Hyundai H-CMD4021 Руководство пользователя

Категория
Видеосистемы для автомобилей
Тип
Руководство пользователя
МУЛЬТИМЕДИЙНЫЙ DVD/
CD/MP3-РЕСИВЕР С 4.3” TFT-
ДИСПЛЕЕМ и ВСТРОЕННЫМ
ТВ-ТЮНЕРОМ
DVD/CD/MP3 RECEIVER WITH
4.3” TFT DISPLAY AND BUILT-IN
TV TUNER
Руководство по эксплуатации Instruction manual
H-CMD4021
2 3
Table of contents Table of contents
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
14
14
14
14
14
15
15
15
15
15
15
15
16
16
16
16
17
17
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
18
18
18
19
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation/Connection
Installation
General notes
DIN front/rear mounting
1. DIN front mounting (Method A)
Dismantling the unit
Trim frame installation
2. DIN rear mount
Detachable front panel
Anti-theft system
Parking wire connection
Reverse driving cable connection
Connection
Connection diagram
Using the ISO Connector
Audio-video connector table
Operation
Control elements
Front panel
Inner panel
Remote controller
Changing the battery
General operations
Touch screen
Turn on/off the power
Mute
Adjust the volume
Source selection
Panel tilt
Calibration
AUX in jack
Loudness
System setup
Radio operation
Radio Menu
2
4
4
4
5
5
5
5
5
5
6
6
6
6
7
7
8
8
8
9
10
10
10
10
11
11
12
12
12
12
12
12
12
12
12
12
12
14
14
Band select
Automatical/Manual search
Automatic store and scan
Saving and calling stations
Mono/stereo reception
RDS system
Radio RDS Menu
TA function
REG (Regional) mode
PTY (Program Type) function
TV tuner operation
TV mode menu
Automatic tuning
Disc/USB/SD/MMC card operation
Insert a disc
DVD mode menu
On-screen cursor
Eject the disc
Play/Pause
Stop playback
Select a track
Fast forward/backward
Random track playback
Repeat
Repeat A - B
PBC (Playback Control)
Programming
Audio select
Title select
Subtitle select
View angle select
Zoom
PAL/NTSC select
Slow playback
Subtitle
Display
USB/Memory card operations
iPod operation
iPod mode menu
2 3
Table of contents Table of contents
19
19
19
19
20
20
20
20
21
21
21
21
21
22
23
Connecting an iPod
Playback control
DVD setup menu
System
Language
Video
Speaker setup
Digital setup
General information
Handling compact discs
Cleaning discs
Cleaning the unit body
Accessories
Troubleshooting guide
Specification
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you
will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
Utilization of the product
4
Before you start
Important safeguards
• Read carefully through the manual to
familiarize yourself with this unit.
• Keep this manual handy as a reference
for operating procedures and precautions. Do
not allow persons who have not read through
this manual to use this unit.
• “CLASS 1 LASER PRODUCT”
This product contains a laser diode of
higher class than 1. Laser beams from the
optical pickup are dangerous to the eyes. To
ensure continued safety, do not remove any
covers or attempt to gain access to the inside
of the product. Refer all servicing to qualified
personnel.
• Do not allow this unit to come into contact
with liquids. Electrical shock could result. Also,
damage to this unit, smoke, and overheating
could result from contact with liquids or dust.
Protect this unit from moisture.
• Make sure that foreign objects do not get
inside the unit; they may cause malfunctions,
or create safety hazards such as electrical
shock or laser beam exposure.
• The beginning of operation is the moment
of the unit installation. Before use the device
in winter it is recommended to heat up the
passenger compartment during 20 seconds or
to the operation temperature.
• Using the unit with the temperature that
goes beyond the operation temperature greatly
decreases the operation resource of the screen
and other components of the unit and can
result in an outage.
• Disconnect the vehicle’s negative battery
terminal while mounting and connecting the
unit.
• The unit is designed for negative
terminal of the battery, which is connected
to the vehicle metal. Please ensure it before
installation.
• When replacing the fuse, be sure to use
one with an identical amperage rating. Using a
fuse with a higher amperage rating may cause
serious damage to the unit.
• Do not allow the speaker wires to be
shorted together when the unit is switched
on. Otherwise it may overload or burn out the
power amplifier.
• Make sure you disconnect the power
supply and aerial if you will not be using
the system for a long period or during a
thunderstorm.
• Make sure you disconnect the power
supply if the system appears to be working
incorrectly, is making an unusual sound, has
a strange smell, has smoke emitting from it
or liquids have got inside it. Let a qualified
technician check the system.
• Always keep the volume low enough so
that you can hear sounds from outside the
vehicle.
• Should this product fail to operate
properly, contact your dealer or nearest service
center.
5
Installation/Connection
Installation
General notes
• Choose the mounting location where the
unit will not interfere with the normal driving
function of the driver.
• Before finally installing the unit, connect
the wiring and make sure that the unit works
properly.
• Consult with your nearest dealer if
installation requires the drilling of holes or other
modifications of the vehicle.
• Install the unit where it does not get in the
driver’s way and cannot injure the passenger if
there is a sudden stop, like an emergency stop.
• If installation angle exceeds 30° from
horizontal, the unit may not perform properly.
• Avoid installing the unit where it would
be subject to high temperature, such as from
direct sunlight, or from hot air, from the heater,
or where it would be subject to dust, dirt or
excessive vibration.
DIN Front/Rear-Mount
This unit can be properly installed either
from ‘Front’ (conventional DIN Front-mount) or
‘Rear’ (DIN Rear-mount installation, utilizing
threaded screw Holes at the sides of the unit
chassis). For details, refer to the following
illustrated installation methods.
1. DIN front-mount (Method A)
1. Car dashboard
2. Sleeve
3. Screw
4. Nut (5 mm)
5. Spring washer
6. Screw (5 х 25 mm)
7. Metal strap
8. Flat washer
3
2
1
182
53
1. Install the sleeve into the dashboard;
ensure it is installed with the correct side and
there are no obstacles (wires, dashboard
elements, etc) for the unit installation.
2. After installing the sleeve into the
dashboard, bend tabs fitting to the size of the
dashboard to fix the sleeve in place.
3. Use the metal strap to fix the rear side of
the unit. Determine a place for fixing and install
the strap as shown in the picture. You can bend
the strap to the needed angle with your hands.
4. Make the necessary wire connections.
Ensure the connections are correct.
5. Install the unit into the sleeve until the side
locks are fixed.
3
5
4
6
8
1
7
Dismantling the unit
a – Trim frame
b – Frame uninstall direction
c – Release key insertion
6
Installation/Connection
c
b
а
1. Switch off the unit and detach the front
panel.
2. Insert your fingers into the groove in the
front side of the trim frame (apply some effort to
detach the frame). Pull the frame to detach it.
3. Insert the supplied release keys into the
both sides of the unit body to click, as shown
in the picture. To extract the unit from the
dashboard, pull the release keys or the unit
body to pull it out. Before detaching the unit,
ensure it is not fixed with the metal strap.
Trim frame installation
To install the trim frame, press it to the unit
body and push it to fix it in place. This should
be done before installing the front panel;
otherwise you are not able to install the trim
frame. When the trim frame being installed,
the side with the groove should face down and
fixed first.
2. DIN rear-mount (Method B)
For this method, use the screw holes in the
lateral sides of the unit. Fix the unit with the
help of the factory radio mounting brackets.
1. Select a position in which the screw holes
of the brackets (3) are aligned with the screw
holes in the unit body, and screw in two screws
(2) in each side.
2. Screw.
3. Factory radio mounting brackets.
4. Vehicle dashboard.
5. Lock (remove this part).
The outer trim frame and mounting
sleeve are not used for method of installation.
2
2
5
5
4
3
Detachable control panel
Install the fastening on the left side of the
front panel on the left fastening hole of the unit.
After that, press on the right part of the panel
until a click. Ensure that the panel is properly
fixed, otherwise some errors may occur and
some buttons may not function.
To detach the front panel, press RELEASE
button, then distract the left side of the panel
from the fastening of the unit.
The control panel can easily be
damaged by shocks. After removing it, place
it in a protective case and be careful not to
drop it or subject it to strong shocks. The rear
connector that connects the main unit and the
control panel is an extremely important part. Be
careful not to damage it by pressing on it with
fingernails, pens, screwdrivers, etc.
If the control panel is dirty, wipe off the
dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the
socket on the back of the control panel.
Anti-theft system
The front panel of this unit can be stored in
the included protective case when not in used
and carried away when you leave the vehicle
to deter theft.
Switch off the power of the unit. Detach the
front panel, then put it to the protective case
and take it with you.
7
Installation/Connection
Parking wire connection
Parking brake lead
Brake light
Car frame
Battery
Pink Wire
If Parking cable is connected to hand brake switch, the video display of the monitor will be
controlled by driving status, system setup and input video sources. When the car is moving ahead, if
the video disc is played, the screen shows “WARNING!! Video viewing is not available while driving”,
and blank screen. The above warning screen will prevent the driver from watching images.
Reverse driving cable connection
Car frame
Car frame
Rear view video camera lead
Reverse driving light
Gearbox
Orange wire
Battery
If the rear view video camera is connected, the unit automatically switches to camera mode
during reverse driving. The unit returns to the original work mode after the reverse driving is done.
8 9
Installation/Connection Installation/Connection
Connection
Connection diagram
IPOD connector
Audio-video connector
ISO connector
Brake (Pink)
Amp. remote
(Blue/White)
Fuse 15 A
Fuse 1 A
Radio antenna inTV antenna in
Using the ISO Connector
1. If your car is equipped with the ISO
connector, then connect the ISO connectors as
illustrated.
1. 2.
2. For connections without the ISO
connectors, check the wiring in the vehicle
carefully before connecting, incorrect connection
may cause serious damage to this unit.
Cut the connector, connect the colored leads
of the power cord to the car battery as shown
in the colour code table below for speaker and
power cable connections.
8 9
Installation/Connection Installation/Connection
Location Function
Connector A Connector B
1 - Rear right (+) - Purple
2 - Rear right (-) - Purple/Black
3 - Front right (+) - Grey
4 Battery +12V/Yellow Front right (-) - Grey/Black
5 Power Antenna - Blue Front left (+) - White
6 - Front left (-) - White/Black
7 Ignition/Red Rear left (+) - Green
8 Ground/Black Rear left (-) - Green/Black
Power antenna wire is intended for
power supply of the antenna.
Audio-video connector table
Marking Group Description
FL - white
Adjustable
audio output for
5-channel amplifier
Front left RCA output
FR - red Front right RCA output
RL - white Rear left RCA output
RR - red Rear right RCA output
Subwoofer 1 Subwoofer RCA output 1
Subwoofer 2 Subwoofer RCA output 2
Line L
Line audio and
video output
Left line RCA output
Line R Right line RCA output
Video out Video RCA ouput. Video signal is only available in
DVD/USB/Card and TV modes.
RV-video
Back view camera
Input for back view camera signal
Reverse (pink) wire Camera mode activation
Video in
AUX input (video
and independent
audio)
Video input
AUX-L in Left audio input
AUX-R in Right audio input
10
Operation
Control elements
Front panel
1 2 3 4 5 6
7 8 9 10 11
1. SEL button/VOL knob
2. IR sensor
3. TFT display
4. MENU button
5. EQ/SYS button
6. TILT button
7. Mini USB port
8. AUX in jack
9. BAND/AST button
10. MUTE/LOUD button
11. RELEASE button
Not indicated: SD/MMC memory card slot (top
of the front panel)
Inner panel
1 2
1. RESET button (hole)
2. Connector
Pressing RESET hole will erase most of
your settings.
11
Operation
Remote controller (RC)
1. MUTE button
2. PWR/SRC button
3. Digit buttons
4. AUDIO button
5. MENU button
6. LOUD/EQ button
7. BAND button
8. RPOG button
9. PREV/NEXT buttons
10. RDM button
11. SLOW button
12. TITLE button
13. ZOOM button
14. SUB-T button
15. SETUP button
16. OPEN/CLOSE/P.ANGLE button
17. VOL+/- buttons
18. PBC/AST button
19. DISP button
20. SYS button
21. F.REV/F.FWD buttons
22. Cursor (
/ / / ) buttons
23. D.ANGLE button
24. STOP button
25. PLAY/PAUSE button
26. A-B button
27. REPEAT button
28. P/N button
29. ST button
Changing the battery
When the range of the operation of the
card RC becomes short or no functions while
operating, replace the battery with a new
lithium battery. Make sure the battery polarity
replacement is correct.
1. Open the back cover of the RC.
2. Insert the button-type battery with the
stamped (+) mark facing upward.
3. Close the back cover.
• Store the battery where children
cannot reach. If a child accidentally swallows
the battery, consult a doctor immediately.
• Do not recharge, short, disassemble or
heat the battery or dispose it in a fire.
• Do not expose or bring into contact the
battery with other metallic materials. Doing this
may cause the battery to give off heat, crack or
start a fire.
• When throwing away or saving the battery,
wrap it in tape and insulate; otherwise, the
battery may give off heat, crack or start a fire.
• The RC can operate within a distance of 3~5
m and the angle range of 30
0
to the IR sensor.
1
2
3
5
6
7
4
8
10
9
11 26
12 27
14 29
15
16
17
18
20
19
21
23
24
22
25
13 28
12 13
Operation Operation
General operations
Touch screen
Due to the touch screen, you can fulfill most
functions not only by pressing buttons but also
by touching the options you desired.
Turn on/off the power
Press PWR/SRC button on the RC or SEL
button on the panel to turn on the unit. When on,
press and hold this button to turn off the unit.
Mute
Press MUTE/LOUD button on the panel,
MUTE button on the RC or
icon on the
screen to cut the sound. Pressing again or
adjusting volume will release muting.
Adjust the volume
Press VOL+/- buttons on the RC or rotate
VOL knob on the panel to increase or decrease
the volume level. The adjustable range of
volume is 0 to 42.
Source selection
• Method 1: Press PWR/SRC button on the
RC or SEL button on the panel repeatedly to
cycle through available sources.
• Method 2: Open the Source Menu by
touching the mode icon in the top left corner
of the TFT or by pressing MENU button on the
panel, and then touch the option you need.
Touch MORE icon to switch between the 1st
and 2nd menu pages.
When some devices are not ready, the
corresponding mode is in grey and it cannot be
selected.
Panel tilt
• Press and hold TILT button on the panel
or OPEN/CLOSE/P.ANGLE button on the RC,
then press it repeatedly to adjust the tilt angle of
the front panel.
• Press TILT button on the panel or OPEN/
CLOSE/P.ANGLE button on the RC, to open
the front panel.
Calibration
Press and hold for several seconds “2“
digit button and BAND button on the RC
simultaneously to enter the calibration mode.
Touch the cross symbol in the place where it
will move after each pressing. After you press
it for the 5th time in the center of the screen,
“Calibration succeeded“ will be displayed.
Calibration is required when some
malfunction of touch screen occurs.
AUX in jack
AUX-in jack on the front panel is intended
for connecting an external audio equipment. If
connection is made correctly, the audio signal
from the external source will be translated
through the acoustics of the head unit. This
enables to adjust the volume and quality of the
sounding.
Loudness
Press and hold MUTE/LOUD button on the
front panel or LOUD/EQ button on the RC to
switch on or off the bass emphasizing function.
System setup
In the 2nd page of the Source Menu, touch
SYSTEM icon to enter the System setup menu.
Or press and hold EQ/SYS button on the panel
or SYS button on the RC to enter the System
setup menu. In the bottom part of the screen
6 setup pages are available: Screen, Sound,
Clock, Saver, Others and Def. Touch the
needed icon to enter the corresponding page.
12 13
Operation Operation
SCREEN
1 2 3 4 5
1. Contrast
2. Tint
3. UP/DOWN arrows
4. Color
5. Brightness
Touch UP/DOWN arrows to increase or
decrease each parameter of the screen (within
the range from -9 to 9).
SOUND
1 2 3 4
1. Balance/Fader: touch L and R icons to
adjust the balance between left and right
channels. Touch FRONT and REAR icons
to adjust the balance between front and rear
channels (from -9 to 9).
2. Buzzer: touch to turn on or off.
3. Treble (from -9 to 9).
4. Bass (from -9 to 9).
CLOCK
1 2 3 4
1. Current time display
2. Hour: press UP and DOWN arrows to adjust
hours.
3. Minute: press UP and DOWN arrows to
adjust minutes.
4. Time mode: touch to switch between 12-
hour and 24-hour modes.
SAVER
1 2 3 4 5 6
1. Capture image list: touch UP and DOWN
arrows to select an image captured from DVD/
USB/Memory card.
2. Desktop: touch to set the selected captured
image as desktop image.
3. Delete: touch to delete the selected image of
screen saver.
14
Operation
4. Add: touch to add the selected image of
captured images list as screen saver.
5. Screensaver image list: touch UP and DOWN
arrows to select an image of screensaver.
6. Screensaver time: touch to adjust the screen
saver time (3 min/5 min/never/30 s/60 s).
OTHERS
1 2 3 4
12
TA VOL
1. Radio area: touch LEFT/RIGHT arrows to
select a radio area Europe/Asia/USA/Japan/OIRT
2. Local/Distant: touch LEFT/RIGHT arrows to
select local or distant (DX) reception mode.
3. EQ: touch LEFT/RIGHT arrows to select
equalizre mode: USER/POP/CLASSIC/ROCK.
You can also press EQ/SYS button on the
front panel or LOUD/EQ button on the RC
repeatedly to select an equalizer mode.
4. TA VOL: adjust the default volume level for
Traffic Announccement broadcast.
DEFAULT
Touch to restore all settings to default values.
Radio operation
Radio Menu
Touch to access desired function:
1. Touch to call the saved station. Touch and
hold to save the current frequency.
2. Current frequency display
3. Select bands
4. Auto station tune
5. Local/distant (dx) reception
6. Frequency tune down
7. Frequency tune up
8. Stereo/Mono reception switch
9. Seek down
10. Seek up
1 2
3 4 5 6 7 8 9 10
Band select
In Radio mode, to select the needed radio
band press BAND/AST button on the panel or
BAND button on the RC repeatedly. You can
store 6 stations in each subband (FM1-FM2-
FM3-MW1-MW2).
Automatical/Manual search
After selecting a band, press and hold or
cursor button on the RC to start automatical
search of the nearest station with strong signal.
Press these buttons on the RC to change the
current frequency manually step by step.
Automatic store and scan
Press and hold BAND/AST button on the
panel or PBC/AST button on the RC. The unit
will automatically find and save 6 stronges
signal stations. After the operation is complete,
the unit will play each stations in the current
band for several seconds. Or you can press
PBC/AST button on the RC to start scanning.
Saving and calling stations
After the needed station is found, press
and hold a number button (1-6) on the RC to
15
Operation
save the station under corresponding number.
To call a saved station, press corresponding
number button on the RC.
Mono/stereo reception
Press ST button on the RC to switch
between stereo and mone reception modes.
RDS system (only for FM-radio in
Europe area)
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
Radio RDS Menu
1 32
4 5 6 7 8 9 10 11
Touch to access desired function:
1. Touch to call the saved station. Touch and
hold to save the current frequency.
2. Current frequency display
3. Frequency tune up/down (when PTY off).
Program type selection (when PTY off).
4. Select bands
5. Auto station tune
6. Traffic Announcement activation
7. PTY function activation
8. Regional function activation
9. RDS menu on/off
10. Seek down
11. Seek up
TA function
Some RDS FM stations periodically provide
traffic information.
TP (Traffic Program Identification)
Broadcasting of traffic information.
TA (Traffic Announcements Identification)
Radio announcements on traffic conditions.
The unit will tune to any station which is
broadcasting the Traffic Announcement.
While tuning, the letters “TP” are flickering
and the letters “TP SEARCH” are displayed
until the station is received. The letters “TA” are
displayed while broadcasting.
When TA function is activated, the unit will
automatically switch to broadcast the traffic
announcement when it comes under any
working mode, the letters ”TA” are displayed.
The unit will broadcast the Traffic
Announcement at TA volume; you can setup
the TA volume in System setup (“Others”).
REG (Regional) mode
• REG ON: AF function will implement the
regional code and only stations in the current
region can be tuned automatically.
• REG OFF: AF function will ignore the
regional code and stations in the other regions
can also be tuned automatically.
PTY (Program Type) function
When PTY mode is activated, current
program type and “PTY” letters are displayed
on the screen.
Press / buttons on the RC or on the
screen to select a program type: News, Affairs,
Info, Sport, Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, Easy music, Light M,
Classics, Other M, Weather, Finance, Children,
Social, Religion, Phone in, Travel, Leisure,
Jazz, Country, Nation M, Oldies, Folk M,
Document, Test, Alarm.
TV tuner operation
TV mode menu
Touch to access desired function:
1. Automatic tuning
16
Operation
4. NEXT button
5. Fast Forward
6. Play/Pause
7. Stop
1 2 3 4 5 6 7
Touch to access desired function (page 2):
1. Switch between 1 and 2 menu pages
2. Go to the disc menu
3. Cursor keyboard activation (while playback:
go to title menu)
4. Repeat playback
5. Playback information display
6. On-screen setup menu
7. Capture current image
1 2 3 4 5 6 7
Manufacturer guarantees regular
playback of licensed discs only. Some AVI files
cannot be played due to their parameters and
recording conditions. Video files more than 2 Gb
having AVI extension can be played partially.
2. Current channel number
3. Previous channel
4. Next channel
5. Seek channel down
6. Seek channel up
1 2 3 4 5 6
Automatic tuning
• Press and hold BAND/AST button on the
front panel or PBC/AST button on the RC.
The unit will perform automatic tuning of all
channels through the whole frequency band.
• Press
or cursor buttons on the
RC; the unit will search the nearest available
channel down or up the band.
• During auto tuning, the unit identifies
availability of signal on each of the 70 channels.
In case signal is unavailable on some channel,
this channel will be set for skipping to save the
user from listing empty channels.
Channel numbering cannot be changed.
Disc/USB/SD/MMC card operations
Insert a disc
Open the front panel. Insert a disc into the
slot, and the unit will change to disc mode
automatically.
DVD mode menu
Touch to access desired function (page 1):
1. Switch between 1 and 2 menu pages
2. Fast Reverse
3. PREVIOUS button
17
Operation
On-screen cursor
1 2
1. Move the cursor panel
2. Cursor panel
When the cursor keyboard is activated, you
can touch MOVE icon to select right or left
position of the cursor panel.
Eject the disc
Press TILT button on the panel or OPEN/
CLOSE/P.ANGLE button on the RC to slide
down the panel and eject the disc.
If the disc is not removed from the
unit within several seconds, the disc will be
reloaded to prevent accidental damage.
Play/Pause
Press PLAY/PAUSE button to start playback.
While playback press this button to pause
playback.
Stop playback
• During DVD/VCD/CD playback, press
STOP button once to stop playback, and the
stop point on the disc is saved. Press PLAY/
PAUSE button to resume the playback from the
saved point.
• Press STOP button twice to stop playback.
Press PLAY/PAUSE button to start playback from
the beginning of the disc.
Select a track
Press PREV/NEXT buttons to skip to the
next or previous track/chapter.
Fast forward/backward
• Press F.REV/F.FWD buttons repeatedly to
select the speed of fast backward or forward
track during playback: x2 => x4 => x8 => x20.
• During fast forward or backward operation,
press PLAY/PAUSE button for normal playback.
• During fast forward or backward operation,
the volume will be muted.
Random track playback
You can play all the tracks in random order.
During playback, press RDM button. Press the
button again to select normal playback.
Repeat
During playback, press REPEAT button
repeatedly to switch between repeat playback
modes:
• For VCD/CD: One => All => Repeat off.
• For DVD: Chapter => Title => All =>
Repeat off.
• For File disc: One => Directory => All =>
Repeat off.
Repeat A - B
• Press A-B button to select starting point of
the fragment to repeat.
• Press A-B button again to select ending
point of the fragment. Tthe selected fragment
starts to replay.
• Press A-B button again to cancel fragment
repeat.
PBC (Playback Control) (for VCD only)
If you use a VCD with PBC, playback
starts from the beginning of the 1st track
automatically. Press PBC/AST button to switch
on Playback Control function enabling you to
select tracks by using corsor buttons.
Programming
• Press PROG button to enter program list.
Use cursor buttons and digit buttons to enter
numbers. For DVD and File disc, select title
and chapter numbers; for VCD and CD, select
track numbers.
18
Operation
• Press PLAY/PAUSE button to play, or
move the cursor to select “PLAY” and press
BAND button to play.
• If you want to delete the list, move the
cursor to “CLEAR”, press BAND button to
delete all the list set before.
• Press PROG button again to exit program
play.
Audio select
For DVD, press AUDIO button to select
audio language to listen to if the DVD has
multiple audio languages.
Title select
Press TITLE button to display title or chapter
list, use cursor buttons to select, press BAND
or PLAY/PAUSE button to play.
Subtitle select
Press SUB-T button repeatedly to select
a subtitle language, if the DVD has multiple
subtitle langages.
View angle select
Press D.ANGLE button repeatedly to select
different angle to view, if the DVD has multiple-
angle views.
Zoom
Press ZOOM button repeatedly, the picture
will be zoomed accordingly: x2 => x3 => x4 =>
x1/2 => x1/3 => x1/4 => OFF. When the picture
is zoomed in, press cursor buttons to move the
picture.
PAL/NTSC select
When playing a DVD disc, press P/N button
to select PAL, NTSC or Auto systems.
Slow playback
Press SLOW button repeatedly to select the
slow playback speed: 1/2 => 1/3 => 1/4 =>
1/5 => 1/6 => 1/7 => Normal playback. During
slow playback, press PLAY/PAUSE button for
normal playback.
Display
Press DISP button repeatedly to display
various information on current playback, such
as title/chapter/track number or time elapsed/
remaining/total etc.
USB/Memory card operations
• Insert an SD/MMC card into the card
slot, the unit will switch to SD CARD mode
automatically. To remove the card, you
should first select another mode, in order to
avoid damaging the card, then press the card
slightly, and take off the card after it popps out.
• Connect your USB device to the USB port
using the USB extension cable included. When
connecting a USB device, the unit will switch to
USB mode automatically. To remove the USB
device, you should first select another mode, in
order to avoid damaging the USB device.
• All operations with files contained in the
SD/MMC card or USB device are the same as
in DVD mode.
USB format supports 2.0 version.
Capacity: up to 16 Gb.
For correct and satisfactory operation,
licensed SD/MMC memory cards of famous
brands should be used with this unit. Avoid
using memory cards of unknown brands.
Capacity: up to 16 Gb.
iPod operations
iPod mode menu
Touch to access desired function:
1. PREVIOUS button
2. NEXT button
3. Play/pause
4. Video/Music page access
19
Operation
1 2 3 4
Connecting an iPod
Connect an iPod to the iPod connector using
an extension cable (not included). The unit will
automatically switch to iPod mode.
Playback control
• In the Music page, you cannot perform
playback control using the iPod itself. You can
use the buttons of the multimedia receiver and
the RC to control the playback. All operations
are the same as in DVD mode.
• In the Video page, video file playback is
performed via the iPod controllers. The video
image will be available for vieweing on the
screen of this unit.
DVD setup
Press SETUP button on the RC to display
setup screen, use
/ cursor buttons and
BAND button to select the desired setup page:
System, Language, Video, Speaker, Digital. In
the selected page select an option using /
cursor buttons, then press
cursor button to
go to setting list. Use / cursor buttons to
select the needed setting. Press BAND button
to confirm.
The on-screen menu pictures are given
in this Manual only for reference and may differ
from actual image in your unit.
System
SYSTEM SETUP
TV SYSTEM
POWER RESUME
TV TYPE
PASSWORD
RATING
DEFAULT
• TV system: NTSC/PAL/AUTO. Select the
output video format in the setting menu.
• Power resume: ON/OFF. Enable or disable
the function of memorizing the playback point
when stopping playback.
• TV type: Select TV type to watch wide
screen movies.
4:3 PS: For 4:3 TV, left and right edges will
be cut.
4:3 LB: For 4:3 TV, black bars will appear on
top and bottom.
16:9: For 16:9 wide screen TV.
• Password:
Press number buttons “0000“ on the RC,
then press BAND button to confirm. Enter the
desired 4-digit password, and then press BAND
button to confirm. Record the password and
keep it in a safe place for future reference.
If you forget the password, please enter
0000 to reset a new password.
• Rating:
The control level is for parents to control
playing content and protect your children from
violence and erotic. The disc, the level of which
is higher than the setting level can not be played.
Original setting: 8.
The rating can be selected only under the
password unlocked status, and the limits can be
worked only under the password locked status.
• Default: RESTORE. If this item is selected,
the unit will return to original setting.
20 21
Operation General information
Language
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANGUAGE
SUBTITLE LANGUAGE
MENU LANGUAGE
• OSD Language
Select a language of system menu.
• Audio Language
Select a dialogue language when playing
DVDs (if available). You can also change the
language by pressing AUDIO button on the RC.
• Subtitle Language
Select a language of DVD subtitles (if
available). You can change the language by
pressing SUB-T button on the RC.
• Menu Language
Select a language of DVD menu.
Video
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
In this page you can set Brightness, Contrast,
Hue, Saturation and Sharpness of the video
image. Press / cursor buttons to adjust the
selected parameter.
Speaker setup
SPEAKER SETUP
DOWNMIX
FRONT
• Downmix:
LT/RT: The audio out is Left and Right
channels format even if the original sound is
5.1 CH format.
Stereo: The audio out format is stereo even
if the original sound is 5.1 CH format.
Vss: The audio out is virtual surround
sounds (only for 5.1 CH player).
• Front: large/small
Digital setup
DIGITAL SETUP
OP MODE
DYNAMC RANGE
DUAL MONO
• OP mode:
Line out: Compress the input signal. The
volume is small.
RF remod: The volume is large.
• Dynamic range
When you select compressed mode as
“line out”, select it to adjust the compression
proportion and get different compressed effect.
When FULL, the audio signal is minimum;
when select OFF, the audio signal is maximum.
• Dual mono
Select the audio channel from STEREO,
MONO L, MONO R and MIX MONO.
1 / 1

Hyundai H-CMD4021 Руководство пользователя

Категория
Видеосистемы для автомобилей
Тип
Руководство пользователя

Задайте вопрос, и я найду ответ в документе

Поиск информации в документе стал проще с помощью ИИ

Спросите документ

на других языках