Pioneer MVH-S100UBA Руководство пользователя

English Français Italiano Español Deutsch Nederlands Русский

DIGITAL MEDIA RECEIVER

RECEPTEUR NUMERIQUE MULTIMEDIA

RICEVITORE MULTIMEDIALE DIGITALE

RECEPTOR DIGITAL DE MEDIOS

DIGITALER MEDIA RECEIVER

DIGITALE MEDIA-RECEIVER

ЦИФРОВОЙ МЕДИАРЕСИВЕР

MVH-S100UI

MVH-S100UB

MVH-S100UBG

MVH-S100UBA

MVH-S100UBW

MVH-S010UB

Owner’s Manual

Mode d’emploi

Manuale d’istruzioni

Manual de instrucciones

Bedienungsanleitung

Handleiding

Руководство пользователя

2En

Before You Start ......................................................................... 3

Getting Started .......................................................................... 4

Radio ............................................................................................ 6

USB/iPod/AUX ............................................................................ 7

App Mode.................................................................................... 9

Spotify®........................................................................................ 9

Using Pioneer ARC APP........................................................... 10

Settings...................................................................................... 11

FUNCTION settings ............................................................... 11

AUDIO settings....................................................................... 12

SYSTEM settings .................................................................... 13

ILLUMINATION settings........................................................ 14

Connections/Installation........................................................ 15

Additional Information........................................................... 18

About this manual:

• In the following instructions, a USB memory or USB audio player are referred

to as “USB device”.

• In this manual, iPod and iPhone are referred to as “iPod”.

Table of Contents

Declaration of Conformity with regard to the Radio Equipment Directive 2014/53/EU

[*] MVH-S100UI, MVH-S100UB, MVH-S100UBG, MVH-S100UBA, MVH-S100UBW, MVH-S010UB

English:

Hereby, Pioneer declares that the radio

eq

uipment type [*] is in compliance with Directive

2014/53/EU.

The full text of the EU declaration of conformity is

availab

le at the following internet address: http://

www.pioneer-car.eu/compliance

Suomi:

Pioneer vakuuttaa, että radiolaitetyyppi [*] on

d

irektiivin 2014/53/EU mukainen.

EU-vaatimustenmukaisuusvakuutuksen

täy

simittainen teksti on saatavilla seuraavassa

internetosoitteessa: http://www.pioneer-car.eu/

compliance

Nederlands:

Hierbij verklaar ik, Pioneer, dat het type

r

adioapparatuur [*] conform is met Richtlijn 2014/

53/EU.

De volledige tekst van de EU-

c

onformiteitsverklaring kan worden

geraadpleegd op het volgende internetadres:

http://www.pioneer-car.eu/compliance

Français:

Le soussigné, Pioneer, déclare que l’équipement

ra

dioélectrique du type [*] est conforme à la

directive 2014/53/UE.

Le texte complet de la déclaration UE de

conf

ormité est disponible à l’adresse internet

suivante: http://www.pioneer-car.eu/compliance

Svenska:

Härmed försäkrar Pioneer att denna typ av

ra

dioutrustning [*] överensstämmer med direktiv

2014/53/EU.

Den fullständiga texten till EU-försäkran om

ö

verensstämmelse finns på följande webbadress:

http://www.pioneer-car.eu/compliance

Dansk:

Hermed erklærer Pioneer, at radioudstyrstypen [*]

er i

overensstemmelse med direktiv 2014/53/EU.

EU-overensstemmelseserklæringens fulde tekst

k

an findes på følgende internetadresse: http://

www.pioneer-car.eu/compliance

Deutsch:

Hiermit erklärt Pioneer, dass der Funkanlagentyp

[

*] der Richtlinie 2014/53/EU entspricht.

Der vollständige Text der EU-

K

onformitätserklärung ist unter der folgenden

Internetadresse verfügbar: http://www.pioneer-

car.eu/compliance

Ελληνικά:

Με την παρούσα ο/η Pioneer, δηλώνει ότι ο

ρ

αδιοεξοπλισμός [*] πληροί την οδηγία 2014/53/

ΕΕ.

Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ

δ

ιατίθεται στην ακόλουθη ιστοσελίδα στο

διαδίκτυο: http://www.pioneer-car.eu/

compliance

Italiano:

Il fabbricante, Pioneer, dichiara che il tipo di

ap

parecchiatura radio [*] è conforme alla direttiva

2014/53/UE.

Il testo completo della dichiarazione di conformità

UE

è disponibile al seguente indirizzo Internet:

http://www.pioneer-car.eu/compliance

Español:

Por la presente, Pioneer declara que el tipo de

eq

uipo radioeléctrico [*] es conforme con la

Directiva 2014/53/UE.

El texto completo de la declaración UE de

c

onformidad está disponible en la dirección

Internet siguiente: http://www.pioneer-car.eu/

compliance

Português:

O(a) abaixo assinado(a) Pioneer declara que o

p

resente tipo de equipamento de rádio [*] está

em conformidade com a Diretiva 2014/53/UE.

O texto integral da declaração de conformidade

e

stá disponível no seguinte endereço de Internet:

http://www.pioneer-car.eu/compliance

Čeština:

Tímto Pioneer prohlašuje, že typ rádiového

z

ařízení [*] je v souladu se směrnicí 2014/53/EU.

Manufacturer:

Pioneer Corporation

28-8, Honkomagome 2-chome,

Bunkyo-ku, Tokyo 113-0021, Japan

EU Representative’s & Importer:

Pioneer Europe NV

Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium

http://www.pioneer-car.eu

3En

English

Úplné znění EU prohlášení o shodě je k dispozici

na této internetové adrese: http://www.pioneer-

car.eu/compliance

Eesti:

Käesolevaga deklareerib Pioneer, et käesolev

r

aadioseadme tüüp [*] vastab direktiivi 2014/53/

EL nõuetele.

ELi vastavusdeklaratsiooni täielik tekst on

k

ättesaadav järgmisel internetiaadressil: http://

www.pioneer-car.eu/compliance

Magyar:

Pioneer igazolja, hogy a [*] típusú

r

ádióberendezés megfelel a 2014/53/EU

irányelvnek.

Az EU-megfelelőségi nyilatkozat teljes szövege

elérhet

ő a következő internetes címen: http://

www.pioneer-car.eu/compliance

Latviešu valoda:

Ar šo Pioneer deklarē, ka radioiekārta [*] atbilst

D

irektīvai 2014/53/ES.

Pilns ES atbilstības deklarācijas teksts ir pieejams

š

ādā interneta vietnē: http://www.pioneer-car.eu/

compliance

Lietuvių kalba:

Aš, Pioneer, patvirtinu, kad radijo įrenginių tipas

[

*] atitinka Direktyvą 2014/53/ES.

Visas ES atitikties deklaracijos tekstas prieinamas

šiuo

interneto adresu: http://www.pioneer-car.eu/

compliance

Malti:

B’dan, Pioneer, niddikjara li dan it-tip ta’ tagħmir

tar-

radju [*] huwa konformi mad-Direttiva 2014/

53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità tal-UE

huw

a disponibbli f’dan l-indirizz tal-Internet li ġej:

http://www.pioneer-car.eu/compliance

Slovenčina:

Pioneer týmto vyhlasuje, že rádiové zariadenie

t

ypu [*] je v súlade so smernicou 2014/53/EÚ.

Úplné EÚ vyhlásenie o zhode je k dispozícii na

tej

to internetovej adrese: http://www.pioneer-

car.eu/compliance

Slovenščina:

Pioneer potrjuje, da je tip radijske opreme [*]

s

kladen z Direktivo 2014/53/EU.

Celotno besedilo izjave EU o skladnosti je na voljo

na

naslednjem spletnem naslovu: http://

www.pioneer-car.eu/compliance

Română:

Prin prezenta, Pioneer declară că tipul de

e

chipamente radio [*] este în conformitate cu

Directiva 2014/53/UE.

Textul integral al declarației UE de conformitate

es

te disponibil la următoarea adresă internet:

http://www.pioneer-car.eu/compliance

български:

С настоящото Pioneer декларира, че този тип

ра

диосъоръжение [*] е в съответствие с

Директива 2014/53/ЕС.

Цялостният текст на ЕС декларацията за

с

ъответствие може да се намери на следния

интернет адрес: http://www.pioneer-car.eu/

compliance

Polski:

Pioneer niniejszym oświadcza, że typ urządzenia

r

adiowego [*] jest zgodny z dyrektywą 2014/53/

UE.

Pełny tekst deklaracji zgodności UE jest dostępny

p

od następującym adresem internetowym: http://

www.pioneer-car.eu/compliance

Norsk:

Herved Pioneer erklærer at radioutstyr type [*] er i

s

amsvar med direktiv 2014/53/EU.

Den fullstendige teksten i EU-

s

amsvarserklæringen er tilgjengelig på følgende

internettadresse: http://www.pioneer-car.eu/

compliance

Íslenska:

Hér með Pioneer lýsir yfir að tegund þráðlausan

b

únað [*] er í samræmi við tilskipun 2014/53/ESB.

The fullur texti af ESB-samræmisyfirlýsingu er í

b

oði á eftirfarandi veffangi: http://www.pioneer-

car.eu/compliance

Hrvatski:

Pioneer ovime izjavljuje da je radijska oprema tipa

[*

] u skladu s Direktivom 2014/53/EU.

Cjeloviti tekst EU izjave o sukladnosti dostupan je

n

a sljedećoj internetskoj adresi: http://

www.pioneer-car.eu/compliance

Türk:

Burada. Pioneer radyo ekipmani turunun [*] 2014/

5

3/EU direktiflerine uyumlu oldugunu beyan eder.

Avrupa uyumluluk beyaninin tam metni belirtilen

i

nternet sitesinde mevcuttur: http://

www.pioneer-car.eu/compliance

Thank you for purchasing this PIONEER product

To ensure proper use, please read through this manual before using this product. It is

especially important that you read and observe WARNINGs and CAUTIONs in this manual.

Please keep the manual in a safe and accessible place for future reference.

Private households in the member states of the EU, in Switzerland and Norway may return

their used electronic products free of charge to designated collection facilities or to a

retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct

method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment,

recovery and recycling and thus prevent potential negative effects on the environment and

human health.

WARNING

• Do not attempt to install or service this product by yourself. Installation or servicing

of this product by persons without training and experience in electronic equipment

and automotive accessories may be dangerous and could expose you to the risk of

electric shock, injury or other hazards.

• Do not attempt to operate the unit while driving. Make sure to pull off the road and park

your vehicle in a safe location before attempting to use the controls on the device.

CAUTION

• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock

could result. Also, damage to this unit, smoke, and overheating could result from contact

with liquids.

• Always keep the volume low enough to hear outside sounds.

• The Pioneer CarStereo-Pass is for use only in Germany.

Before You Start

If you want to dispose this product, do not mix it with general household waste. There is a

separate collection system for used electronic products in accordance with legislation

that requires proper treatment, recovery and recycling.

4En

•This product is evaluated in moderate and tropical climate condition under the Audio,

video and similar electronic apparatus - Safety requirements, IEC 60065.

If you experience problems

Should this unit fail to work properly, please contact your dealer or nearest authorized

PIONEER Service Station.

MVH-S100UI/S100UB/S100UBG/S100UBA/S100UBW/

S010UB

Getting Started

Basic operation

M.C. (multi-control) dial

BAND/

USB port

Display window

SRC (source)/OFF

DISP (display)

Detach button

AUX input jack (3.5 mm stereo jack)

MUTE

Frequently used operations

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the

antenna, turn the source off.

Display indication

Purpose Operation

Turn on the power* Press SR

C/OFF to turn on the power.

Press and hold SRC

/OFF to turn off the

power.

Adjust the volume Turn the M.

C. dial.

Press MU

TE to mute the unit. Press

MUTE again or turn the M.C. dial to

unmute.

Select a source Press SRC/OFF repeatedly.

Change the display information Press DIS

P repeatedly.

Return to the previous display/list Press BAND/ .

Return to the normal display from the

menu

Press and hold BAND/ .

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the button is pressed.

Appears when the local seek tuning function is set (page 12).

Appears when a traffic program is received.

Appears when the TA (traffic announcements) function is set

(page 12).

Appears when the sound retriever function is set (page 12).

Appears when the iPod control function is set (page 8).

5En

English

Detach the front panel to prevent theft. Remove any cables and devices

attached to the front panel and turn off the unit before detaching it.

Important

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

• Always store the detached front panel in a protective case or bag.

When you turn the ignition switch to ON after installation, [SET UP :YES]

appears in the display.

1 Press the M.C. dial.

The setup menu disappears after 30 seconds of no operation. If you prefer

n

ot to set at this time, turn the M.C. dial to select [NO], then press to

confirm.

2 Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

Detaching the front panel

Setup menu

Menu Item Description

LANGUAGE Select the language to display the text information from

a co

mpressed audio file.

[ENG](English),

[РУС

](Russian),

[TUR](Turkish)

Detach Attach

3 [QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.

C. dial to select

[QUIT :NO], then press to confirm.

4 Press the M.C. dial to confirm the settings.

NOTES

• You can cancel the menu setting by pressing SRC/OFF.

• These settings can be made at any time from the SYSTEM settings (page 13) and INITIAL

settings (page 5).

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4 Turn the M.C. dial to select [YES], then press to confirm.

1 Press and hold SRC/OFF until the unit turns off.

2 Press and hold SRC/OFF to display the main menu.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

CLOCK SET Set the clock.

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

Canceling the demonstration display (DEMO

OFF)

INITIAL settings

Menu Item Description

6En

NOTE

The options vary depending on the unit.

The tuner frequencies on this unit are allocated for use in Western Europe,

Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor

reception. The RDS (radio data system) function only works in areas that

broadcast RDS signals for FM stations.

Menu Item Description

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

SP-P/O MODE Select when there is a full-range speaker connected to

t

he rear speaker output leads and there is a subwoofer

connected to the RCA output.

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected

d

irectly to the rear speaker output leads and there is a

subwoofer connected to the RCA output.

[REAR/REAR] Select when there are full-range speakers connected to

t

he rear speaker output leads and RCA output. If there is

a full-range speaker connected to the rear speaker

output leads, and the RCA output is not used, you may

select either [REAR/SUB.W] or [REAR/REAR].

S/W UPDATE Select to confirm the latest system information on the

un

it.

[SYSTEM INFO]

[SYSTEM

UP

DATE]

Select to update the unit to the latest software and

initialize the unit settings. For details on the latest

software and updating, visit our website.

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically.

(Some of the settings may be retained even after

re

setting the unit.)

[YES], [NO]

Radio

1 Press SRC/OFF to select [RADIO].

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or

[LW].

3 Press a number button (1/ to 6/ ).

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to

[PCH] in the FUNCTION settings (page 12).

The six strongest stations are stored on the number buttons (1/ to 6/ ).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1 After selecting the band, press / to select a station.

Press and hold / then release to seek an available station.

Scanning stops when the unit receives a station. To cancel seek tuning,

press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 12).

To store stations manually

1 While receiving the station you want to store, press and hold one of the

number buttons (1/ to 6/ ) until it stops flashing.

Receiving preset stations

Best stations memory (BSM)

7En

English

The unit searches for a station by PTY (program type) information.

1 Press during FM reception.

2 Turn the M.C. dial to select a program type from [NEWS/INFO],

[POPULAR], [CLASSICS] or [OTHERS].

3 Press the M.C. dial.

The unit begins to search for a station. When it is found, its program service

na

me is displayed.

NOTES

• To cancel the search, press the M.C. dial.

• The program of some stations may differ from that indicated by the transmitted PTY.

• If no station is broadcasting the type of program you searched for, [NOT FOUND] is

displayed for about two seconds and then the tuner returns to the original station.

NOTE

iPod function is not available for MVH-S100UB/S100UBG/S100UBA/S100UBW/S010UB.

Disconnect headphones from the device before connecting it to the unit.

USB devices (including Android™)/iPod

1 Open the USB port cover.

2 Plug in the USB device/iPod using an appropriate cable.

NOTE

To automatically switch to [USB] source when a USB device/iPod is connected to the unit,

set [USB AUTO] to [ON] in the SYSTEM settings (page 14).

Using PTY functions

USB/iPod/AUX

Playing back

CAUTION

Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device

connected directly to the unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 10.

MTP connection

A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using

the cable supplied with the device. However, depending on the connected device and the

numbers of the files in the device, audio files/songs may not be able to be played back via

MTP. Note that MTP connection is not compatible with WAV and FLAC file formats.

NOTE

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the

SYSTEM settings (page 14).

AUX

1 Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source

(page 14).

You can make various adjustments in the FUNCTION settings (page 11).

Note that the following operations do not work for an AUX device. To operate

an

AUX device, use the device itself.

Operations

Purpose Operation

Select a folder/album*1 Press 1/ or 2/ .

Select a track/song (chapter) Press or .

Fast forward or reverse*2 Press and hold or .

8En

Search for a file from a list 1 Press to display the list.

2 Tu

rn the M.C. dial to select the

desired file (folder) name or

category, then press to confirm.

3 Tu

rn the M.C. dial to select the

desired file, then press to confirm.

Playback starts.

View a list of the files in the selected

folder/category*1

Press the M.C. dial when a folder/

category is selected.

Play a song in the selected folder/

cat

egory*1

Press and hold the M.C. dial when a

folder/category is selected.

Alphabetical search (iPod only) 1 P

ress to display the list.

2 Tu

rn the M.C. dial to select the

desired category list, then press

to enter the alphabetical search

mo

de.

(Turning the M.

C. dial twice also

enters the alphabetical search

mode.)

3 Tu

rn the M.C. dial to select a letter,

then press to display the

alphabetical list.

To cancel alphabetical search, press

BAND/ .

Repeat play Press 6/ .

Random/shuffle play Press 5/ .

Shuffle all play (iPod only) Press and hold 5/ .

Pause/resume playback Press 4/PA

USE.

Sound retriever Press 3/S.

Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression

ra

tes

Return to root folder (USB only)*1 Press and hold

.

Purpose Operation

*1 Compressed audio files only

*2 When you use the fast forward or reverse function while playing a VBR file, the playback

time may be not correct.

Link play mode

You can access songs based on the artist, album, or genre currently playing.

1 While listening to a song, press and hold to enter the link play mode.

2 Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then

press to confirm.

The selected song/album will be played after the currently playing song.

NOTE

The selected song/album may be canceled if you use functions other than those from the

link play mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod.

The following iPod models are not compatible with this function.

–iPod nano 1st generation, iPod with video

1 Press BAND/ during playback, then select the control mode.

[CO

NTROL iPod]: The unit’s iPod function can be operated from the

connected iPod.

[CO

NTROL AUDIO]: The unit’s iPod function can only be operated by the

buttons on the unit or supplied remote control. In this mode, the connected

iPod cannot be turned on or off.

NOTES

• Pressing iPod can also switch the control mode (only for MVH-S100UI).

Change drives in USB device

(Devices that support the USB mass

s

torage device class protocol only)

Press BAND/ .

Useful functions for iPod

Purpose Operation

9En

English

• Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected

iPod to resume playback.

• The following operations are still accessible from the unit, even if the control mode is set

to [CONTROL iPod].

– Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

(APP mode is not available for MVH-S100UB/S100UBG/S100UBA/S100UBW/

S010UB.)

You can enjoy listening to an application on an iPhone via the unit. In some

cases, y

ou can control an application by using the unit.

For details on compatible devices, visit our website.

Important

Use of third party apps may involve or require the provision of personally identifiable

information, whether through the creation of a user account or otherwise, and for certain

applications, the provision of geolocation data.

ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING

WITHOUT LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY

PRACTICES. BY ACCESSING THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF

SERVICE AND PRIVACY POLICIES OF THE PROVIDERS. IF YOU DO NOT AGREE WITH THE

TERMS OR POLICIES OF ANY PROVIDER OR DO NOT CONSENT TO THE USE OF

GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY APP.

For iPhone users

This function is compatible with iPhones and iPod touches installed with iOS 5.0 or later.

NOTE

PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT

LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF

SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER.

1 Connect this unit with the mobile device.

• iP

hone via USB (page 7)

App Mode

Playback of an application via the unit

2 Press SRC/OFF to select [APP].

3 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 11).

(MVH-S100UI is only compatible with Spotify installed on iPhone.)

Spotify is a music streaming distribution service not affiliated with Pioneer.

M

ore information is available at http://www.spotify.com.

The Spotify application is available for compatible smartphones, please visit

ht

tps://support.spotify.com/ for the latest compatibility information.

To enjoy Spotify as you drive, first download the Spotify app to your iPhone.

Y

ou can download it on the iTunes App Store. Choose a free account or a paid

Premium account, either in the app or at spotify.com. A Premium account

gives you more features, like offline listening.

Important

• This product incorporates Spotify software which is subject to 3rd party licenses found

here: www.spotify.com/connect/third-party-licenses.

• For information on the countries and regions where Spotify can be used, take a look at

https://www.spotify.com/us/select-your-country/.

Update the firmware of the Spotify application to the latest version before use.

1 Connect this unit with the mobile device.

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press BAND/ .

Spotify®

Listening to Spotify

10En

• iP

hone via USB (page 7)

2 Press SRC/OFF to select [SPOTIFY].

3 Launch the Spotify application on the mobile device and start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 11).

NOTE

The available operations may vary according to the type of contents (track/album/artist/

playlist/radio) you want to play.

Purpose Operation

Skip a track Press or .

Search for a track from a list 1 Press (list) to display the list.

2 Tu

rn the M.C. dial to select the

desired category, then press to

confirm.

3 Tu

rn the M.C. dial to select the

desired file, then press to confirm.

Playback starts.

Pause/resume playback Press 4/

PAUSE.

Thumbs Up (Only for radio) Press 1/ .

Thumbs Down (Only for radio) Press 2/ .

Random play (Only for track/album/

a

rtist/playlist)

Press 5/ .

Repeat play (Only for track/album/

a

rtist/playlist)

Press 6/ .

Start a radio channel based on the

s

ong currently being played.

1 Press and hold (list) to start a

radio.

2 P

ress the M.C. dial.

• T

his function may not be available

depending on the selected song.

NOTE

Some functions of Spotify may not be operated from the unit.

(Pioneer ARC APP for iPhone is not available for MVH-S100UB/S100UBG/

S100UBA/S100UBW/S010UB.)

You can operate the unit from Pioneer ARC APP installed on an iPhone/

A

ndroid device. In some cases, you can control aspects of the application, such

as source selection, pause, etc., by using the unit.

For details on what operations are available on the application, see the

ap

plication’s help section.

WARNING

Do not attempt to operate the application while driving. Make sure to pull off the road and

park your vehicle in a safe location before attempting to use the controls on the application.

For iPhone users

This function is compatible with iPhones (iPhone 5 or later) and iPod touches

in

stalled with iOS 8.0 or later.

You can download Pioneer ARC APP on iTunes App Store.

For Android device users

This function is compatible with devic

es that have Android OS 4.1 or later

installed and also support AOA (Android Open Accessory) 2.0.

You can download Pioneer ARC APP on Google Play™.

NOTE

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to

their own software design, regardless of the OS version.

Store the information about the song

currently being played.

Remove the song information stored.

1 Press and hold 3/S.Rtrv.

[SAVE]/[UNSAVE] appears.

2 P

ress the M.C. dial.

Using Pioneer ARC APP

Purpose Operation

11En

English

1 Connect this unit with the mobile device.

• i

Phone/Android device via USB (page 7)

Proceed to step 6 if you select the USB connection for iPhone.

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [SYSTEM], then press to confirm.

4 Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.

5 Turn the M.C. dial to select [APP CONTROL] for an Android device

connected via USB.

If [ON] is selected in [P.APP AUTO ON] (page 14), Pioneer ARC APP on the

Android device starts automatically, and all the steps are finished.

NOTE

If Pioneer ARC APP has not been installed on your Android device yet, a message that

prompts you to install the application will appear on your Android device. Select [OFF]

in [P.APP AUTO ON] to clear the message (page 14).

6 Press SRC/OFF to select any source.

7 Launch Pioneer ARC APP on the mobile device.

NOTE

You can also launch the application by pressing and holding the M.C. dial for iPhone.

1 Press SRC/OFF to select [ANDROID].

Basic operations

Making a connection with Pioneer ARC APP

Listening to music on Android

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select one of the categories below, then press to

confirm.

• FUNCTION settings (page 11)

• AUDIO settings (page 12)

• SYSTEM settings (page 13)

• ILLUMINATION settings (page 14)

3 Turn the M.C. dial to select the options, then press to confirm.

NOTES

• iPod-related menu items in the following tables are not available for MVH-S100UB/

S100UBG/S100UBA/S100UBW/S010UB.

• APP mode-related menu items in the following tables are not available for MVH-S100UB/

S100UBG/S100UBA/S100UBW/S010UB.

The menu items vary according to the source.

Pause/resume playback Press 4/PAUSE.

Sound retriever Press 3/S.

Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression

ra

tes

Settings

FUNCTION settings

Purpose Operation

12En

Menu Item Description

FM SETTING

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the

br

oadcast signal conditions of the FM band

signal. (Available only when FM band is

selected.)

BSM

Store the six strongest stations on the

num

ber buttons (1/ to 6/ )

automatically.

REGIONAL

[ON], [OFF] Limit the reception to the specific regional

pro

grams when AF (alternative frequencies

search) is selected. (Available only when

FM band is selected.)

LOCAL

FM: [

OFF], [LV1], [LV2], [LV3],

[LV4]

MW/LW: [O

FF], [LV1], [LV2]

Restrict the tuning station according to the

signa

l strength.

TA

[ON], [OFF] Receive current traffic information if

a

vailable. (Available only when FM band is

selected.)

AF

[ON], [OFF] Allow the unit to retune to a different

freq

uency providing the same station.

(Available only when FM band is selected.)

NEWS

[ON], [OFF] Interrupt the currently selected source with

news p

rograms. (Available only when FM

band is selected.)

SEEK

[MAN], [PCH] Assign or buttons to seek the

stations one by one (manual tuning) or

se

lect a station from the preset channels.

SAVE

Store the information about the song

currently being played to your music list on

Spotify.

UNSAVE

Remove the song information stored in

[S

AVE].

S.RTRV

[1] (effective for low

co

mpression rates),

[2] (effective for high

co

mpression rates),

[OFF]

Enhance compressed audio and restore

ri

ch sound.

Not available when the FLAC file is played

back

.

AUDIO BOOK

[FASTER], [NORMAL],

[S

LOWER]

Change the playback speed. (Not available

when [CONTROL iPod] is selected in the

control mode.)

PAUSE

Pause or resume playback.

AUDIO settings

Menu Item Description

FADER*1

Adjust the front and rear speaker balance.

Menu Item Description

USB

iPod

13En

English

BALANCE

Adjust the left and right speaker balance.

EQ SETTING

[SUPER BASS], [POWERFUL],

[NATURAL], [VOCAL],

[CUSTOM1], [CUSTOM2],

[FLAT]

Select an equalizer band and

level fo

r further customising.

Equalizer band: [80H

Z],

[250HZ], [800HZ], [2.5KHZ],

[8KHZ]

Equalizer level: [+

6] to [–6]

Select or customise the equalizer curve.

[CUSTOM1] can be set separately for each

source. However, each of the below

combinations are set to the same setting

automatically.

• U

SB, iPod, ANDROID, SPOTIFY, and APP

(iPhone)

[CUSTOM2] is a shared setting used for all

so

urces.

You can also switch the equalizer by

p

ressing repeatedly (Only for

MVH-S100UB/S100UBG/S100UBA/

S10

0UBW/S010UB).

LOUDNESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

SUB.W CTRL*2

*3

Cut-off frequency: [5

0HZ],

[63HZ], [80HZ], [100HZ],

[125HZ], [160HZ], [200HZ]

Output level: [–2

4] to [+6]

Slope level: [–12],

[–24]

Only frequencies lower than those in the

sel

ected range are output from the

subwoofer.

BASS BOOST

[0] to [+6]

Select the bass boost level.

Menu Item Description

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings

(page 6).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings

(page 6).

*3 Not available when [OFF] is selected in [SUB.W].

You can also access to these menus when the unit is turned off.

HPF SETTING

Cut-off frequency: [

OFF],

[50HZ], [63HZ], [80HZ],

[100HZ], [125HZ], [160HZ],

[200HZ]

Slope level: [

–12], [–24]

Only frequencies higher than the high-pass

filter (HPF) cutoff are output from the

speakers.

SLA

[+4] to [–4] Adjust the volume level for each source

except FM.

Each of the below combinations are set to

t

he same setting automatically.

• US

B, iPod, ANDROID, SPOTIFY, and APP

(iPhone)

SYSTEM settings

Menu Item Description

LANGUAGE

[ENG](English),

[РУС](Russian), [TUR](Turkish)

Select the language to display the text

information from a compressed audio file.

CLOCK SET

Set the clock (page 5).

12H/24H

[12H], [24H] Select the time notation.

Menu Item Description

14En

AUTO PI

[ON], [OFF] Search for a different station with the same

pr

ogramming, even if using a preset

station.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

c

onnected to the unit.

SPOTIFY

[ON], [OFF] Set to [ON] when using the Spotify

fu

nction.

MUTE MODE (O

nly for MVH-S100UI)

[MUTE], [20dB ATT], [10dB

AT

T]

Mute or attenuate sound automatically

when a signal from equipment with a mute

function is received.

PW SAVE*

[ON], [OFF] Reduce the battery power consumption.

Turning on the source is the only operation

allo

wed when this function is on.

ANDROID WIRED

[MEMORY], [APP CONTROL] Select the appropriate connection method

f

or an Android device.

P. AP P AU TO O N

[ON], [OFF]

Select [ON] to automatically launch Pioneer

ARC APP when an Android device is

connected to the unit via AOA. (Not available

when [MEMORY] is selected in [ANDROID

WIRED].)

Menu Item Description

* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned

back on once the battery is reconnected. When [PW SAVE] is off, depending on

connection methods, the unit may continue to draw power from the battery if your

vehicle’s ignition does not have an ACC (accessory) position.

USB AUTO

[ON], [OFF] Select [ON] to automatically switch to

[U

SB] source when a USB device/iPod is

connected to the unit.

Select [OFF] when a USB device/iPod is

being

connected to the unit just for

charging.

ILLUMINATION settings

Menu Item Description

DIM SETTING

[SYNC CLOCK], [MANUAL] Change the display brightness.

BRIGHTNESS

[1] to [10] Change the display brightness.

The available setting ranges differ

d

epending on [DIM SETTING].

Menu Item Description

15En

English

Important

• When installing this unit in a vehicle

without an ACC (accessory) position

on the ignition switch, failure to

connect the red cable to the terminal

that detects operation of the ignition

key may result in battery drain.

• Use of this unit in conditions other

than the following could result in fire

or malfunction.

– Vehicles with a 12-volt battery and

neg

ative grounding.

– When speaker output is used by 4

chan

nels, use speakers over 50 W

(maximum input power) and

between 4 Ω to 8 Ω (impedance

value). Do not use 1 Ω to 3 Ω

speakers for this unit.

– When rear speaker output is used

b

y 2 Ω of subwoofer, use speakers

over 70 W (maximum input power).

* Please refer to connections for a

co

nnection method.

• T

o prevent a short-circuit,

overheating or malfunction, be sure

to follow the directions below.

– Disconnect the negative terminal

o

f the battery before installation.

–Secure the wiring with cable

cl

amps or adhesive tape. Wrap

adhesive tape around wiring that

comes into contact with metal

parts to protect the wiring.

–Place all cables away from moving

p

arts, such as the shift lever and

seat rails.

–Place all cables away from hot

places,

such as near the heater

outlet.

–Do not connect the yellow cable to

t

he battery by passing it through

the hole to the engine

compartment.

–Cover any disconnected cable

co

nnectors with insulating tape.

–Do not shorten any cables.

–Never cut the insulation of the

po

wer cable of this unit in order to

share the power with other devices.

The current capacity of the cable is

limited.

–Use a fuse of the rating prescribed.

–Never wire the negative speaker

cabl

e directly to ground.

– Never band together negative

cab

les of multiple speakers.

• When t

his unit is on, control signals

are sent through the blue/white

cable. Connect this cable to the

system remote control of an external

power amp or the vehicle’s auto-

antenna relay control terminal (max.

300 mA 12 V DC). If the vehicle is

equipped with a glass antenna,

Connections/Installation

Connections

ACC position No ACC position

connect it to the antenna booster

power supply terminal.

• Never connect the blue/white cable

to the power terminal of an external

power amp. Also, never connect it to

the power terminal of the auto

antenna. Doing so may result in

battery drain or a malfunction.

• T

he black cable is ground. Ground

cables for this unit and other

equipment (especially, high-current

products such as power amps) must

be wired separately. If they are not,

an accidental detachment may result

in a fire or malfunction.

• Th

e graphical symbol placed

on the product means direct current.

This unit

Power cord input

Rear output or subwoofer output

Front output (Only for MVH-

S100UI)

Antenna input

Fuse (10 A)

Wired remote input (Only for MVH-

S100UI)

Hard-wired remote control adapter

c

an be connected (sold separately).

Power cord

To power cord input

Depending on the kind of vehicle,

the function of and may be

different. In this case, be sure to

co

nnect to and to .

Yellow

Back-up (or accessory)

Yellow

Connect to the constant 12 V

s

upply terminal.

Red

Accessory (or back-up)

Red

Connect to terminal controlled by

t

he ignition switch (12 V DC).

Connect leads of the same colour

to each other.

Black (chassis ground)

16En

Blue/white

The pin position of the ISO

c

onnector will differ depending on

the type of vehicle. Connect and

when Pin 5 is an antenna

control type. In another type of

v

ehicle, never connect and .

Blue/white

Connect to the system control

t

erminal of the power amp (max.

300 mA 12 V DC).

Blue/white

Connect to the auto-antenna relay

c

ontrol terminal (max. 300 mA 12 V

DC).

Yellow/black (Only for MVH-

S100UI)

If you use equipment with a Mute

fu

nction, wire this lead to the

Audio Mute lead on that

equipment. If not, keep the Audio

Mute lead free of any connections.

Speaker leads

White: Front left

White/black: Front left

Gray: Front right

Gray/black: Front right

Green: Rear left or subwoofer

Green/black: Rear left or

subwoofer

Violet: Rear right or subwoofer

Violet/black: Rear right or

subwoofer

ISO connector

In some vehicles, the ISO connector

ma

y be divided into two. In this

case, be sure to connect to both

connectors.

NOTES

• Change the initial menu of this unit.

Refer to [SP-P/O MODE]

(page 6). The

subwoofer output of this unit is

mon

aural.

• W

hen using a subwoofer of 2 Ω, be

sure to connect the subwoofer to the

violet and violet/black leads of this

unit. Do not connect anything to the

green and green/black leads.

Power amp (sold separately)

Perform these connections when

using the optional amplifier.

System remote control

Connect to blue/white cable.

Power amp (sold separately)

Connect with RCA cables (sold

separately)

To front output*

Front speaker*

To rear output or subwoofer output

Rear speaker or subwoofer

* Only for MVH-S100UI

Important

• Check all connections and systems

before final installation.

• Do not use unauthorized parts as

this may cause malfunctions.

• C

onsult your dealer if installation

requires drilling of holes or other

modifications to the vehicle.

• Do n

ot install this unit where:

–it may interfere with operation of

t

he vehicle.

–it may cause injury to a passenger

as a r

esult of a sudden stop.

• T

he semiconductor laser will be

damaged if it overheats. Install this

unit away from hot places such as

near the heater outlet.

• Opti

mum

performance is

obtained when the

unit is installed at an

angle of less than 60°.

• W

hen installing, to ensure proper

heat dispersal when using this unit,

make sure you leave ample space

behind the rear panel and wrap any

loose cables so they are not blocking

the vents.

DIN mount installation

1 Insert the supplied mounting

sleeve into the dashboard.

2 Secure the mounting sleeve by

using a screwdriver to bend the

metal tabs (90°) into place.

Dashboard

Mounting sleeve

• M

ake sure that the unit is

installed securely in place. An

unstable installation may cause

skipping or other malfunctions.

When not using the supplied

mounting sleeve

1 Line up the holes on the

mounting bracket with the holes

on the sides of the unit to attach

the bracket.

2 Screw in one screw on each side to

hold the unit in place.

Installation

Leave ample

space

5 cm

17En

English

Tapping screw (5 mm × 9 mm,

not supplied with product)

Mounting bracket

Dashboard or console

Using the included bracket

Check to make sure that the included

bracket matches your particular

model of vehicle and then attach it to

the unit as shown below.

Removing the unit (installed

with the supplied mounting

sleeve)

1 Remove the trim ring.

Trim ring

Notched tab

• R

eleasing the front panel allows

easier access to the trim ring.

• W

hen reattaching the trim ring,

point the side with the notched

tab down.

2 Insert the supplied extraction

keys into both sides of the unit

until they click into place.

3 Pull the unit out of the dashboard.

Screw

Bracket

18En

The display automatically returns to

the normal display.

→ No operations have been made for

about 30 seconds.

–Perform an operation.

The repeat play range changes

unexpectedly.

→ Depending on the repeat play

range, the selected range may

change when another folder or

track is being selected or during

fast forwarding/reversing.

–Select the repeat play range

ag

ain.

A subfolder is not played back.

→ Subfolders cannot be played when

[FLD] (folder repeat) is selected.

–Select another repeat play range.

The sound is intermittent.

→ You are using a device, such as a

cellular phone, that may cause

audible interference.

–Move electrical devices that may

be caus

ing the interference away

from the unit.

Common

AMP ERROR

→ This unit fails to operate or the

speaker connection is incorrect.

→ T

he protective circuit is activated.

–Check the speaker connection.

–Turn the ignition switch OFF and

back

to ON again. If the message

remains, contact your dealer or an

authorized Pioneer Service

Station for assistance.

NO XXXX (NO TITLE, for example)

→ There is no embedded text

information.

– Switch the display or play another

tr

ack/file.

USB device/iPod

FORMAT READ

→ Sometimes there is a delay

between the start of playback and

when you start to hear any sound.

– Wait until the message

d

isappears and you hear sound.

NO AUDIO

→ There are no songs.

–Transfer the audio files to the USB

de

vice and connect.

→ T

he connected USB device has

security enabled.

Additional Information

Troubleshooting Error messages

–Follow the USB device

instructions to disable the

security.

SKIPPED

→ The connected USB device contains

DRM protected files.

–The protected files are skipped.

PROTECT

→ All the files on the connected USB

device are embedded with DRM.

–Replace the USB device.

N/A USB

→ The connected USB device is not

supported by this unit.

–Disconnect your device and

r

eplace it with a compatible USB

device.

HUB ERROR

→ The USB device connected via a

USB hub is not supported by this

unit.

–Connect the USB device directly

t

o this unit using a USB cable.

CHECK USB

→ The USB connector or USB cable

has short-circuited.

–Check that the USB connector or

U

SB cable is not caught in

something or damaged.

→ T

he connected USB device

consumes more than maximum

allowable current.

–Disconnect the USB device and

d

o not use it. Turn the ignition

switch OFF and back to ACC or

ON. Connect only compliant USB

devices.

→ The iP

od operates correctly but

does not charge.

– Make sure the connection cable

f

or the iPod has not shorted out

(e.g., not caught in metal objects).

After checking, turn the ignition

switch OFF and back to ON, or

disconnect the iPod and

reconnect.

ERROR-19

→ Communication failed.

– Perform one of the following

op

erations, then return to the

USB source.

• T

urn the ignition switch OFF and

back to ON.

• Di

sconnect the USB device.

• C

hange to a different source.

→ iP

od failure.

– Disconnect the cable from the

iP

od. Once the iPod’s main menu

is displayed, reconnect the iPod

and reset it.

ERROR-23

→ USB device was not formatted

properly.

– Format the USB device with

FAT

12, FAT16 or FAT32.

ERROR-16

→ The iPod firmware version is old.

– Update the iPod version.

→ iP

od failure.

– Disconnect the cable from the

iP

od. Once the iPod’s main menu

19En

English

is displayed, reconnect the iPod

and reset it.

STOP

→ There are no songs in the current

list.

–Select a list that contains songs.

NOT FOUND

→ No related songs.

–Transfer songs to the iPod.

APP

START UP APP

→ The application has not started

running yet.

–Operate the mobile device to

s

tart up the application.

Spotify

CHECK APP

→ Connection to the Spotify

application failed.

–Follow the instructions that

ap

pear on the screen.

USB storage device

• Connections via USB hubs are not

supported.

• F

irmly secure the USB storage device

before driving. Do not let the USB

storage device fall onto the floor,

where it may become jammed under

the brake or accelerator pedal.

• D

epending on the USB storage

device, the following problems may

occur.

–Operations may vary.

–The storage device may not be

reco

gnized.

–Files may not be played back

pr

operly.

–The device may cause audible

int

erference when you are listening

to the radio.

iPod

• Do not leave the iPod in places with

high temperatures.

• F

irmly secure the iPod when driving.

Do not let the iPod fall onto the floor,

where it may become jammed under

the brake or accelerator pedal.

• T

he settings of the iPod such as the

equalizer and repeat play are

changed automatically when the

iPod is connected to the unit. Once

the iPod is disconnected, those

settings will return to the original

settings.

• In

compatible text saved on the iPod

will not be displayed by the unit.

• O

nly the first 32 characters can be

displayed as a file name (including

the file extension) or a folder name.

Handling guidelines

Compressed audio

compatibility

• The unit may not work properly

depending on the application used

to encode WMA files.

• T

here may be a slight delay at the

start of the playback of audio files

embedded with image data, or audio

files stored on a USB device with

numerous folder hierarchies.

• Rus

sian text to be displayed on this

unit should be encoded in one of the

following character sets:

–Unicode (UTF-8, UTF-16)

–A character set other than Unicode

t

hat is used in a Windows

environment and is set to Russian

in the multi-language setting

CAUTION

• Pioneer cannot guarantee

compatibility with all USB mass

storage devices, and assumes no

responsibility for any loss of data on

media players, smartphones, or

other devices while using this

product.

• Do not leave discs or a USB storage

device in any place that is subject to

high temperatures.

WMA files

MP3 files

WAV files

• WAV file formats cannot be

connected via MTP.

FLAC files

• FLAC file formats cannot be

connected via MTP.

File extension .wma

Bit rate 48 kbps to 320 kbps

(CBR), 48 kbps to

384 kbps (VBR)

Sampling

frequency

32 kHz, 44.1 kHz, 48

kHz

Windows Media™

Audio Professional,

Lossless, Voice/

DRM Stream/

Stream with video

Not compatible

File extension .mp3

Bit rate 8 kbps to 320 kbps

(CBR), VBR

Sampling

frequency

8 kHz to 48 kHz (32

kHz, 44.1 kHz, 48

kHz for emphasis)

Compatible ID3 tag

version

1.0, 1.1, 2.2, 2.3, 2.4

(ID3 tag Version 2.x

is given priority

over Version 1.x.)

M3u playlist Not compatible

MP3i (MP3

interactive), mp3

PRO

Not compatible

File extension .wav

Quantization bits 8 and 16 (LPCM), 4

(MSADPCM)

Sampling

frequency

16 kHz to 48 kHz

(LPCM), 22.05 kHz

and 44.1 kHz (MS

ADPCM)

20En

• FLAC files may not be playable,

depending on the encoder.

USB device

• There may be a slight delay when

starting playback of audio files on a

USB storage device with numerous

folder hierarchies.

This unit supports only the following iPod

models. Supported iPod software versions

are shown below. Older versions may not

be supported.

Made for

–iPod touch (1st through 6th

generation)

–iPod classic

–iPod with video

–iPod nano (1st through 7th

ge

neration)

–iPhone 6s

–iPhone 6s Plus

–iPhone 6

–iPhone 6 Plus

–iPhone 5s

–iPhone 5c

–iPhone 5

–iPhone 4s

–iPhone 4

–iPhone 3GS

–iPhone 3G

–iPhone

• Ope

rations may vary depending on

the generation and/or software

version of the iPod.

• U

sers of iPod with the Lightning

Connector should use the Lightning

to USB Cable (supplied with iPod).

• U

sers of iPod with the Dock

Connector should use the CD-IU51.

For details, consult your dealer.

• Re

fer to the iPod manuals for

information about the file/format

compatibility.

• A

udiobook, Podcast: Compatible

CAUTION

Pioneer accepts no responsibility for

data lost on the iPod, even if that data

is lost while this unit is used.

File extension .flac

Sampling

frequency

8/11.025/12/16/

22.05/24/32/44.1/

48 kHz

Quantization bit

rate

16 bit

Channel mode 1/2 ch

Playable folder

hierarchy

Up to eight tiers (A

practical hierarchy

is less than two

tiers.)

Playable folders Up to 500

Playable files Up to 15 000

Playback of

copyright-

protected files

Not compatible

Partitioned USB

device

Only the first

partition can be

played.

iPod compatibility

The user cannot assign folder

numbers and specify playback

sequences with this unit. Sequence of

audio file depends on the connected

device.

Note that the hidden files in a USB

device cann

ot be played back.

Example of a hierarchy

iTunes

Apple and iTunes are trademarks of

Ap

ple Inc., registered in the U.S. and

other countries.

Sequence of audio files

Folder

Compressed

audio file

to : Playback sequence

01 to 05: Folder number

Russian character

chart

Copyright and

trademark

D: Display C: Character

Страница загружается ...

Pioneer MVH-S100UBA Руководство пользователя

Это руководство также подходит для

Pioneer MVH-S100UBA Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов