Zanussi ZWP580 Руководство пользователя

Бренд: Zanussi

Модель: ZWP580

Категория: Стиральные машины

Тип: Руководство пользователя

User manual

Washing

machine

ZWP 580

Инструкцияѝ

поѝ

эксплуатации

Стиральнаяѝ

машина

Használati

útmutató

Automata

mosógép

Thank you for selecting our appliance

We wish you lots of enjoyment with your new

appliance and we hope that you will consider our

brand again when purchasing household

appliances.

Please read this user manual carefully and keep

it throughout the product life cycle as a reference

document. The user manual should be passed

on to any future owner of the appliance.

Köszönjük, hogy a mi készülékünket választotta!

Kívánjuk, hogy sokszor lelje örömét új

készülékében, és reméljük, hogy ismét a mi

márkánkat keresi majd, amikor háztartási

készülékeket vásárol.

Kérjük, hogy figyelmesen tanulmányozza át

ezt a felhasználói kézikönyvet, és őrizze

meg a termék teljes életciklusa során, hogy

később is a rendelkezésére álljon. A fel-

használói kézikönyvet adja át a készülék

esetleges jövőbeli tulajdonosának

Спасибо, что Вы выбрали наш электробытовой

прибор

Мы желаем Вам получить массу

удовольствия от Вашего нового прибора

и надеемся, что в следующий раз Вы

вновь выберете наше изделие.

Пожалуйста, внимательно прочтите это

руководство, и во время эксплуатации

прибора используйте его в качестве

справочного документа. Руководство

пользователя должно передаваться

каждому будущему владельцу изделия.

Contents

Warnings.........................................................4

Description of the appliance............................6

Programmes table...........................................8

How to run a wash cycle.................................9

Washing guide .............................................12

Care and cleaning.........................................14

Operating problems ......................................15

Technical specifications ................................17

Consumption.................................................18

Environment..................................................19

Installation.....................................................20

Warnings

WARNING !

These warnings are for the safety of you and

others around you.

Please read these points carefully before ins-

talling and using your appliance. Thank you

for your attention.

Keep this user manual with your appliance. If

the appliance is sold or given to another per-

son, please make sure this user manual is

included. This way, the new user will have

the relevant operating instructions and war-

nings.

General safety

• Do not modify or attempt to modify this

appliance. This would put yourself in danger.

• Ensure that all coins, safety pins, brooches,

screws etc have been removed before starting

a washing programme. If left in washing, they

can seriously damage the appliance.

• Use the amount of detergent recommended in

the paragraph “Using the right amount of

detergent”.

• Put small items together (socks, belts etc.) in

a small linen bag or pillow case.

• Unplug and close inlet hose tap after using

appliance.

• Always disconnect the power supply from the

appliance before cleaning or maintenance.

• Do not machine wash clothes with ribbing,

unfinished or torn material.

Installation

• Unpack or ask for the appliance to be unpac-

ked immediately upon arrival. Check the out-

side of the appliance is not damaged in any

way. Put any complaints you may have in wri-

ting on your copy of the delivery receipt.

• The appliance must be untied before connec-

ting to power supply or using. If all transit pac-

kaging is not completely removed, the

appliance or surrounding furniture could be

damaged.

• Connection to the water supply must be car-

ried out by a qualified plumber.

• If your domestic electrical circuit needs adap-

ting to allow the appliance to be plugged in,

use a qualified electrician.

• Ensure that, after installation, the power cable

is not trapped under the appliance.

• If the appliance is installed on carpeted floor,

ensure that the carpet does not obstruct any

ventilation ducts located at the base of the

appliance.

• The appliance must be equipped with an ear-

thed power plug which conforms to regula-

tions.

• Before connecting your appliance to the

power supply, carefully read the instructions in

the chapter entitled “Electrical connection”.

• Replacing the power cable should only be car-

ried out by the After Sales Service.

• The manufacturer cannot be held responsible

for any damage resulting from incorrect instal-

lation.

Precautions to be taken against frost

If your appliance is exposed to temperatures

below 0°C, the following precautions must be

taken :

• Close the tap and disconnect the inlet hose.

• Place the end of this hose and the drain hose

in a basin on the floor.

• Select the Drain programme let it run until the

end of the cycle.

• Disconnect the appliance from the power sup-

ply by turning the program selector to “Stop”.

• Unplug the appliance.

• Screw the inlet hose back on and replace the

drain hose.

This way, the water remaining in the hoses will

be drained away, avoiding any ice formation

which would damage your appliance.

Before turning your appliance on again, ensure

that it is installed in an area where the tempera-

ture will not fall below freezing.

Use

• Your appliance is intended for normal domes-

tic use. Do not use the appliance for commer-

cial or industrial purposes or for any purpose

other than the one it was designed for :

washing, rinsing and spinning.

• Only wash items suitable for this treatment.

Refer to the instructions on the label of each

item.

• Do not put items into the washing machine

which have had stains removed with petrol,

alcohol, trichlorethylen etc. If such stain remo-

vers have been used, wait until the product

has evaporated before putting these items into

the drum.

• Your appliance has been designed for use by

adults. Ensure children do not touch the

appliance or use it as a toy.

Description of the appliance

The control panel

Programme selector

• On the position, the appliance is switched off.

•

On another position, the appliance is switched on and a pro-

gramme is selected.

Programme selector

Spin

pushbutton

Options

pushbuttons

Start/Pause

pushbutton

Lights of cycle

progress

Delay start

pushbutton

Spin pushbutton

•

Choice of the desired spin speed or Rinse hold option by pressing

the pushbutton.

Options pushbutton

•

Choice of the options by pressing the pushbuttons.

Lights of cycle progress

•

Indicate the phase in progress.

Start/Pause pushbutton

•

To start the programme ou pause the programme.

Delay start pushbutton

•

Choice of a delay start by pressing the pushbutton.

Dispenser box

The control panel

Lid handle

Adjustable level-

ling feet

Prewash

Softener (do not fill

above the MAX sym-

bol

)

Wash

Programmes table

Programme / Type of washing Load Possible options

Cottons : White or colour, e.g., normally soiled work clothes, bed

linen, table linen, body linen, towels.

5,5 kg Prewash

Quick

Rinse plus

Rinse hold

Delay start

Eco* : White or colour, e.g., normally soiled work clothes, bed linen,

table linen, body linen, towels.

5,5 kg

Synthetics : Synthetic fabrics, body linen, coloured fabrics, non-iron

shirts, blouses.

2,5 kg

Delicates : For all delicate materials, for example, curtains.

2,5 kg

Easy iron : Reduces creasing and makes ironing easier.

1,0 kg Prewash

Rinse plus

Rinse hold

Delay start

Handwash : Very delicate items carrying the “wash by hand” label.

1,0 kg Rinse hold

Delay start

Wool : Machine washable wool carrying the labels “pure new wool,

machine washable, does not shrink”.

1,0 kg Rinse hold

Delay start

Sport : For very dirty outdoor sports clothes. The Prewash option is

activated.

2,5 kg Rinse plus

Rinse hold

Delay start

Rinses : Hand washed items can be rinsed in this program. 5,5 kg Rinse plus

Rinse hold

Delay start

Drain : Runs an empty cycle after a Rinse hold or (Night Silence Plus). 5,5 kg

Spin : A spin cycle from 500 to 850 rpm after a Rinse hold (or Night

silence plus.

5,5 kg Delay start

Reference programme for test conforming to CEI 456 standard (Eco 60° C).

Not available with Eco programme.

How to run a wash cycle ?

Using for the first time

IMPORTANT !

• Ensure the electrical and water connections

comply with the installation instructions.

• Remove the polystyrene insert and all other

items inside the drum.

•

Run an initial wash cycle at 90°C, without any

washing but with detergent to clean the water

tank.

Daily use

Loading washing

• Open the lid of the appliance.

• Open the drum by depressing the locking but-

ton A : The two shutters unlock automatically.

•

Load the washing, close the drum and the lid

of your washing machine.

WARNING !

Before closing the lid of your appliance, ensure

that the drum is properly closed :

• When the two shutters are closed,

•

locking button A released.

Proportioning of detergents

Your washing machine has been designed to

reduce your water and detergent consumption.

You can therefore reduce the amounts recom-

mended by detergent manufacturers.

Pour the amount of washing powder into the

washing and prewash compartments if

you have selected the “prewash” option. Pour

fabric softener into the compartment if neces-

sary .

If you use another detergent type, refer to the

section “detergents and additives” in the

washing guide.

Selection of desired programme

You can find the right programme for different

types of washing in the programme table (see

“Programme table”).

Turn the programme selector to the required

programme. The “Start/Pause” pushbutton

flashes green.

WARNING !

If you turn the programme selector to another

programme while a cycle is in progress, the

appliance will ignore the new selected pro-

gramme. The “Start/Pause” pushbutton

flashes red for a few seconds.

Selecting the spin speed

Press the “Spin”

pushbutton

to change the spin speed, if you

want your washing to be spun at

a different speed to the one

selected by the appliance. You

can also select “No spin”

“Rinse

hold”

or “Night silence

plus”

The maximum speeds are :

Cottons, Eco, Synthetics, Easy

iron, Handwash, Wool, Sport :

850 rpm,

Delicates : 700 rpm.

At the end of the programme, if you have selec-

ted “Rinse hold” or “Night silence plus”, you

then need to select a “Spin” or “Drain”

programme to finish the cycle.

“Rinse hold”

The washing machine will not drain the water

from the last rinse, so will not crease the laundry.

Selecting options

You must select the dif-

ferent options after

selecting the pro-

gramme and before

pressing the “Start/

Pause”

pushbutton

(see “Programme

table”).

Press the desired button(s) ; the corresponding

lights come on. If pressed again, the lights go

out. If one of the options is not compatible with

the selected programme, the “Start/Pause”

pushbutton flashes red..

“Prewash” option

The appliance runs a prewash at 30°C max. The

prewash finishes with a short spin cycle for cot-

ton or synthetic programmes, and with an empty

cycle for delicates programmes.

“Quick” option

The washing time will be reduced depending of

the selected programme.

“Rinse plus” option

The washing machine will add one or more rin-

ses during the cycle.

This option is recommended for people with sen-

sitive skin and in soft water areas.

Temporary :

Press the “Rinse plus” pushbutton. The

option is only active for the selected programme.

Permanent :

Hold down the “Option” and “Rinse plus”

pushbuttons for a few seconds. The option is

permanently activated, even if the appliance is

switched off..

To deactivate it, repeat the process.

“Delay start”

This option allows you to delay the start of a

wash programme by 3, 6 or 9 hours by pressing

the “Delay start” pushbutton.

You can change or cancel the delayed start time

at any time before you press the “Start/Pause”

pushbutton, by pressing the “Delay start”

pushbutton again (when all indicators are off, the

wash programme will start immediately).

If you have already pressed the “Start/Pause”

pushbutton and you want to change or can-

cel the delayed start, proceed as follows :

depending on model

• To cancel the delayed start and start the cycle

immediately, press “Start/Pause” and then

“Delay start” . Press “Start/Pause” to

start the cycle.

• To change the timer delay period, you must go

through the “Off” position and reprogram

your cycle.

WARNING !

The lid will be locked during the delayed start

time. If you need to open it, you must first pause

the appliance by pressing the “Start/Pause”

pushbutton. After closing the lid again, press the

“Start/Pause” pushbutton.

Start of the programme

Press the “Start/Pause”

pushbutton to start the cycle ;

the corresponding light will

come on green.

It is normal for the programme

selector to remain stationary during the cycle.

The light corresponding to the

current cycle is illuminated.

Prewash + Wash

Rinse + Spin

End of cycle

Interrupting a programme

Adding washing during the first 10 minutes

Press the “Start/Pause” pushbutton : the cor-

responding light will flash green while the

appliance is paused. The lid can only be opened

around 2 minutes after the washing machine has

come to a stop. Press the “Start/Pause” pus-

hbutton again to continue the programme.

Modifying the programme in progress

Before making any changes to the current pro-

gramme, you need to pause the washing

machine by pressing the “Start/Pause” push-

button. If the modification is not possible, the

“Start/Pause” pushbutton flashes red for a

few seconds. If you still decide to change the

programme, you must cancel the current pro-

gramme (see below).

Cancelling the programme

If you want to cancel the programme, turn the

programme selector to the “Off” position.

End of the programme

The washing machine stops automatically ; the

“Start/Pause” pushbutton goes out and the

light comes on. The lid can only be opened

around 2 minutes after the washing machine has

come to a stop.

Turn the programme selector to the “Off” posi-

tion.

Remove washing.

Unplug and close water inlet tap.

WARNING !

We recommend leaving the lid and drum open

after use to ventilate the water tank.

Standby mode

If the appliance is on but no commands are

selected for 10 min before or after a cycle, it

goes into standby mode. All the lights go out and

“Start/Pause” flashes slowly.

To exit standby mode, simply press any pushbut-

ton or turn the programme selector.

Washing guide

IMPORTANT !

Sorting and preparing the washing

• Sort washing by type and care label (refer to

International symbols section below) : normal

wash for tough fabrics which can withstand

intense washing and spinning cycles ; delicate

wash for delicate fabrics which need to be

treated with care. For mixed loads, loads with

items of different types of material, choose a

programme and a temperature suitable for the

most fragile material.

• Wash whites and colours separately : Othe-

rwise, whites will be coloured or will turn grey.

• New coloured clothes often contain excess

dye. It is recommended to wash such items

separately the first time. Follow care instruc-

tions “wash separately” and “wash separately

several times”.

• Empty pockets and unfold items.

• Remove loose buttons, pins and fasteners.

Close zip fasteners, tie ups laces and straps.

• Turn multilayered fabrics (sleeping bags, ano-

raks, etc.), coloured headwear, wool and

material with printed designs inside out.

• Wash small fragile items (socks, tights, bras,

etc) in a net bag.

• Take special care with curtains. Remove

hooks and place net curtains in a net or bag.

Wash loads depending on type of

materials

The amount of washing placed in the drum must

not exceed the maximum capacity of the

washing machine. This capacity can vary depen-

ding on the type of materials. Reduce the quan-

tity if washing is heavily soiled or made of

absorbant material.

Not all textiles have the same volume in the

drum or the same water absorption levels. In

general, the drum must therefore be filled :

• to full capacity but avoiding excessive pres-

sure on cotton, linen and cotton/linen mixtu-

res,

• to half capacity for processed cottons and

synthetic fibres,

• to a third of its capacity for very fragile items

such as net curtains and woollens.

For mixed loads, fill drum depending on most

fragile materials.

Detergents and additives

Only use detergents and additives designed for

use in a washing machine. Refer to manufactu-

rer’s recommendations and also Dispenser box

and Using the right amount of detergent sec-

tions.

We do not recommend mixing different types of

detergents. This may spoil the washing.

The amount of detergent to be used depends on

the size of the load, the hardness of the water

and how heavily soiled the washing is.

If the water is soft, reduce the amount slightly. If

the water contains lime scale (a descaler is

recommended) or if the washing is heavily soiled

or stained, increase the amount slightly.

You can obtain information on the hardness

level of water in your area by contacting your

water company or other competent source.

There are no restrictions on the use of powder

detergents.

Liquid detergents must not be used when a

prewash has been selected. For cycles without

prewash, they can be added either via means of

a dosing ball, or in the detergent compartment.

In either case, the wash cycle must be started

immediately.

Detergent tablets or doses must be placed in the

detergent compartment of your appliance’s dis-

penser box.

For stain removal before a wash cycle, please

refer to manufacturer’s recommended amounts

and instructions. If you use a detergent to

remove stains, the wash cycle must be started

immediately.

International symbols

NORMAL

WASH

Wash at 95°C Wash at 60°C Wash at 40°C Wash at 30°C Hand wash Do not wash

DELICATE

WASH

BLEACHING Whitewashing (bleach) allowed (cold only and in diluted

solution)

No whitewashing (bleach)

IRONING High temperature

(max 200°C)

Mid temperature

(max 150°C)

Low temperature

(max 100°C)

Do not iron

DRY

CLEANING

Dry cleaning

(all common solvents)

Dry cleaning

(all common solvents

except trichlorethylene

Dry cleaning

(only oil-based solvents

and R113)

Do not dry clean

High

temperature

Mid

temperature

DRYING Dry flat Hang dry Dry on clothes

hanger

Tumble drying per-

mitted

Do not tumble dry

Care and cleaning

WARNING !

Unplug the appliance before cleaning.

Descaling the appliance

To descale the appliance, use an appropriate

non-corrosive product designed for washing

machines. Read product label for recommended

amounts and how often descaling should be car-

ried out.

The exterior

Use warm soapy water to clean the exterior of

the appliance. Never use alcohol, solvents or

similar products.

Dispenser box

To clean, proceed as follows :

Object trap

Regularly clean out the object trap which is loca-

ted at the bottom of the drum :

Water inlet filters

To clean the 2 filters, proceed as follows :

Operating problems

Numerous checks were carried out on your

appliance before it left the factory. However,

should you notice a malfunction, please refer to

the sections below before contacting the after-

sales service.

Problems Causes

The washing machine doesn’t start

or doesn’t fill :

•the appliance isn’t plugged in correctly, the electrical installation

isn’t working,

•the lid of your appliance and the drum shutters aren’t closed firmly,

•the programme start command hasn’t been properly selected,

•there is a power failure,

•the water supply has been cut off,

•the water inlet tap is closed,

•the water inlet filters are dirty,

•a red tab appears on the water inlet hose.

The appliance fills but empties

straight away :

•the drainage U-piece is fixed too low (see installation section).

The washing machine doesn’t rinse

or doesn’t empty :

•the drain hose is blocked or bent,

•the drainage filter is obstructed,

•the out of balance detector has been activated : washing is une-

venly distributed in the drum,

•the “Drain” programme or “Night Silence Plus” or “Rinse hold”

options have been selected,

•the height of the drainage U-piece is unsuitable.

You have found water around the

washing machine :

•too much detergent has caused foam to overflow,

•the detergent is unsuitable for machine washing,

•the drainage U-piece isn’t attached correctly,

•the water inlet hose is leaking.

Wash is unsatisfactory : •the detergent is unsuitable for machine washing,

•there is too much washing in the drum,

•the wash cycle is unsuitable,

•there isn’t enough detergent.

The appliance vibrates, is noisy : •the appliance hasn’t been untied properly (see untying section),

•the appliance isn’t level and is unbalanced,

•the appliance is too close to the wall or furniture,

•washing is unevenly distributed in the drum,

•the load is too small.

the wash cycle is much too long : •the water inlet filters are dirty,

•the power or water supply has been cut off,

•the motor overheating detector has been activated,

•the water inlet temperature is lower than usual,

•the foam detection security system has been activated (too much

detergent) and the washing machine has begun draining the foam,

•the out of balance detector has been activated : an extra phase has

been added to distribute washing more evenly in the drum.

The washing machine stops during

a wash cycle :

•the water or electricity supply is defective

•a Rinse hold has been selected,

•the drum shutters are open.

The lid doesn’t open at the end of

the cycle :

•the “immediate opening”

light is not lit,

•the temperature inside the drum is too high,

•the lid unlocks 1 - 2 minutes after the end of the cycle*.

The “Start/Pause” pushbutton

flashes red

***

•the lid isn’t closed properly.

The “Start/Pause” pushbutton**

flashes red*** :

•the drainage filter is obstructed,

•the drain hose is blocked or bent,

•the drain hose is fixed too high (see “Installation” section).

•the drainage pump is blocked,

•the standpipe is blocked.

The “Start/Pause” pushbutton**

flashes red*** :

•the water inlet tap is closed,

•the water supply has been cut off.

Softener runs directly into the drum

when filling the dispenser box :

•you have gone past the MAX indicator.

* Depending on model.

**On some models, the audible signals can sound.

*** After solving any problems, press the ‘Start/Pause’ pushbutton to restart the interrupted programme.

Problems Causes

Technical specifications

DIMENSIONS Height

Width

Depth

850 mm

400 mm

600 mm

LINE VOLTAGE / FREQUENCY

POWER CONSUMPTION

230 V / 50 Hz

2300 W

WATER PRESSURE

Connection to water supply

Minimum

Maximum

0,05 MPa (0,5 bar)

0,8 MPa (8 bar)

Type 20x27

This appliance conforms to the CEE 89-336 directive concerning the limiting of radio-electric interfe-

rence and the 2006/95/CE directive concerning electrical safety.

Consumption

Programme / Washing type

Temperatu-

res

Average consumption**

°C Litres kWh Time

Cottons 90 67 2,20 140-150

Eco* 60 49 1,04 135-145

Cottons 60 62 1,30 120-130

Cottons 40 62 0,75 115-125

Cottons 30 62 0,55 110-120

Cottons

cold

62 0,45 95-105

Synthetics 60 48 0,85 90-100

Synthetics 40 48 0,65 75-85

Synthetics 30 48 0,55 70-80

Synthetics

cold

48 0,20 70-80

Easy iron 40 51 0,55 95-105

Delicates 40 53 0,55 60-70

Delicates 30 53 0,30 55-65

Delicates

cold

53 0,15 50-60

Handwash 30 48 0,40 50-60

Wool 40 48 0,45 55-65

Sport 40 50 0,70 95-105

Rinses - 32 0,05 50-60

Drain - - 0,002 0-10

Spin - - 0,015 10-20

* Reference programme for test conforming to CEI 456 standard (Eco 60° C) : 49 L / 1,04 kWh / 140 min

** Average figures which can vary depending on conditions of use.

Consumptions shown refer to the maximum temperature for each programme.

Environment

Disposing of the appliance

All materials carrying the symbol are recy-

clable. Dispose of them at a waste collection site

(enquire at your local council) for collection and

recycling.

When disposing of your appliance, remove all

parts which could be dangerous to others: cut off

the power supply cable at the base of the

appliance.

The symbol on the product or on its packa-

ging indicates that this product may not be trea-

ted as household waste. Instead it shall be

handed over to the applicable collection point for

the recycling of electrical and electronic equip-

ment. By ensuring this product is disposed of

correctly, you will help prevent potential negative

consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product. For

more detailed information about recycling of this

product, please contact your local city office,

your household waste disposal service or the

shop where you purchased the product.

Protecting the environment

To save water and energy and therefore help

protect the environment, we recommend the fol-

lowing :

• Whenever possible, use the appliance at full

capacity and avoid partial loads.

• Only use the prewash and soak programmes

for heavily soiled items.

• Use an appropriate amount of detergent for

the hardness of the water (cf. section “Using

the right amount of detergent”), the size of the

load and how soiled the washing is.

Installation

WARNING !

Remove all protective packaging for transit

before using for the first time. Keep in case nee-

ded for future transit : Transporting a non-secu-

red appliance may damage internal components

and cause leakages and malfunctions. The

appliance can also be damaged through physi-

cal contact.

Unpacking

Untying

7 8

Страница загружается ...

Zanussi ZWP580 Руководство пользователя

Бренд: Zanussi

Модель: ZWP580

Категория: Стиральные машины

Тип: Руководство пользователя

Скачать PDF

сообщить о нарушении

на других языках

English: Zanussi ZWP580 User manual

Zanussi ZWP580 Руководство пользователя

Zanussi ZWP580 Руководство пользователя

на других языках

Похожие модели бренда

Модели других брендов