Yamaha RX-V667 Инструкция по применению

Owner’s Manual

AV Receiver English for Europe, Asia, Africa,

Oceania and Latin America

En 2

CONTENTS

INTRODUCTION

Features and capabilities ...................................................4

Using the TV OSD to operate the unit .............................5

View or modify content for the current input source

<Content window> ...........................................................5

Configuring settings for this unit

<ON SCREEN menu>......................................................5

Adjust settings for each input source

<OPTION menu> ............................................................. 6

About this manual............................................................. 7

Supplied accessories......................................................... 7

Part names and functions..................................................8

Front panel........................................................................8

Rear panel.........................................................................9

Front panel display .........................................................10

Remote control ...............................................................11

On-screen display ...........................................................12

CONNECTIONS

Connecting speakers ........................................................ 13

Speaker channels and functions...................................... 13

Speaker layout ................................................................ 14

Connecting speakers and subwoofer .............................. 17

Connecting external components....................................21

Cable plugs and jacks .....................................................21

Connecting a TV monitor...............................................22

Connecting BD/DVD players and other devices............25

Connecting game consoles .............................................29

Connecting a multi-format player

or an external decoder .................................................... 29

Connecting an external amplifier ................................... 30

Connecting a SCENE link

playback-compatible device ...........................................30

Using the Trigger function to link

external component power..............................................31

Connecting audio/video recording devices.....................31

Connecting the FM/AM antennas .................................. 32

Setting up the speaker parameters automatically

(YPAO).............................................................................. 33

PLAYBACK

Basic playback procedure ............................................... 40

Adjusting high/low-frequency sound (Tone control) ..... 40

Changing input settings with a single key

(SCENE function) ............................................................ 41

Registering input sources/sound program...................... 41

Enjoying the desired sound field effect.......................... 41

Selecting sound programs and sound decoders.............. 41

Sound programs.............................................................. 45

Configuring the settings of this unit

while viewing the TV screen ........................................... 47

Basic operations via the TV screen display ................... 47

Configuring settings specific to

an individual input source (OPTION menu)................. 49

OPTION menu display and setup................................... 49

OPTION menu ............................................................... 50

Confirming and operating input sources

from the Content window ............................................... 53

Displaying the Content window on the TV screen......... 53

Switching the display between the Now playing view

and the Content browse view ......................................... 53

FM/AM tuning ................................................................. 54

Selecting a frequency for reception (Normal tuning)..... 54

Radio Data System tuning

(U.K. and Europe models only) ..................................... 56

Confirming and operating the FM/AM tuner

from the Content window............................................... 58

Playing back tunes from your iPod™/iPhone™ ........... 60

Connecting the Yamaha iPod universal dock................. 60

Controlling an iPod™/iPhone™ .................................... 60

Playing iPod/iPhone from the menu screen

(Menu browse control) ................................................... 61

Operating basic playback functions

via the remote control (Simple remote control) ............. 63

Playing back iPod™/iPhone™

with wireless connection................................................ 63

Playing back tunes from Bluetooth™ components ...... 65

Connecting a Yamaha Bluetooth

wireless audio receiver................................................... 65

Pairing Bluetooth™ components ................................... 65

Using Bluetooth™ components ..................................... 66

En 3

SETUP

Configuring input sources (Input menu) .......................67

Configuring input sources ..............................................67

Input menu......................................................................68

Editing the SCENE function (SCENE menu) ...............71

Editing a scene................................................................ 71

SCENE menu..................................................................72

Setting sound program parameters

(Sound Program menu) ...................................................73

Editing sound programs..................................................73

CINEMA DSP parameters ............................................. 74

Parameters usable in certain sound programs ................76

Parameters usable in surround decoder .......................... 77

Setting various functions (Setup menu) .........................78

Operating the Setup menu ..............................................78

Setup menu .....................................................................79

Manages settings for speakers ........................................79

Setting the audio output function of this unit .................83

Setting this unit’s video output function.........................84

Setting HDMI functions .................................................85

Setting this unit’s multi-zone function ...........................87

Making the receiver easier to use ................................... 88

Language ........................................................................89

Confirming information of this unit

(Information menu) .........................................................90

Selecting information .....................................................90

Controlling other components

with the remote control.................................................... 91

Keys connecting external components ...........................91

Default remote control code settings..............................92

Registering remote control codes for

external component operations.......................................92

Resetting all remote control codes ................................. 93

Extended functionality that can be configured

as needed (Advanced Setup menu).................................94

Displaying/Setting the Advanced Setup menu ...............94

Setting the impedance of speakers .................................94

Avoiding crossing remote control signals

when using multiple Yamaha receivers .......................... 95

Changing TV format ...................................................... 95

Removing HDMI video output up-scaling limits........... 95

Changing FM/AM frequency steps

(Asia and General models only)..................................... 96

Initializing various settings for this unit......................... 96

Using the HDMI Control function ................................. 97

Using multi-zone configuration .................................... 100

Connecting Zone2 ........................................................ 100

Controlling Zone2 ........................................................ 101

APPENDIX

Troubleshooting ............................................................. 102

General ......................................................................... 102

HDMI™ ....................................................................... 104

Tuner (FM/AM) ........................................................... 105

iPod™/iPhone™ .......................................................... 106

Bluetooth™ .................................................................. 106

Remote control ............................................................. 107

Glossary .......................................................................... 108

Audio information ........................................................ 108

Sound program information ......................................... 109

Video information ........................................................ 109

Video conversion .......................................................... 110

Information on HDMI™............................................... 111

About trademarks.......................................................... 111

Specifications.................................................................. 112

Index ............................................................................... 114

En 4

INTRODUCTION

■ Built-in high-quality, high-power 7-channel amplifier

■ 6 HDMI input jacks (5 + 1 VIDEO AUX) supporting Audio Return Channel and 3D

video signal

■ 1-button input/sound program switching (SCENE function)................................41

■ Speaker connections for 2- to 7.1-channel configurations

– Speaker impedance configuration............................................................................................................18

– Speaker channels and functions ...............................................................................................................13

– Speaker layout..........................................................................................................................................14

– Speaker cable connection.........................................................................................................................17

– Subwoofer cable connection ....................................................................................................................20

– High quality playback using bi-amplification connections .....................................................................18

■ Automatic settings for speaker acoustic parameters

(YPAO - Yamaha Parametric Room Acoustic Optimizer) ......................................33

■ External component connection (max. 16 inputs) and playback

– External component connection...............................................................................................................21

– Protective cover for front panel jacks ........................................................................................................7

– Configuring the settings specific for each input source <OPTION menu>.............................................49

– Playback from external components........................................................................................................40

– Playback from an iPod/iPhone with wired connection............................................................................60

– Playback from an iPod/iPhone with wireless connection........................................................................63

– Playback from a Bluetooth component (Bluetooth and components sold separately) ............................65

■ FM/AM tuner

– Receiving an FM/AM broadcast..............................................................................................................54

– Presetting stations ....................................................................................................................................54

– Simple preset tuning ................................................................................................................................54

– (U.K. and Europe models) Radio Data System tuning ............................................................................56

– (U.K. and Europe models) Automatic traffic information reception.......................................................57

– Changing FM mode (Stereo/Mono).........................................................................................................58

– (Asia and General models only) Changing FM/AM frequency steps......................................................54

■ Multi-channel, multi-format playback

– Sound field effect selection......................................................................................................................41

– Playback without sound field effects .......................................................................................................42

– Stereo playback........................................................................................................................................42

– Compressed-music playback ...................................................................................................................44

■ Front panel information display/on-screen display (OSD) on the TV screen

– Switching information on the front panel display ...................................................................................10

– Operating this unit using the on-screen display.......................................................................................12

■ Volume adjustment functions

– Easy listening at low volumes < Adaptive DRC> ...................................................................................51

– Adjusting volume between input sources <Volume Trim> .....................................................................52

■ Remote control operation

– External component operation with this unit’s remote control................................................................91

– Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................95

■ Playing back the audio source in another room

– Using the internal amplifier for playback ................................................................................................18

– Using the external amplifier for playback .............................................................................................100

– Configuring the settings for another room.............................................................................................100

– Controlling the external component in another room............................................................................101

■ Other features

– Standby mode after a specific amount of time <Sleep timer>.................................................................11

– Charging the iPod/iPhone when this unit is in standby mode <iPod Standby Charge> ..........................69

Features and capabilities

Most of this unit’s functions can be operated by following instructions displayed on the TV screen.

Refer to “Using the TV OSD to operate the unit” on the following pages for information on

functions that can be controlled using the on-screen display.

INTRODUCTION

En 5

This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simplifies operations. The OSD mainly displays the ON SCREEN and

OPTION menus, as well as the Content window that displays the content of current input sources.

■ Select an input source, SCENE and sound program

– Select an input source ..............................................................................................................................47

– Select a SCENE .......................................................................................................................................48

– Select a sound program............................................................................................................................48

View or modify content for the current input source <Content

window>

■ Operate the AM/FM tuner

– Display a list of preset stations for selection ...........................................................................................59

– Display information on the station currently received.............................................................................58

– Perform operations such as searching for and registering stations using the Utility <Utility> ...............58

■ Display the list of iPod music sources

– Display the list of iPod music sources for selection ................................................................................61

– Perform operations such as play, stop and pause using the TV screen <Menu browse control> ............61

– Perform basic playback functions such as play, stop and pause

via the remote control <Simple remote control> .....................................................................................63

Configuring settings for this unit <ON SCREEN menu>

– Display the ON SCREEN menu on the TV screen..................................................................................47

■ Select and configure an input source

– Select an input source ..............................................................................................................................47

– Play the audio/video signal from the selected input source.....................................................................40

– Change the input source name <Rename/Icon Select> ...........................................................................68

– Select the audio input jack separately from the video input jack <Audio In>.........................................69

– Specify a format for digital audio signals <Decoder Mode>...................................................................69

– Enhance the sound of compressed audio <Enhancer>.............................................................................69

– Output a video signal input from another input source

while playing a multi-channel audio signal <Video Out> .......................................................................70

– Charge the iPod/iPhone when this unit is in standby mode <Standby Charge>......................................69

■ Select and configure a SCENE

– Select a SCENE .......................................................................................................................................48

– Register or clear settings for a selected SCENE <Save>, <Reset> .........................................................72

– Turn on a Yamaha BD/DVD player or CD player connected to this unit automatically

when a SCENE is selected <SCENE IR>................................................................................................72

■ Select and adjust a sound program (sound program)

– Select a sound program............................................................................................................................48

– Adjust sound program parameters ...........................................................................................................73

■ Display settings information for this unit

– Display audio signal information <Audio Signal>..................................................................................90

– Display video signal information <Video Signal> ..................................................................................90

– Display HDMI signal information <HDMI - Monitor Info.>..................................................................90

■ Adjust acoustic parameters to match your speakers and listening environment

– Specify speaker acoustic parameters automatically

(Yamaha Parametric Room Acoustic Optimizer - YPAO).......................................................................33

– Set up this unit’s speaker configuration simply <Power Amp Assign> ..................................................79

– Specify settings for each speaker <Configuration>.................................................................................80

– Control volume control for each speaker <Level> ..................................................................................81

– Apply speaker distance settings <Distance> ...........................................................................................81

– Control equalizer sound quality <Parametric EQ>..................................................................................82

– Adjust test tone speaker <Test Tone> ......................................................................................................82

■ Adjust audio signals output from this unit

– Correct lag between audio and video signals <Lipsync> ........................................................................83

– Select a dynamic range adjustment method <Dynamic Range> .............................................................83

– Specify the maximum volume <Max Volume> .......................................................................................83

– Specify the initial volume <Initial Volume>............................................................................................84

– Adjust DSP effect and volume level <Adaptive DSP Level>..................................................................84

■ Adjust video signals output from this unit

– Convert analog video signal to another type of signal <Analog to Analog Conversion> .......................84

– Specify the resolution and aspect ratio of analog video signal converted to HDMI or specify upscaling

resolution for 480i/576i- or 480p/576p-HDMI output signal <Processing> ...........................................85

Using the TV OSD to operate the unit

INTRODUCTION

Using the TV OSD to operate the unit

En 6

■ HDMI settings

– Assign the audio input source for the TV <TV Audio Input>.................................................................86

– Listen to TV audio with HDMI cable connection <ARC (Audio Return Channel)>..............................86

– Transmit HDMI audio/video to the TV during standby mode <Standby Through> ...............................87

– Change the output destination of HDMI input audio signals <Audio Output>.......................................87

■ Enable listening in multiple rooms (multi-zone function)

– Adjust Zone2 volume <Zone2 Set>.........................................................................................................87

■ Specify other functions for this unit

– Enter standby mode automatically when no operations are performed <Auto Power Down>................88

– Adjust the brightness of the front panel display <Dimmer> ...................................................................88

– Change the wall paper displayed on the TV screen <Wall Paper>..........................................................88

– Specify the function of the TRIGGER OUT jack for controlling external components

<Trigger Output> .....................................................................................................................................89

– Prohibit changes to settings <Memory Guard> .......................................................................................89

■ Select a language

– Change the language displayed on the TV screen <Language>..............................................................89

Adjust settings for each input source <OPTION menu>

– Display the OPTION menu on the TV screen .........................................................................................49

– Select the 5.1-channel signal playback method <Extended Surround>...................................................51

– Adjust bass and treble levels <Tone Control> .........................................................................................50

– Enable low-volume background music <Adaptive DRC>.......................................................................51

– Adjust the volume of input sources <Volume Trim>...............................................................................52

– (U.K. and Europe models) Automatically search for and receive a traffic station <Traffic Program> ...52

– Adjust the vertical position of dialogues <Dialogue Lift> ......................................................................51

INTRODUCTION

Using the TV OSD to operate the unit

En 7

About this manual

Supplied accessories

Check that you received all of the following parts.

• Remote control

• Batteries (AAA, R03, UM-4) x 2

• YPAO microphone

• AM loop antenna

• Indoor FM antenna

• VIDEO AUX input cover

• Some features are not available in certain regions.

• This manual is created prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the manual and

product, the product has priority.

• “

dHDMI1” (example) indicates the name of the parts on the

remote control. Refer to the “Remote control” (☞

p. 11) for the

information about each position of the parts.

• J

1 indicates that the reference is in the footnote. Refer to the

corresponding numbers on the bottom of the page.

• ☞

indicates the page describing the related information.

• Click on the “ ” at the bottom of the page to display the

corresponding page in “Part names and functions.”

Front panel

Rear panel

Front panel display

Remote control

■ Attaching the VIDEO AUX input cover (supplied)

To protect against dust, attach the supplied VIDEO AUX input

cover to the VIDEO AUX jacks when you do not use the jacks.

To remove the cover, push the left section of it.

Attach the cover

PUSH

Remove the cover

■ Installing batteries in the remote control

When inserting batteries in the remote control, remove the

battery compartment cover from the reverse side of the remote

control, and insert two AAA batteries into the battery

compartment so that they match with the polarity markings (+

and -).

Replace the batteries with new ones if the remote control can

only be operated within a narrow range.

NOTE

If there are remote control codes for external components

registered to the remote control, removing the batteries for more

than 2 minutes, or leaving exhausted batteries in the remote

control, may clear the remote control codes. If this should occur,

replace the batteries with new ones, and set the remote control

codes.

a

c

b

Battery compartment

cover

Battery compartment

INTRODUCTION

En 8

Front panel

a MAIN ZONE A (MAIN ZONE Power)

Switches this unit between on and standby mode.

b HDMI Through/iPod Charge indicator

Lights up in any of the following cases while the unit is in standby

mode.

• When the Standby Through function is enabled and audio/video

from an external component connected with HDMI is output to a TV

during standby mode (☞

p. 87).

• When an iPod/iPhone, which is placed in the Yamaha iPod universal

dock, is charging while the unit is in standby mode (☞

p. 63).

This indicator also lights up when the Yamaha iPod wireless receiver

is connected to this unit (☞

p. 63).

c YPAO MIC jack

Connect the supplied YPAO microphone and adjust the speaker balance

automatically (☞

p. 33).

d ZONE2

When this unit is connected to an external amplifier located in another

room, this key switches that amplifier between on and standby

(☞

p. 101).

When speakers in another room are connected to this unit, this key

switches the built-in amplifier for those speakers on and off

(☞

p. 101).

e ZONE CONTROL

Switches to Zone2 operation mode. This unit, or its remote control,

can be used to select input sources or adjust volume for an external

amplifier in another room or the built-in amplifier for speakers in

another room (☞

p. 101).

f INFO

Changes the information displayed on the front panel display

(☞

p. 10).

g MEMORY

Registers FM/AM stations as preset stations (☞

p. 55). J1

h PRESET j / i

Selects an FM/AM preset station (☞

p. 58). J1

i FM/AM

Sets the FM/AM tuner band to FM or AM (☞

p. 54). J1

j Front panel display

Displays information on this unit (☞

p. 10).

k TUNING jj / ii

Changes FM/AM tuner frequencies (☞

p. 54). J1

l PURE DIRECT

Switches this unit to Pure Direct mode (☞

p. 44).

m PHONES jack

For plugging headphones in. Sound effects applied during playback

can also be heard through the headphones.

n INPUT l / h

Selects an input source from which to playback. Press either the left or

right key repeatedly to cycle through the input sources in order.

o SCENE

Switches the input source and the sound program with a single button

(☞

p. 41). When this unit is in standby mode, press this key to switch

on.

p TONE CONTROL

Adjusts high-frequency/low-frequency output of speakers/headphones

(☞

p. 40).

q PROGRAM l / h

Selects a sound program (☞

p. 41). Press the left or right key

repeatedly to cycle through sound programs.

r STRAIGHT

Changes a sound program to straight decoding mode (☞

p. 42).

s VIDEO AUX jacks

For connecting game consoles to this unit temporarily (☞

p. 29).

Attach the supplied VIDEO AUX input cover when not using this jack

(☞

p. 7).

t VOLUME

Adjusts the volume level.

Part names and functions

VIDEO

AUX

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

VOLUME

TV

BD

DVD

CD

RADIO

INPUT

PROGRAM

SCENE

VIDEO

AUDI OLR

INFO

MEMORY

PRESET

TUNING

YPAO MIC

PURE DIRECT

FM AM

HDMI IN

ZONE2 ZONE CONTROL

MAIN ZONE

p rn q

a

omt

c

s

jd g h lfe i kb

J

1 : Usable when you have selected TUNER input.

INTRODUCTION

Part names and functions

En 9

Rear panel

a DOCK jack

For connecting an optional Yamaha iPod universal dock (such as

YDS-12), iPod wireless receiver (YID-W10), or Bluetooth wireless

audio receiver (YBA-10) (☞

p. 60, p. 63, p. 65).

b PHONO jacks

For connecting a turntable (☞

p. 28).

c HDMI OUT jack

For connecting an HDMI - compatible TV to output audio/video

signals (☞

p. 23).

d ANTENNA jacks

For connecting AM and FM antennas (☞

p. 32).

e MONITOR OUT jacks

f REMOTE IN/OUT jacks

For connecting an external component that supports the remote

control function (☞

p. 30).

g HDMI1-5 jacks

For connecting external components equipped with HDMI-

compatible outputs to receive audio/video signals (☞

p. 25).

h SPEAKERS terminals

For connecting the front, center, surround and surround back speakers

(☞

p. 17). Connect the presence speakers (☞p. 17) or the speakers for

Zone2 (☞

p. 18) to the EXTRA SP jacks.

i VOLTAGE SELECTOR

(Asia and General models only)

Select the switch position according to your local voltage (Refer to

Quick Reference Guide).

j Power cable

For connecting this unit to an AC wall outlet.

k AV1-6 jacks

For connecting to external components equipped with audio/video

outputs to receive audio/video signals (☞

p. 26).

l AV OUT jacks

For outputting audio/video signals received when analog inputs (AV3-

6 or AUDIO1-2) are selected (☞

p. 31).

m AUDIO1-2 jacks

For connecting external components equipped with analog audio

outputs to input sound into this unit (☞

p. 28).

n TRIGGER OUT jack

For connecting an external component that supports the trigger

function to operate it linked with operation of this unit (☞

p. 31).

o MULTI CH INPUT jacks

For connecting a player that supports a multi-channel output

(☞

p. 29).

p AUDIO OUT jacks

For outputting audio signals received when analog jacks, such as the

AV5-6 or AUDIO1-2 are selected (☞

p. 31).

q ZONE2 OUT jacks

Outputs sound of this unit to an external amplifier set in a different

room. (☞

p. 100).

r PRE OUT terminals

For connecting a subwoofer with built-in amplifier or an external

power amplifier (☞

p. 20, p. 30).

VIDEO jack For connecting a TV capable of receiving video

input, and outputting video signals to it (☞p. 23).

COMPONENT

VIDEO jacks

For connecting TV that are compatible with

component video signals, using three cables to

output video signal (☞p. 23).

HDMI

OUT

AV

OUT

ARC

COMPONENT

VIDEO

MONITOR OUT

P

R

P

B

Y

AUDIO

OUT

ZONE2

OUT

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

1

2

FRONT

CENTERSINGLE

(

TV

)

AV 4

AV 5

AV 6

AUD

IO 1

AUD

IO 2

M

U

L

T

I C

H

IN

P

U

T

O

PTI

C

AL

HDMI 1

(

B

D/DVD

)

HDMI 2

H

DMI

3

HDMI

4

HDMI

5

C

ENTER

SU

RR

OU

ND

SU

RR

OU

N

D

BA

C

K

/

BI-AM

P

S

IN

G

L

E

FR

O

N

T

S

UBW

OO

FER

SUR.BACK

S

URROUN

D

T

RIGGER OUT

+12

V

0

.1A MAX

.

FRON

T

C

ENTER

IN

REMOTE

OUT

G

ND

S

VIDE

O

ANTENNA

FM

G

ND

GND

AM

75

S

PEAKERS

Distinguishing the input and output jacks

The area around the audio/video output jacks is marked

in white to prevent connection errors. Use these jacks to

output audio/video signals to a TV or other external

component.

Output jacks

DOCK

OPTICAL

(

TV

)

AV 3

AV 1

AV 2

AV 4

AV 5

AV 6

AUDIO 1

AUDI O 2

M

U

LTI C

H

IN

P

U

T

COAXIAL

(

CD

)

COAXIAL

OPTICAL

VIDEO

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4 HDMI 5

CENTER

SURROUND SURROUND

BACK/BI-AMP

SINGLE

EXTRA SP

ZONE2/

PRESENCE

FRONT

COMPONENT

VIDEO

P

R

P

B

Y

HDMI

OUT

AV

OUT

SUBWOOFER

SUR.BACK

SURROUND

TRIGGER OUT

+12V

0.1A MAX.

FRONT

CENTER

ARC

IN

REMOTE

OUT

COMPONENT

VIDEO

MONITOR OUT

P

R

P

B

Y

AUDI O

OUT

ZONE2

OUT

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

1

2

FRONT

CENTERSINGLE

ANTENNA

FM

GND

AM

75

PHONO

GND

S VIDEO

ANTENNA

FM

GND

AM

75

SPEAKERS

MAINS

pq

aecbgd h

klm

j

o rn

f

i

(Ex: U.K. and Europe models)

INTRODUCTION

Part names and functions

En 10

Front panel display

a HDMI indicator

Lights up during normal HDMI communication when any of the

HDMI1-5 inputs are selected.

b CINEMA DSP indicator

Lights up when a sound field effect that uses CINEMA DSP

technology is selected.

c ENHANCER indicator

Lights up when the Compressed Music Enhancer mode is turned on

(☞

p. 44).

d CINEMA DSP 3D indicator

Lights up when CINEMA DSP 3D is activated (☞

p. 43).

e Tuner indicator

Light up according to the status of a received station (☞

p. 54).

f SLEEP indicator

Lights up when the sleep timer is on (☞

p. 11).

g ZONE2 indicator

Lights up when the audio output to Zone2 is enabled (☞

p. 101).

h MUTE indicator

Flashes when audio is muted.

i VOLUME indicator

Displays the current volume level.

j Cursor indicators

Light up if corresponding cursors on the remote control are available

for operations.

k Multi information display

Displays a range of information on menu items and settings.

l Speaker indicators

Indicate speaker terminals from which signals are output.

SW

C

LR

SL SR

SBL SBRSB

PR

PL

Front speaker L

Surround speaker L

Subwoofer

Front speaker R

Surround speaker R

Center speaker

Surround back

speaker L

Surround back

speaker R

Surround back

speaker J1

Presence speaker L

Presence speaker

R

■ Switching information on the front panel display

The front panel can display sound programs and surround

decoder names as well as the active input source.

Press fINFO repeatedly to cycle through input source J2 →

sound program → surround decoder in order.

SWSW

C

LR

SL SR

SBL SBR

Standard

MOVIE

VOL.

Input source name

Sound program (DSP program)

STEREO

SLEEP

VOL.

TUNED

SW

C

LR

SL SR

MUTE

ENHANCER

3

ZONE

2

SBL SBRSB

PR

PL

jk lj

abcdefihg

J

1 : “SB” is displayed when using a 6.1-channel configuration only.

J

2 : During FM/AM reception, the frequency is displayed instead of the input source.

INTRODUCTION

Part names and functions

En 11

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b MAIN/ZONE2

Switches the zone to be operated by the remote control between the

Main zone and Zone2 (☞

p. 101).

c SOURCE A (SOURCE Power)

Switches an external component on and off.

d Input selector

Select an input source on this unit from which to playback.

e Radio control keys

Operates the FM/AM tuner. These keys are used when using the tuner

input.

f INFO

Cycles the information displayed on the front panel display (the name

of the currently selected input source, the sound program, the

surround decoder, the FM/AM tuner frequency, etc.).

g Sound selection keys

Switch between the sound field effect (sound program) you are using

and the surround decoder (☞

p. 41).

h SLEEP

Switches this unit to standby mode automatically after a specified

period of time has elapsed (sleep timer). Press this key repeatedly to

set the time for the sleep timer function.

The SLEEP indicator lights up when the sleep timer is on.

i SCENE

Switch the input source and the sound program with a single button

(☞

p. 41). When this unit is in standby mode, press this key to switch on.

j ON SCREEN

Turns on and off the ON SCREEN menu.

k Cursor B / C / D / E, ENTER, RETURN

l External component operation keys

Operate recording, playback, and menu displays etc. for external

components (☞

p. 91). J1

m Numeric keys

Enter numbers.

n TV control keys

Operate a monitor such as a TV.

o CODE SET

Sets remote control codes for external component operations

(☞

p. 92).

p RECEIVER A (RECEIVER Power)

Switches this unit between on and standby mode.

q SOURCE/RECEIVER

Switches remote control key function to operate this unit or an

external component (☞

p. 91). Operate an external component when

this key glows green, or this unit when this key glows orange.

r OPTION

Turns on and off the OPTION menu (☞

p. 49).

s VOLUME +/-

Adjust the volume level (☞

p. 40).

t MUTE

Turns the mute function of the sound output on and off (☞

p. 40).

SCENE

RETURN

VOLUME

ENHANCER

SUR. DECODE

STRAIGHTSLEEP PURE DIRECT

HDMI

AV

AUDIO

1234

125

V-AU X

FM

INFO

MEMORY

AM

PRESET

MOVIE MUSIC

BD

DVD

TV

CD

RADIO

MUTE

ENTER

7 856

90

10

1234

REC

ENT

TV

TV VOL TV CH

TOP

MENU

POP-UP

MENU

DISPLAY

SOURCE

MAIN

ZONE 2

CODE SET

INPUT

MUTE

DOCK

MULTI

OPTION

ON SCREEN

5

1234

6

RECEIVER

PHONO

TUNER

TUNING

a

c

b

q

d

e

i

h

j

r

s

t

m

n

o

k

f

l

g

p

HDMI1-5 HDMI1-5 jacks

V-AUX Front panel VIDEO AUX jacks

AUDIO1-2 AUDIO1-2 jacks

AV1-6 AV1-6 jacks

MULTI CH INPUT MULTI CH INPUT jacks

DOCK A Yamaha iPod universal dock, iPod wireless

receiver, or Bluetooth wireless audio receiver

connected to the DOCK jack.

TUNER FM/AM tuner

PHONO PHONO jacks

FM Sets the FM/AM tuner band to FM.

AM Sets the FM/AM tuner band to AM.

MEMORY Presets radio stations.

PRESET F / G Selects a preset station.

TUNING H / I Changes tuning frequencies.

Cursor B / C / D / E Select menu items and change settings when

menus, etc, are displayed.

ENTER Confirms a selected item.

RETURN Returns to the previous screen when menus are

displayed, or close the menu.

Sleep 120min. Sleep 90min.

Sleep 60min.Sleep 30min.Sleep Off

J

1 : You can use lExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input

in advance if you want to operate external components (☞

p. 92).

INTRODUCTION

Part names and functions

En 12

On-screen display

When a TV is connected to this unit, the supplied remote control can be used to specify and verify this

unit’s settings via menus and options displayed on the TV screen.

The following displays are available in the on-screen display.

■ Displaying the following menus or viewing the current status of this unit on the

TV screen

• ON SCREEN menu

Press ON SCREEN to display the ON SCREEN menu.

• OPTION menu

Press OPTION to display the OPTION menu.

• Content window

Press Input selector to display the Content window.

ON SCREEN menu

Detailed settings for this unit can be

configured. Use this menu to select desired

settings, change their values, or check the

current status of this unit.

Refer to “SETUP” (☞

p. 67) for details.

OPTION menu

Configure the optional settings for each input

source. Settings such as “Tone Control” and

“Volume Trim” are applied to this unit

regardless of the input source.

Refer to “Configuring settings specific to an

individual input source (OPTION menu)”

(☞

p. 49) for details.

Content window

Includes the Content browse view and the

Now playing view. The Now playing view

displays the status of the source from which

music is currently played back. Adjust

settings for music content from the Content

browse view.

Refer to “Confirming and operating input

sources from the Content window” (☞

p. 53)

for details.

En 13

CONNECTIONS

This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and

connections in your listening environment.

Speaker channels and functions

■

Front left and right speakers

The front speakers are used for the front channel sounds (stereo

sound) and effect sounds.

Front speaker layout:

Place these speakers at an equal distance from the ideal listening

position in the front of the room. When using a projector screen,

the appropriate top positions of the speakers are about 1/4 of the

screen from the bottom.

■

Center speaker

The center speaker is for the center channel sounds (dialog, vocals,

etc.).

Center speaker layout:

Place it halfway between the left and right front speakers. When

using a TV, place the speaker just above or just under the center of

the TV with the front surfaces of the TV and the speaker aligned.

When using a screen, place it just under the center of the screen.

■

Surround left and right speakers

The surround speakers are for effect and vocal sounds with the 5.1-

channel speakers providing rear-area sounds. When used with 6.1/

7.1-channel (including surround back channel), sound for right and

left rear-area is output.

Surround speaker layout:

Place the speakers at the rear of the room on the left and right sides

facing the listening position. They should be placed between 60

degrees and 80 degrees from the listening position and with the

speaker tops at a height of 1.5 – 1.8 m from the floor.

■

Presence left and right speakers

The presence speakers are used for front effect sounds. When used

in combination with the sound programs (☞

p. 41), a sound with a

richer and more spatial presence is possible.

Presence speaker layout:

Place the left and right presence speakers 0.5 – 1 m to the outside

of the left and right front speakers respectively. The tops of the

presence speakers should be 1.8 m above the floor.

■

Surround back left and right speakers

Outputs the rear effect. When used with 6.1ch sound, sound from

the left and right sound surround back speakers is mixed and output

from a single speaker. When used with 5.1ch sound, sound from

surround back speakers is distributed between the left and right

surround speakers.

Surround back speaker layout:

When used with 7.1ch sound, arrange the left and right speakers

towards the listening position, to the rear of the listening position.

Arrange the left and right speakers at least 30 cm apart. The same

separation as with the front left and right speakers is optimum.

When used with 6.1ch sound, arrange these to the rear of the

listening position.

■

Subwoofer

The subwoofer speaker is used for bass sounds and low-frequency

effect (LFE) sounds included in Dolby Digital and DTS. Use a

subwoofer that is equipped with built-in amplifier.

Subwoofer speaker layout:

Place it to the outside of the front left and right speakers facing

slightly inward to reduce echoes from the wall.

Connecting speakers

Ex.

CONNECTIONS

Connecting speakers

En 14

Speaker layout

■

Enjoying the 7.1 channel audio source

■ 7.1-channel speaker layout

(7 speakers + subwoofer)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Presence speaker

connection” for details on connecting speakers (☞

p. 17).

■ Assigning a speaker configuration

A speaker configuration must be assigned to this unit to activate the

speakers. Use the “Power Amp Assign” function to easily apply the

appropriate speaker settings to this unit according to the speaker

configuration. Speakers for this layout can be activated at the

default “Power Amp Assign” setting (☞

p. 79).

■

Adding the presence speakers for a richer

sound field effect

■ Presence speaker layout

(7 speakers + subwoofer + presence speakers)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Presence speaker

connection” for details on connecting speakers (☞

p. 17).

■ Assigning a speaker configuration

A speaker configuration must be assigned to this unit to activate the

speakers. Use the “Power Amp Assign” function to easily apply the

appropriate speaker settings to this unit according to the speaker

configuration. Speakers for this layout can be activated at the

default “Power Amp Assign” setting (☞

p. 79).

Audio from a 7.1-channel audio source can be played back with

no degradation with this speaker configuration.

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack No used

Front speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Surround back speaker RSurround back speaker L

30 cm or more

Power Amp Assign 7ch Normal (Default)

This unit automatically selects the presence speakers or

surround back speakers to output sounds according to the

selected sound program.

When the sound program is changed, the speakers that output

the sound are switched between the presence speakers and

surround back speakers automatically.

Front

speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Presence speaker R

Presence

speaker L

Surround back speaker RSurround back speaker L

30 cm or more

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack Presence L/R speakers

Power Amp Assign 7ch Normal (Default)

Continues to the

CONNECTIONS

Connecting speakers

En 15

■

Enjoying the 7.1 channel audio source

without surround back speakers

■ 5.1-channel speaker layout

(5 speakers + subwoofer)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Presence speaker

connection” for details on connecting speakers (☞

p. 17).

■ Assigning a speaker configuration

A speaker configuration must be assigned to this unit to activate the

speakers. Use the “Power Amp Assign” function to easily apply the

appropriate speaker settings to this unit according to the speaker

configuration. Speakers for this layout can be activated at the

default “Power Amp Assign” setting (☞

p. 79).

■

Using the front speakers that support bi-

amp connections for a high quality sound

■ 5-channel speaker layout

(Front speakers (Bi-amp) + 3 speakers)

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Bi-amp connection” for

details on connecting speakers (☞

p. 17, p. 18).

■ Assigning a speaker configuration

Use the “Power Amp Assign” function which can easily apply the

appropriate speaker settings to this unit according to the speaker

configuration (☞

p. 79).

This unit can mix 7.1-channel audio source down to 5.1-channel

sound. This enables 7.1-channel sound without surround back

speakers.

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SUBWOOFER

EXTRA SP jack No used

Front speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Power Amp Assign 7ch Normal (Default)

Using the front speakers that support bi-amp connections

reproduces a high quality sound.

Front speaker L

(Bi-amp connection)

Front speaker R

(Bi-amp connection)

Center speaker

Surround speaker L

Surround

speaker R

Subwoofer

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack No used

Power Amp Assign 5ch BI-AMP

Continues to the

CONNECTIONS

Connecting speakers

En 16

■

Using speakers in two rooms (Zone2

function)

■ 7.1-channel speaker layout + Zone2

(7 speakers (in main zone) + subwoofer (in main

zone) + front speakers (in secondary zone))

Main zone

Zone2

■ Connections of speakers

Connect the speakers to the following jacks according to the

speaker layout. Refer to “Front/Center/Surround/Surround back

speaker and Subwoofer connection” and “Multi-zone audio system

using the internal amplifier of this unit” for details on connecting

speakers (☞

p. 17, p. 18).

■ Assigning a speaker configuration

Use the “Power Amp Assign” function which can easily apply the

appropriate speaker settings to this unit according to the speaker

configuration (☞

p. 79).

Front speaker L

Front speaker R

Center speaker

Subwoofer

Surround

speaker R

Surround speaker L

Surround back speaker L Surround back speaker R

30 cm or more

Front

speaker R

Front speaker L

In addition to the main room, speakers in another room can also

be controlled.

When the built-in amplifier for the speakers in another room is

turned on, the speakers that output the sound are switched from

the surround back speakers to the speakers in another room

automatically. J1

Speaker jacks FRONT L/R, CENTER, SURROUND L/R,

SURROUND BACK L/R, SUBWOOFER

EXTRA SP jack Zone2 speakers

Power Amp Assign 7ch + 1ZONE

J

1 : Sound cannot be output from both the surround back speakers and the speakers

in the second zone at the same time.

CONNECTIONS

Connecting speakers

En 17

Connecting speakers and subwoofer

Connect your speakers to their respective terminals on the rear panel.

■ Front/Center/Surround/Surround back speaker and

Subwoofer connection

■ Presence speaker connection

When using the presence speakers, connect the speakers to the

EXTRA SP jacks as shown in the diagram below.

The presence speakers (PL/PR) that output front effect sounds can

be connected to this unit. With the sound programs (☞

p. 45),

sound with a richer and more spatial presence can be created.

CAUTION

• Remove the AC power cable of this unit from the power outlet before connecting the speakers.

• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”

(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.

• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP

WIRES!” will appear on the front panel display when this unit is switched on.

CENTER

SURROUND SURROUND

BACK/BI-AMP

SINGLE

FRONT

1

SPEAKERS

TI CH INPUT

HDMI

2

HDMI

3

HDMI

4

HDMI

5

SU

BW

OO

FE

R

S

UR.BA

C

K

ND

G

ER

O

U

T

+12V

0.1A MAX.

CENTE

R

MO

TE

A

U

DI

O

OU

T

ZO

NE2

OUT

S

URR

O

UN

D

S

UR.BA

C

K

P

RE

O

UT

OO

FER

2

F

R

O

N

T

C

ENTE

R

SINGL

E

SubwooferCenter speaker

Front speaker Surround

speaker

Surround back

speaker

RL

RL RL

DOCK

OPTICAL

(

TV

)

A

V

3

A

V

1

A

V

2

A

V

4

A

V

5

A

V

6

A

U

D

I

O

1

A

U

D

I

O

2

M

U

LT

I C

H

IN

P

U

T

COAXIAL

(

CD

)

COAXIAL

OPTICAL

VIDEO

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4 HDMI 5

CENTER

SURROUND SURROUND

BACK/BI-AMP

SINGLE

EXTRA SP

ZONE2/

PRESENCE

FRONT

COMPONENT

VIDEO

P

R

P

B

Y

HDMI

OUT

AV

OUT

SUBWOOFER

SUR.BACK

SURROUND

TRIGGER OUT

+12V

0.1A MAX.

FRONT

CENTER

ARC

IN

REMOTE

OUT

COMPONENT

VIDEO

MONITOR OUT

P

R

P

B

Y

AUDIO

OUT

ZONE2

OUT

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

1

2

FRONT

CENTERSINGLE

ANTENNA

FM

GND

AM

75

PHONO

GND

S VIDEO

ANTENNA

FM

GND

AM

75

SPEAKERS

MAINS

EXTRA SP

ZONE2/

PRESENCE

Presence

speaker R

Presence

speaker L

• Connection of presence speakers is recommended to take full

advantage of the effects of CINEMA DSP sound programs.

• Although you can connect both surround back speakers and

presence speakers to this unit, you cannot output sounds from

those speakers at the same time.

0.5 – 1 m 0.5 – 1 m

PL PR

FL FR

1.8 m 1.8 m

Continues to the

CONNECTIONS

Connecting speakers

En 18

■ Bi-amp connection

This unit can be connected to speakers that support bi-amp

connections. When connecting speakers, connect the FRONT jacks

and the SURROUND BACK/BI-AMP jacks as in the diagram

below. Configure the bi-amp settings to activate connections.

■ Multi-zone audio system using the internal

amplifier of this unit

Connect the speakers in the second zone to the EXTRA SP jacks as

in the diagram below.

■

Changing speaker impedance

This unit is configured for 8 Ω speakers at the factory setting.

When connecting to 6 Ω speakers, carry out the following

procedure to switch to 6 Ω. When this unit is configured for 6 Ω

speakers, 4 Ω speakers can also be used as the front speakers.

1

Switch this unit to the standby mode.

2

Press MAIN ZONE A while pressing and holding

STRAIGHT on the front panel.

Release the keys when “ADVANCED SETUP” is displayed on

the front panel display.

After approximately a few seconds, the top menu item is

displayed. J1

NOTES

• Before making bi-amplification connections, remove any

brackets or cables that connect a woofer with a tweeter. Refer to

the instruction manuals of speakers for details. When not making

bi-amplification connections, make sure that the brackets or

cables are connected before connecting the speaker cables.

• If connecting a bi-amp, then surround back speakers cannot be

used.

FRONT

SURROUND

BACK/BI-AMP

SINGLE

CAUTION

The EXTRA SP jacks of this unit should not be connected to a

Passive Loudspeaker Selector Box or more than one loudspeaker

per channel.

Connection to a Passive Loudspeaker Selector Box or multiple

speakers per channel could create an abnormally low impedance

load resulting in amplifier damage. See this owner’s manual for

correct usage.

Compliance with minimum speaker impedance information for all

channels must be maintained at all times. This information is found

on the back panel of this unit.

DOCK

OPTICAL

(

TV

)

A

V

3

A

V

1

A

V

2

A

V

4

A

V

5

A

V

6

AUDIO 1

AUDIO 2

M

U

L

T

I

C

H

I

N

P

U

T

COAXIAL

(

CD

)

COAXIAL

OPTICAL

VIDEO

HDMI 1

(

BD/DVD

)

HDMI 2 HDMI 3

HDMI 4 HDMI 5

CENTER

SURROUND SURROUND

BACK/BI-AMP

SINGLE

EXTRA SP

ZONE2/

PRESENCE

FRONT

COMPONENT

VIDEO

P

R

P

B

Y

HDMI

OUT

AV

OUT

SUBWOOFER

SUR.BACK

SURROUND

TRIGGER OUT

+12V

0.1A MAX.

FRONT

CENTER

ARC

IN

REMOTE

OUT

COMPONENT

VIDEO

MONITOR OUT

P

R

P

B

Y

AUDIO

OUT

ZONE2

OUT

SURROUND

SUR.BACK

PRE OUT

SUBWOOFER

1

2

FRONT

CENTERSINGLE

ANTENNA

FM

GND

AM

75

PHONO

GND

S VIDEO

ANTENNA

FM

GND

AM

75

SPEAKERS

MAINS

EXTRA SP

ZONE2/

PRESENCE

Zone2

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

TV

BD

DVD

CD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

YPAO MIC

FM AM

H

ZONE2 ZONE CONTROL

MAIN ZONE

MAIN ZONE A

STRAIGHT

Continues to the

1 : Refer to the “Extended functionality that can be configured as needed

(Advanced Setup menu)” (☞

p. 94) for details on the Advanced Setup menu.

CONNECTIONS

Connecting speakers

En 19

3

Check that “SP IMP.” is displayed on the front panel.

4

Press STRAIGHT repeatedly to select a “6ΩMIN.”

5

Switch this unit to the standby mode, and then

switch it on again.

The power turns on, when the settings you made has been

configured.

■

Connecting speakers

This type of jack can connect to the following speakers or

connection.

1

Remove approximately 10 mm of insulation from the

ends of the speaker cables, and twist the bare wires

of the cables together firmly so that they will not

cause short circuits.

2

Loosen the speaker terminals.

3

Insert the bare wire of the speaker cable into the gap

on the side of the terminal.

4

Tighten the terminal.

■

Connecting extra speakers

The EXTRA SP jacks can connect to the following speakers.

1

Press down the tab and insert the bare end of the

speaker cable into the hole in the terminal.

2

Release the tab to secure the wire.

SPIMP.-8MIN

• Front L/R speakers

• Center speaker

• Surround L/R speakers

• Surround back L/R speakers

• Bi-amp connection (Front speaker L/R speakers)

FRONT

2

3

1

4

• Presence L/R speakers

• Zone2 speakers

E

X

ZO

PR

Red: positive (+)

Black: negative (–)

CONNECTIONS

Connecting speakers

En 20

■

Connecting the subwoofer

1

Connect the subwoofer input jack to the

SUBWOOFER 1 or 2 jack on this unit with an audio

pin cable.

2

Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than

half).

Crossover frequency (if available): Set to maximum.

NOTE

After connection, applying this setting to this unit is required to

activate all speaker connections. With using “Power Amp

Assign” function, you can easily apply the speaker

configuration.

Refer to “Power Amp Assign” (☞

p. 79) for details on using

“Power Amp Assign” function.

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

Страница загружается...

Yamaha RX-V667 Инструкция по применению

Похожие модели бренда