSIC
BD
DVD
TV
CD
RADIO
MUTE
ENTER
7 856
90
10
1234
REC
ENT
TV
TV VOL TV CH
TOP
MENU
POP-UP
MENU
DISPLAY
SOURCE
MAIN
ZONE 2
CODE SET
INPUT
MUTE
DOCK
MULTI
OPTION
ON SCREEN
5
1234
6
RECEIVER
PHONO
TUNER
TUNING
a
c
b
q
d
e
i
h
j
r
s
t
m
n
o
k
f
l
g
p
HDMI1-5 HDMI1-5 jacks
V-AUX Front panel VIDEO AUX jacks
AUDIO1-2 AUDIO1-2 jacks
AV1-6 AV1-6 jacks
MULTI CH INPUT MULTI CH INPUT jacks
DOCK A Yamaha iPod universal dock, iPod wireless
receiver, or Bluetooth wireless audio receiver
connected to the DOCK jack.
TUNER FM/AM tuner
PHONO PHONO jacks
FM Sets the FM/AM tuner band to FM.
AM Sets the FM/AM tuner band to AM.
MEMORY Presets radio stations.
PRESET F / G Selects a preset station.
TUNING H / I Changes tuning frequencies.
Cursor B / C / D / E Select menu items and change settings when
menus, etc, are displayed.
ENTER Confirms a selected item.
RETURN Returns to the previous screen when menus are
displayed, or close the menu.
Sleep 120min. Sleep 90min.
Sleep 60min.Sleep 30min.Sleep Off
J
1 : You can use lExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input
in advance if you want to operate external components (
p. 92).
INTRODUCTION
Part names and functions
En 12
On-screen display
When a TV is connected to this unit, the supplied remote control can be used to specify and verify this
unit’s settings via menus and options displayed on the TV screen.
The following displays are available in the on-screen display.
Displaying the following menus or viewing the current status of this unit on the
TV screen
ON SCREEN menu
Press ON SCREEN to display the ON SCREEN menu.
OPTION menu
Press OPTION to display the OPTION menu.
Content window
Press Input selector to display the Content window.
ON SCREEN menu
Detailed settings for this unit can be
configured. Use this menu to select desired
settings, change their values, or check the
current status of this unit.
Refer to “SETUP” (
p. 67) for details.
OPTION menu
Configure the optional settings for each input
source. Settings such as “Tone Control” and
“Volume Trim” are applied to this unit
regardless of the input source.
Refer to “Configuring settings specific to an
individual input source (OPTION menu)”
(
p. 49) for details.
Content window
Includes the Content browse view and the
Now playing view. The Now playing view
displays the status of the source from which
music is currently played back. Adjust
settings for music content from the Content
browse view.
Refer to “Confirming and operating input
sources from the Content window” (
p. 53)
for details.
En 13
CONNECTIONS
This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and
connections in your listening environment.
Speaker channels and functions
Front left and right speakers
The front speakers are used for the front channel sounds (stereo
sound) and effect sounds.
Front speaker layout:
Place these speakers at an equal distance from the ideal listening
position in the front of the room. When using a projector screen,
the appropriate top positions of the speakers are about 1/4 of the
screen from the bottom.
Center speaker
The center speaker is for the center channel sounds (dialog, vocals,
etc.).
Center speaker layout:
Place it halfway between the left and right front speakers. When
using a TV, place the speaker just above or just under the center of
the TV with the front surfaces of the TV and the speaker aligned.
When using a screen, place it just under the center of the screen.
Surround left and right speakers
The surround speakers are for effect and vocal sounds with the 5.1-
channel speakers providing rear-area sounds. When used with 6.1/
7.1-channel (including surround back channel), sound for right and
left rear-area is output.
Surround speaker layout:
Place the speakers at the rear of the room on the left and right sides
facing the listening position. They should be placed between 60
degrees and 80 degrees from the listening position and with the
speaker tops at a height of 1.5 – 1.8 m from the floor.
Presence left and right speakers
The presence speakers are used for front effect sounds. When used
in combination with the sound programs (
p. 41), a sound with a
richer and more spatial presence is possible.
Presence speaker layout:
Place the left and right presence speakers 0.5 – 1 m to the outside
of the left and right front speakers respectively. The tops of the
presence speakers should be 1.8 m above the floor.
Surround back left and right speakers
Outputs the rear effect. When used with 6.1ch sound, sound from
the left and right sound surround back speakers is mixed and output
from a single speaker. When used with 5.1ch sound, sound from
surround back speakers is distributed between the left and right
surround speakers.
Surround back speaker layout:
When used with 7.1ch sound, arrange the left and right speakers
towards the listening position, to the rear of the listening position.
Arrange the left and right speakers at least 30 cm apart. The same
separation as with the front left and right speakers is optimum.
When used with 6.1ch sound, arrange these to the rear of the
listening position.
Subwoofer
The subwoofer speaker is used for bass sounds and low-frequency
effect (LFE) sounds included in Dolby Digital and DTS. Use a
subwoofer that is equipped with built-in amplifier.
Subwoofer speaker layout:
Place it to the outside of the front left and right speakers facing
slightly inward to reduce echoes from the wall.
Connecting speakers
Ex.
Ex.
Ex.
Ex.
Ex.
Ex.
CONNECTIONS
Connecting speakers
En 14
Speaker layout
Enjoying the 7.1 channel audio source
7.1-channel speaker layout
(7 speakers + subwoofer)
Connections of speakers
Connect the speakers to the following jacks according to the
speaker layout. Refer to “Front/Center/Surround/Surround back
speaker and Subwoofer connection” and “Presence speaker
connection” for details on connecting speakers (
p. 17).
Assigning a speaker configuration
A speaker configuration must be assigned to this unit to activate the
speakers. Use the “Power Amp Assign” function to easily apply the
appropriate speaker settings to this unit according to the speaker
configuration. Speakers for this layout can be activated at the
default “Power Amp Assign” setting (
p. 79).
Adding the presence speakers for a richer
sound field effect
Presence speaker layout
(7 speakers + subwoofer + presence speakers)
Connections of speakers
Connect the speakers to the following jacks according to the
speaker layout. Refer to “Front/Center/Surround/Surround back
speaker and Subwoofer connection” and “Presence speaker
connection” for details on connecting speakers (
p. 17).
Assigning a speaker configuration
A speaker configuration must be assigned to this unit to activate the
speakers. Use the “Power Amp Assign” function to easily apply the
appropriate speaker settings to this unit according to the speaker
configuration. Speakers for this layout can be activated at the
default “Power Amp Assign” setting (
p. 79).
Audio from a 7.1-channel audio source can be played back with
no degradation with this speaker configuration.
Speaker jacks FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
EXTRA SP jack No used
Front speaker L
Front speaker R
Subwoofer
Center speaker
Surround speaker L
Surround
speaker R
Surround back speaker RSurround back speaker L
30 cm or more
Power Amp Assign 7ch Normal (Default)
This unit automatically selects the presence speakers or
surround back speakers to output sounds according to the
selected sound program.
When the sound program is changed, the speakers that output
the sound are switched between the presence speakers and
surround back speakers automatically.
Front
speaker L
Front speaker R
Subwoofer
Center speaker
Surround speaker L
Surround
speaker R
Presence speaker R
Presence
speaker L
Surround back speaker RSurround back speaker L
30 cm or more
Speaker jacks FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
EXTRA SP jack Presence L/R speakers
Power Amp Assign 7ch Normal (Default)
Continues to the
next page
CONNECTIONS
Connecting speakers
En 15
Enjoying the 7.1 channel audio source
without surround back speakers
5.1-channel speaker layout
(5 speakers + subwoofer)
Connections of speakers
Connect the speakers to the following jacks according to the
speaker layout. Refer to “Front/Center/Surround/Surround back
speaker and Subwoofer connection” and “Presence speaker
connection” for details on connecting speakers (
p. 17).
Assigning a speaker configuration
A speaker configuration must be assigned to this unit to activate the
speakers. Use the “Power Amp Assign” function to easily apply the
appropriate speaker settings to this unit according to the speaker
configuration. Speakers for this layout can be activated at the
default “Power Amp Assign” setting (
p. 79).
Using the front speakers that support bi-
amp connections for a high quality sound
5-channel speaker layout
(Front speakers (Bi-amp) + 3 speakers)
Connections of speakers
Connect the speakers to the following jacks according to the
speaker layout. Refer to “Front/Center/Surround/Surround back
speaker and Subwoofer connection” and “Bi-amp connection” for
details on connecting speakers (
p. 17, p. 18).
Assigning a speaker configuration
Use the “Power Amp Assign” function which can easily apply the
appropriate speaker settings to this unit according to the speaker
configuration (
p. 79).
This unit can mix 7.1-channel audio source down to 5.1-channel
sound. This enables 7.1-channel sound without surround back
speakers.
Speaker jacks FRONT L/R, CENTER, SURROUND L/R,
SUBWOOFER
EXTRA SP jack No used
Front speaker L
Front speaker R
Subwoofer
Center speaker
Surround speaker L
Surround
speaker R
Power Amp Assign 7ch Normal (Default)
Using the front speakers that support bi-amp connections
reproduces a high quality sound.
Front speaker L
(Bi-amp connection)
Front speaker R
(Bi-amp connection)
Center speaker
Surround speaker L
Surround
speaker R
Subwoofer
Speaker jacks FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
EXTRA SP jack No used
Power Amp Assign 5ch BI-AMP
Continues to the
next page
CONNECTIONS
Connecting speakers
En 16
Using speakers in two rooms (Zone2
function)
7.1-channel speaker layout + Zone2
(7 speakers (in main zone) + subwoofer (in main
zone) + front speakers (in secondary zone))
Main zone
Zone2
Connections of speakers
Connect the speakers to the following jacks according to the
speaker layout. Refer to “Front/Center/Surround/Surround back
speaker and Subwoofer connection” and “Multi-zone audio system
using the internal amplifier of this unit” for details on connecting
speakers (
p. 17, p. 18).
Assigning a speaker configuration
Use the “Power Amp Assign” function which can easily apply the
appropriate speaker settings to this unit according to the speaker
configuration (
p. 79).
Front speaker L
Front speaker R
Center speaker
Subwoofer
Surround
speaker R
Surround speaker L
Surround back speaker L Surround back speaker R
30 cm or more
Front
speaker R
Front speaker L
In addition to the main room, speakers in another room can also
be controlled.
When the built-in amplifier for the speakers in another room is
turned on, the speakers that output the sound are switched from
the surround back speakers to the speakers in another room
automatically. J1
Speaker jacks FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
EXTRA SP jack Zone2 speakers
Power Amp Assign 7ch + 1ZONE
J
1 : Sound cannot be output from both the surround back speakers and the speakers
in the second zone at the same time.
CONNECTIONS
Connecting speakers
En 17
Connecting speakers and subwoofer
Connect your speakers to their respective terminals on the rear panel.
Front/Center/Surround/Surround back speaker and
Subwoofer connection
Presence speaker connection
When using the presence speakers, connect the speakers to the
EXTRA SP jacks as shown in the diagram below.
The presence speakers (PL/PR) that output front effect sounds can
be connected to this unit. With the sound programs (
p. 45),
sound with a richer and more spatial presence can be created.
CAUTION
Remove the AC power cable of this unit from the power outlet before connecting the speakers.
Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”
(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.
Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP
WIRES!” will appear on the front panel display when this unit is switched on.
CENTER
SURROUND SURROUND
BACK/BI-AMP
SINGLE
FRONT
1
SPEAKERS
TI CH INPUT
HDMI
2
HDMI
3
HDMI
4
HDMI
5
SU
BW
OO
FE
R
S
UR.BA
C
K
ND
G
ER
O
U
T
+12V
0.1A MAX.
CENTE
R
MO
TE
A
U
DI
O
OU
T
ZO
NE2
OUT
S
URR
O
UN
D
S
UR.BA
C
K
P
RE
O
UT
OO
FER
2
F
R
O
N
T
C
ENTE
R
SINGL
E
SubwooferCenter speaker
Front speaker Surround
speaker
Surround back
speaker
RL
RL RL
DOCK
OPTICAL
(
TV
)
A
V
3
A
V
1
A
V
2
A
V
4
A
V
5
A
V
6
A
U
D
I
O
1
A
U
D
I
O
2
M
U
LT
I C
H
IN
P
U
T
COAXIAL
(
CD
)
COAXIAL
OPTICAL
VIDEO
HDMI 1
(
BD/DVD
)
HDMI 2 HDMI 3
HDMI 4 HDMI 5
CENTER
SURROUND SURROUND
BACK/BI-AMP
SINGLE
EXTRA SP
ZONE2/
PRESENCE
FRONT
COMPONENT
VIDEO
P
R
P
B
Y
HDMI
OUT
AV
OUT
SUBWOOFER
SUR.BACK
SURROUND
TRIGGER OUT
+12V
0.1A MAX.
FRONT
CENTER
ARC
IN
REMOTE
OUT
COMPONENT
VIDEO
VIDEO
MONITOR OUT
P
R
P
B
Y
AUDIO
OUT
ZONE2
OUT
SURROUND
SUR.BACK
PRE OUT
SUBWOOFER
1
2
FRONT
CENTERSINGLE
ANTENNA
FM
GND
AM
75
PHONO
GND
S VIDEO
ANTENNA
FM
GND
AM
75
SPEAKERS
MAINS
EXTRA SP
ZONE2/
PRESENCE
Presence
speaker R
Presence
speaker L
Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
Although you can connect both surround back speakers and
presence speakers to this unit, you cannot output sounds from
those speakers at the same time.
0.5 – 1 m 0.5 – 1 m
PL PR
FL FR
1.8 m 1.8 m
Continues to the
next page
CONNECTIONS
Connecting speakers
En 18
Bi-amp connection
This unit can be connected to speakers that support bi-amp
connections. When connecting speakers, connect the FRONT jacks
and the SURROUND BACK/BI-AMP jacks as in the diagram
below. Configure the bi-amp settings to activate connections.
Multi-zone audio system using the internal
amplifier of this unit
Connect the speakers in the second zone to the EXTRA SP jacks as
in the diagram below.
Changing speaker impedance
This unit is configured for 8 Ω speakers at the factory setting.
When connecting to 6 Ω speakers, carry out the following
procedure to switch to 6 Ω. When this unit is configured for 6 Ω
speakers, 4 Ω speakers can also be used as the front speakers.
1
Switch this unit to the standby mode.
2
Press MAIN ZONE A while pressing and holding
STRAIGHT on the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately a few seconds, the top menu item is
displayed. J1
NOTES
Before making bi-amplification connections, remove any
brackets or cables that connect a woofer with a tweeter. Refer to
the instruction manuals of speakers for details. When not making
bi-amplification connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
If connecting a bi-amp, then surround back speakers cannot be
used.
FRONT
SURROUND
BACK/BI-AMP
SINGLE
CAUTION
The EXTRA SP jacks of this unit should not be connected to a
Passive Loudspeaker Selector Box or more than one loudspeaker
per channel.
Connection to a Passive Loudspeaker Selector Box or multiple
speakers per channel could create an abnormally low impedance
load resulting in amplifier damage. See this owner’s manual for
correct usage.
Compliance with minimum speaker impedance information for all
channels must be maintained at all times. This information is found
on the back panel of this unit.
DOCK
OPTICAL
(
TV
)
A
V
3
A
V
1
A
V
2
A
V
4
A
V
5
A
V
6
AUDIO 1
AUDIO 2
M
U
L
T
I
C
H
I
N
P
U
T
COAXIAL
(
CD
)
COAXIAL
OPTICAL
VIDEO
HDMI 1
(
BD/DVD
)
HDMI 2 HDMI 3
HDMI 4 HDMI 5
CENTER
SURROUND SURROUND
BACK/BI-AMP
SINGLE
EXTRA SP
ZONE2/
PRESENCE
FRONT
COMPONENT
VIDEO
P
R
P
B
Y
HDMI
OUT
AV
OUT
SUBWOOFER
SUR.BACK
SURROUND
TRIGGER OUT
+12V
0.1A MAX.
FRONT
CENTER
ARC
IN
REMOTE
OUT
COMPONENT
VIDEO
VIDEO
MONITOR OUT
P
R
P
B
Y
AUDIO
OUT
ZONE2
OUT
SURROUND
SUR.BACK
PRE OUT
SUBWOOFER
1
2
FRONT
CENTERSINGLE
ANTENNA
FM
GND
AM
75
PHONO
GND
S VIDEO
ANTENNA
FM
GND
AM
75
SPEAKERS
MAINS
EXTRA SP
ZONE2/
PRESENCE
Zone2
PHONES
SILENT
CINEMA
TONE
CONTROL
STRAIGHT
TV
BD
DVD
CD
RADIO
INPUT
PROGRAM
SCENE
INFO
MEMORY
PRESET
YPAO MIC
FM AM
H
ZONE2 ZONE CONTROL
MAIN ZONE
MAIN ZONE A
STRAIGHT
Continues to the
next page
J
1 : Refer to the “Extended functionality that can be configured as needed
(Advanced Setup menu)” (
p. 94) for details on the Advanced Setup menu.
CONNECTIONS
Connecting speakers
En 19
3
Check that “SP IMP.” is displayed on the front panel.
4
Press STRAIGHT repeatedly to select a “6ΩMIN.
5
Switch this unit to the standby mode, and then
switch it on again.
The power turns on, when the settings you made has been
configured.
Connecting speakers
This type of jack can connect to the following speakers or
connection.
1
Remove approximately 10 mm of insulation from the
ends of the speaker cables, and twist the bare wires
of the cables together firmly so that they will not
cause short circuits.
2
Loosen the speaker terminals.
3
Insert the bare wire of the speaker cable into the gap
on the side of the terminal.
4
Tighten the terminal.
Connecting extra speakers
The EXTRA SP jacks can connect to the following speakers.
1
Press down the tab and insert the bare end of the
speaker cable into the hole in the terminal.
2
Release the tab to secure the wire.
SPIMP.-8MIN
Front L/R speakers
Center speaker
Surround L/R speakers
Surround back L/R speakers
Bi-amp connection (Front speaker L/R speakers)
FRONT
2
2
3
1
4
4
Presence L/R speakers
Zone2 speakers
E
X
ZO
PR
Red: positive (+)
Black: negative (–)
CONNECTIONS
Connecting speakers
En 20
Connecting the subwoofer
1
Connect the subwoofer input jack to the
SUBWOOFER 1 or 2 jack on this unit with an audio
pin cable.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
NOTE
After connection, applying this setting to this unit is required to
activate all speaker connections. With using “Power Amp
Assign” function, you can easily apply the speaker
configuration.
Refer to “Power Amp Assign” (
p. 79) for details on using
“Power Amp Assign” function.
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
Subwoofer examples
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125

Yamaha RX-V667 Инструкция по применению

Категория
Аудио-видео ресиверы
Тип
Инструкция по применению

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ