Yamaha CDC-697 Инструкция по применению

UAB

CDC-697

COMPACT DISC AUTOMATIC CHANGER

OWNER’S MANUAL

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert you to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert you to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete

outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or when

unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

V843150

IMPORTANT!

Please record the serial number of this unit in the space

below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to

wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES–003.

POUR LES CONSOMMATEURS CANADIENS

Pour éviter les chocs électriques, introduire la lame la

plus large de la fiche dans la borne correspondante de la

prise et pousser jusqu’au fond.

Cet appareil numérique de la classe B est conforme à la

norme NMB–003 du Canada.

01_En_01_cau-CDC-697_UAB.p65 7/12/06, 13:222

iii

English

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved

by Yamaha may void your authority, granted by the

FCC, to use the product.

2. IMPORTANT: When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could void

your FCC authorization to use this product in the

USA.

3. NOTE: This product has been tested and found to

comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result in

harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and,

if not installed and used according to the instructions

found in the users manual, may cause interference

harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If this

product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”,

please try to eliminate the problem by using one of the

following measures:

Relocate either this product or the device that is being

affected by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient

the antenna. If the antenna lead-in is 300 ohm ribbon

lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to

distribute this type of product. If you can not locate the

appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its

subsidiaries.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out

of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without

annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing

damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries

Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume

levels.

For U.K. customers

If the socket outlets in the home are not suitable for the plug

supplied with this appliance, it should be cut off and an appropriate

3 pin plug fitted. For details, refer to the instructions described

below.

Note:

The plug severed from the mains lead must be destroyed, as a plug

with bared flexible cord is hazardous if engaged in a live socket

outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L or

coloured RED. Making sure that neither core is connected to

the earth terminal of the three pin plug.

01_En_01_cau-CDC-697_UAB.p65 7/12/06, 13:223

Getting Started

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

20 VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit must

be set for your local main voltage BEFORE plugging into the AC

wall outlet. Voltages are 110/120/220/230–240 V AC, 50/60 Hz.

The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

Caution for moving this unit

•When moving this unit, first remove all discs from the disc tray

and close the try by pressing the OPEN/CLOSE button, and

then switch off the power after you confirm that the front panel

display indicates as follows.

Never switch off the power if the front panel display is not

pictured as above, otherwise the unit will break down during

moving because the internal mechanism is not locked.

This unit is not disconnected from the AC power source as long

as it is connected to the wall outlet, even if this unit itself is

turned off. This state is called the standby mode. In this state,

this unit is designed to consume a very small quantity of power.

DANGER

When this unit is plugged to the wall outlet, do not place your

eyes close to the opening of the disc tray and other openings to

look into inside.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

Laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

1To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

Install this sound system in a well ventilated, cool, dry, clean place

with at least 10 cm on the top, 10 cm on the left and right, and 10

cm at the back of CDC-697 — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

3 Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in an environment with

high humidity (i.e. a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign object may fall onto this

unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

- Other components, as they may cause damage and/or

discoloration on the surface of this unit.

- Burning objects (i.e. candles), as they may cause fire, damage

to this unit, and/or personal injury.

- Containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to this

unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.

in order not to obstruct heat radiation. If the temperature inside

this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

7 Do not plug in this unit to a wall outlet until all connections are

complete.

8 Do not operate this unit upside-down. It may overheat, possibly

causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp

the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit

with a higher voltage than specified is dangerous and may cause

fire, damage to this unit, and/or personal injury. YAMAHA will

not be held responsible for any damage resulting from use of

this unit with a voltage other than specified.

13 Do not attempt to modify or fix this unit. Contact qualified

YAMAHA service personnel when any service is needed. The

cabinet should never be opened for any reasons.

14 When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

15 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit is

faulty.

16 Before moving this unit, press POWER ON/OFF to release it

outward to the OFF position to turn off this unit, and then

disconnect the power cable from the AC wall outlet.

17 Condensation will form when the surrounding temperature

changes suddenly. Disconnect the power cable from the outlet,

then leave the unit alone.

18 When using the unit for a long time, the unit may become

warm. Turn the power off, then leave the unit alone for cooling.

19 Install this unit near the wall outlet and where the AC power

plug can be reached easily.

2345

iii

01_En_01_cau-CDC-697_UAB.p65 7/12/06, 13:224

English

GETTING STARTED

PLAYING CDS

FUNCTIONS FOR

RECORDING

ADDITIONAL

INFORMATION

ENGLISH

Features

● 5-Discs Carousel Auto-changer

● Full Opening Disc Tray for Changing 5 Discs at a Time

● PLAYXCHANGE; Disc Changing Capability while Playing back Another

● Repeat, Random and Program Play

● Remote Control Capability

Introduction

Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the

best performance, read this manual carefully. It will guide you in operating your YAMAHA product.

Contents

GETTING STARTED

CD PREVENTIVE CARES .................... 2

PREPARATIONS ............................. 3

Supplied Accessories .......................................... 3

Remote Control Transmitter ................................ 3

Connecting to an Amplifier .................................. 4

Connecting the AC power cable .......................... 5

CONTROLS AND FUNCTIONS ............. 6

Front Panel .......................................................... 6

Remote Control Transmitter ................................ 7

Display ................................................................ 8

PLAYING CDS

BASIC OPERATION .......................... 9

Turning On and Off the Power ............................. 9

Loading and Playing Discs .................................. 9

PLAYXCHANGE ................................................. 10

Scanning Discs ................................................. 10

Skipping Tracks ................................................. 11

Searching .......................................................... 11

CD TEXT ............................................................ 11

VARIOUS FUNCTIONS ..................... 12

Random Sequence Play .................................... 12

Program Play .................................................... 13

Repeat Play ....................................................... 15

Index Search ..................................................... 15

Adjusting the Level............................................ 16

Timer Play ......................................................... 16

FUNCTIONS FOR RECORDING

CD SYNCHRONIZED RECORDING ........ 17

TRACK PROGRAMMING

FOR RECORDING...........................

Automatic Tape Programming ........................... 18

Manual Tape Programming ............................... 19

Random Tape Programming ............................. 21

AUTOMATIC PEAK LEVEL SEARCHING ....

ADDITIONAL INFORMATION

TROUBLESHOOTING ....................... 23

SPECIFICATIONS ........................... 24

01_En_02_star_CDC-697_UAB.p65 7/13/06, 13:201

• This compact disc player is designed only for playing

back compact discs bearing the marks shown below.

Never attempt to load any other type of disc into the unit.

The unit can also play back 8 cm (3 inch) compact discs.

Notes

•This unit may not be able to play back some CD-R/CD-RW

discs or discs on which recording was not made correctly.

•This unit is not compatible with a CD-R/CD-RW disc

recorded with MP3 or WMA format.

• Compact discs are not subjected to wear during

playback, but damage to the disc surface when the disc is

being handled can adversely affect the disc playback.

• Do not use cleaning discs or warped discs. All of these

could damage the unit.

To prevent a malfunction of this unit

• Do not use any non standard shaped CD (heart, etc.)

available on the market, because it may damage the unit.

• Do not use a CD with tape, seals, or paste on it, because

damage to the unit may result.

• Compact discs are not affected by small particles of dust

or fingerprints on their playing surface, but even so they

should be kept clean. Wipe by using a clean, dry cloth.

Do not wipe with a circular motion; wipe straight

outward from the center.

• Do not try to clean the disc’s surface by using any type

of disc cleaner, record spray, anti-static spray or liquid,

or any other chemical-based liquid, because such

substances might irreparably damage the disc’s surface.

• Do not expose discs to direct sunlight, high temperature

or high humidity for a long period of time, because these

might warp or otherwise damage the disc.

CD PREVENTIVE CARES

No!

01_En_02_star_CDC-697_UAB.p65 7/12/06, 13:222

GETTING STARTED

English

■ Battery installation

■ Battery replacement

If you find that the remote control transmitter must be used

closer to the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

• Use only AA, R6, UM-3 batteries for replacement.

• Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

• Remove the batteries if the remote control transmitter will not

be used for an extended period of time.

• If batteries leak, dispose of them immediately. Avoid

touching the leaked material or letting it come in contact with

clothing, etc. Clean the battery compartment thoroughly

before installing new batteries.

PREPARATIONS

Supplied Accessories

Remote Control Transmitter

■ Remote control transmitter

operation range

Notes

•There should be no large obstacles between the remote

control transmitter and the main unit.

• If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp, etc.),

it might cause the remote control transmitter not to work

correctly. In this case, reposition the main unit to avoid direct

lighting.

NATURAL SOUND COMPACT DISC PLAYER CDC-697

DISC

12345

STANDBY

/ON

POWER

ON OFF

PLAYXCHANGE

30°

Remote control sensor

Within approximately

6 m (19.7 feet)

SYNCHRO

DIMMER

STANDBY/ON

PEAK

PROGCLEARTAPE

321

654

987

INDEX+100

OUTPUT LEVEL

MODE

DISC SCAN

REPEAT

CDC8

WH26170

RANDOM

DISC SKIP

OPEN/

TEXT/

TIME

Remote Control Transmitter Batteries (AA, R6, UM-3) x 2

Audio Pin Cable

Power cable

(U.S.A., Canada, Australia, U.K. and

Europe models) The shape of the

plug may vary depending on the area

where you purchased.

01_En_02_star_CDC-697_UAB.p65 7/12/06, 13:223

Connecting an Amplifier

Never plug in this unit and other components until all connections are completed.

• Before making any connections, switch OFF the power to the unit and the amplifier or other components.

• Connections should be made to the correct input terminals of the amplifier or other components.

• If the placement of this unit causes noise in other equipment, such as a tuner, separate them from each other.

Choose one of the ways listed below to connect this unit to your amplifier.

■ When the LINE OUT (analog) terminals of this unit are used (1)

• Be sure that the left (L) and right (R) LINE OUT terminals are connected to the corresponding (left and right) terminals of

the amplifier or other components.

• Connect the LINE OUT terminals to the CD (or AUX) terminals of the amplifier. For additional details concerning these

connections, refer to the operation instructions for the amplifier being used.

■ When the DIGITAL AUDIO OUT (OPTICAL) terminal of this unit is used (2)

• Before using this terminal, remove the terminal cover by pulling it.

• Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available

optical cable.

* Be sure to use a high quality optical fiber cable. Other cables might not function correctly.

• Be sure to attach the terminal cover when this terminal is not being used in order to protect the terminal from dust.

• Set the level of signals output into an amplifier to max by using the OUTPUT LEVEL –/+ buttons.

For Custom Installer

■ REMOTE CONTROL IN/OUT terminals

These terminals are used for custom installation system. When this unit is connected to the components for custom

installation system, you can operate this unit with the system remote control.

Connect the REMOTE CONTROL IN terminal of this unit to the output terminal of the central controller for custom

installation system.

By connecting the REMOTE CONTROL OUT terminal of this unit to the REMOTE CONTROL IN terminal of the

other component, you can also operate it with the system remote control. In this way, up to 6 components can be

connected in series.

■ RS-232C terminal

This terminal dose not support normal external component connection. This is an expansion terminal for factory use

only.

LINE OUT

RS-232C

DIGITAL AUDIO OUT

OPTICAL

OUTIN

REMOTE CONTROL

VOLTAGE SELECTOR

230-

240V

R L

DIGITAL IN

ANALOG IN

OPTICAL

R L

LINE OUT

DIGITAL AUDIO OUT

OPTICAL

PREPARATIONS

REMOTE CONTROL IN/OUT terminals

2 Optical cable

(not included)

1 Audio pin cable

(included)

Amplifier

RS-232C terminal

(General model)

01_En_02_star_CDC-697_UAB.p65 7/12/06, 13:224

GETTING STARTED

English

Connecting the power cable

After all other connections are completed, plug the power cable to an AC wall outlet.

■ VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the

AC main supply. Voltages are AC 110/120/220/230–240 V, 50/60 Hz.

AC IN

• China, Asia and General models

• Other models

Plug the power cable into the AC IN, then plug the power

cable to an AC wall outlet.

To AC wall outlet

VOLTAGE SELECTOR

230-

240V

PREPARATIONS

01_En_02_star_CDC-697_UAB.p65 7/12/06, 13:225

CONTROLS AND FUNCTIONS

Front Panel

NATURAL SOUND COMPACT DISC PLAYER CDC-697

DISC

12345

STANDBY

/ON

POWER

ON OFF

231

45 6789

0qw

PLAYXCHANGE

7 Remote control sensor .......................................P.3

8 t/e (Skip/Search) ...................................... P.11

9 r/y (Skip/Search) ...................................... P.11

0 w/d (Play/Pause) ............................................. P.10

q a (Stop) ........................................................... P.10

w PLAYXCHANGE ........................................... P.10

1 POWER ............................................................ P.9

2 Disc tray ............................................................. P.9

3 f (Open/Close) ..................................................P.9

4 STANDBY/ON ................................................. P.9

5 DISC-select ..................................................... P.10

6 Display panel ..................................................... P.8

01_En_02_star_CDC-697_UAB.p65 7/12/06, 13:226

GETTING STARTED

English

Remote Control Transmitter

SYNCHRO

DIMMER

STANDBY/ON

PEAK

PROGCLEARTAPE

321

654

987

INDEX+100

OUTPUT LEVEL

MODE

DISC SCAN

REPEAT

CDC8

WH26170

RANDOM

DISC SKIP

OPEN/

TEXT/

TIME

1 STANDBY/ON ................................................. P.9

2 SYNCHRO .....................................................P.17

3 DIMMER ........................................................... P.8

4 TEXT/TIME ....................................................... P.8

5 TAPE ............................................................... P.18

6 Numeric buttons ............................................... P.11

7 Disc play MODE-select ..................................... P.9

8 DISC SCAN ...................................................P.10

9 d (Pause) .......................................................... P.10

0 REPEAT.......................................................... P.15

q w (Play) ............................................................ P.10

w t (Skip) ......................................................... P.11

e a (Stop) ........................................................... P.10

r e (Search) ..................................................... P.11

t OPEN/CLOSE ................................................. P.9

y PEAK .............................................................. P.22

u PROG .............................................................. P.13

i CLEAR ............................................................ P.14

o INDEX ............................................................. P.15

p OUTPUT LEVEL –/+ .................................... P.16

a DISC SKIP .....................................................P.10

s RANDOM .......................................................P.12

d y (Skip) ......................................................... P.11

f r (Search) ..................................................... P.11

CONTROLS AND FUNCTIONS

01_En_02_star_CDC-697_UAB.p65 7/12/06, 13:227

The display located in the center of this unit provides

information about discs.

After closing the disc tray by pressing the OPEN/CLOSE

button or selecting any disc by using the DISC SKIP

buttons when this unit is stopped, the display shows the total

number of tracks and the total recorded time of the selected

disc for a few seconds.

■

Display information at disc playback

1 Encloses the tray number of the selected disc.

2 The numbers corresponding to trays that contain discs

light up after discs are selected.

3 Shows the selected track number.

4 Shows the time displays. (For details, refer to “Selecting

time displays and the text data” on the right column.)

5 Displays the numbers that correspond to the numbers of

the tracks (as high as number 20) on the selected disc.

After each track is played back, its corresponding

number disappears so the number of remaining tracks

(and their numbers) can be seen at a glance.

6 Shows the level of signals output into an amplifier

adjusted by using the OUTPUT LEVEL –/+ buttons.

■ Changing brightness of the display

If desired, you can change brightness of the display in three

degrees by pressing the DIMMER button.

1 Elapsed time of the track now playing back

2 2:35

1 2345

5DISCS

2345

678910

11 12

2- 1:02

1 2345

5DISCS

2345

678910

11 12

TOTAL -32:27

1 2345

5DISCS

2345

678910

11 12

TOTAL 38:14

1 2345

5DISCS

2345

678910

11 12

CONTROLS AND FUNCTIONS

Display

Notes

• The remaining time 2 will not be displayed if the track

number is 21 or higher.

• The disc title, artist names, or track names may not be

displayed with some CD TEXT discs. In this case,

“NO ENTRY” appears in the display.

when playing back a disc without CD TEXT

2 Remaining time of the track now playing back

3 Total disc playback time

4 Total remaining time on the disc

■ Selecting time displays and the text

data

You can select any of the four time displays by pressing the

TEXT/TIME display mode-select button. Since this unit is

CD TEXT compatible, the disc title, artist name, and track

name are also displayed in addition to the time displays

when playing back a CD with CD TEXT. Each time you

press the TEXT/TIME display mode-select button, the

display changes as follows.

12 53:38

12345

5DISCS

12345

678910

11 12

3 0:08

1 2345

5DISCS

345

678910

11 12

12 5

643

DIMMER

Disc title

Artist name

Track name

when playing back a CD TEXT disc

TEXT/

TIME

01_En_02_star_CDC-697_UAB.p65 7/12/06, 13:228

English

PLAYING CDS

2 Close the disc tray.

•You can also close the disc tray by pressing the w/d

button on the front panel, a DISC-select button on

the front panel, a numeric button or the RANDOM

button, or by pressing the front edge of the disc tray

gently. If the tray is closed in these ways, playback

will start automatically, however, the display will not

show the total number of tracks and the total

recorded time of the first selected disc.

Loading and Playing Discs

1 Open the disc tray and load discs.

Use the disc guides to align the discs correctly in the

tray.

To play back an 8 cm (3 inch) CD, place it in the inner

recessed area of the disc tray. Do not put a normal

(12 cm (5 inch)) CD on top of an 8 cm CD.

This manual describes how to operate this unit by using the

remote control transmitter.

To operate this unit on the front panel, use the

corresponding buttons on the front panel.

Turning On and Off the Power

■ To turn on this unit

Press the POWER button inward to the ON position.

•Press the STANDBY/ON button to set this unit to

the standby mode.

•Press the STANDBY/ON button to turn on this unit.

Note

You can operate this unit only when the POWER button is

pressed inward to the ON position.

■ To turn off this unit

Press the POWER button again to release it outward to the

OFF position.

BASIC OPERATION

OPEN/

On the front panel

Label side upward

Disc tray

OPEN/

POWER

ON OFF

STANDBY

/ON

STANDBY

/ON

STANDBY/ON

On the front panel

On the remote control

transmitter

On the remote control

transmitter

NATURAL SOUND COMPACT DISC PLAYER CDC-697

DISC

1 2345

STANDBY

/ON

POWER

ON OFF

STANDBY/ON

POWER

SYNCHRO

DIMMER

STANDBY/ON

PEAK

PROGCLEARTAPE

OPEN/

TEXT/

TIME

PLAYXCHANGE

POWER

ON OFF

On the front panel

DISC SCAN

REPEAT

CDC8

WH26170

RANDOM

DISC SKIP

SYNCHRO

DIMMER

STANDBY/ON

PEAK

PROGCLEARTAPE

321

654

987

INDEX+100

OUTPUT LEVEL

MODE

DISC SCAN

REPEAT

RANDOM

DISC SKIP

OPEN/

TEXT/

TIME

1,2

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:229

■ To stop playback temporarily

To resume playback, press the d button again (or press the

w button).

*The w/d button on the front panel can also be used to

stop playback temporarily or to resume playback.

■ To stop playback completely

PLAYXCHANGE

During playback, you can open the disc tray by pressing the

PLAYXCHANGE button on the front panel without

interrupting disc playback. However, in this case, pressing

the DISC SKIP buttons has no effect. You can load or

replace discs on the trays when the disc tray is opening,

however, never load a disc on the tray hidden inside the unit.

If doing so, the disc and the unit may be damaged, because

the tray already has a disc, which is being played back.

Scanning Discs

■ This mode is convenient to search

for a desired disc (or to check discs

on the disc tray)

When the DISC SCAN button is pressed in stop mode, this

unit will play back a section of each disc in turn for 8

seconds.

If, during this playback, you find a disc that you want to

listen to, press the DISC SCAN button once again or press

the w button to cancel this function. The unit will enter into

the normal playback mode.

Notes

• During this playback, the disc tray numbers blink in the

display. Every time the playback of a disc is finished, the

corresponding tray number is changed from flashing to

lighting.

• If the disc being played back has a long blank space between

tracks, you will hear no sound during disc scan.

On the front panel

DISC SCAN

3 Select a desired disc play mode (1DISC or

5DISCS) confirming it on the display.

“1DISC” mode: The unit will play back a

designated disc only.

“5DISCS” mode: The unit will play back all discs on

the tray in sequence.

4 Start playback from the first track of the disc 1.

* If necessary, select a desired disc by using the

DISC SKIP buttons, or a DISC-select button on the

front panel.

MODE

1DISC

5DISCS

TITLE

REP R

ARTIS

DISC SKIP

DISC

On the front panel

Shows the selected disc mode.

Playback will automatically

start.

On the remote control

transmitter

On the remote control

transmitter

On the remote control

transmitter

BASIC OPERATION

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:2210

English

PLAYING CDS

Skipping Tracks

■ To play back from the beginning of

the track following the one now

playing back

■ To play back from the beginning of

the track now playing back

■ To play back from the beginning of

the track before the one now

playing back

• These operations can also be performed when the unit is

paused or stopped.

•When using the t or y button on the remote control

transmitter:

* If the button is pressed and held, the track number is

continuously changed to higher numbers (or lower

numbers).

■ DIRECT PLAY

Select a desired track by using the numeric buttons.

Example: To select track 25

Press +10 twice, then immediately press 5 once.

* If a track number higher than the highest track number

on the disc is selected, the last track on the disc will be

played back.

Searching

■ To go forward rapidly

■ To go backward rapidly

•The sound can be heard (although slightly garbled)

during manual search in either direction. This is

convenient for locating a precise position within a track,

or for reviewing the contents quickly.

• Manual search can also be performed while disc

playback is paused. In this case, no sound will be heard.

CD TEXT

This unit is compatible with the CD TEXT function. The

CD TEXT disc has information, such as the disc title, artist

names, and track names. If the current disc is a CD TEXT

disc, the unit reads the disc title, artist name, and track

names from the disc. You can display the CD TEXT data

(see “Selecting time displays and the text data” on page 8).

(Twice)

1 2 3 4 5

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST EDIT FILE

SFPROG CD- TEXT

ARTIST TRACK

12345

678910

11 12 13 14 15

16 17 18 19

The selected track number is displayed.

(Press and hold.)

—

BASIC OPERATION

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:2211

VARIOUS FUNCTIONS

Random Sequence Play

You can play back the tracks on one or more discs in a

random sequence. The unit will automatically mix up tracks

from all discs or a designated disc on the disc tray.

1 Load one or more discs.

2 Close the disc tray.

3 Select a desired disc play mode (1DISC or

5DISCS).

* If you select “1DISC” mode, next select a desired

disc by using the DISC SKIP buttons on the remote

control transmitter or a DISC-select button on the

front panel.

4 Press the RANDOM button.

“RNDM” lights up in the display.

■ To cancel random-sequence play

Press the a button or RANDOM button once again, or open

the disc tray by pressing the OPEN/CLOSE button.

“RNDM” disappears from the display.

Notes

• This feature will not function during programming, or during

program play.

• If the y button is pressed during random-sequence play, the

next randomly programmed track will be played back. If the

t button is pressed, playback will return to the beginning of

the track now being played back.

• This indication appears while the unit is mixing up tracks.

•Total remaining time on the disc will not be displayed during

random-sequence play.

DISC SCAN

REPEAT

CDC8

WH26170

RANDOM

DISC SKIP

SYNCHRO

DIMMER

STANDBY/ON

PEAK

PROGCLEARTAPE

321

654

987

INDEX+100

OUTPUT LEVEL

MODE

DISC SCAN

REPEAT

RANDOM

DISC SKIP

OPEN/

TEXT/

TIME

1,2

OPEN/

MODE

RANDOM

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:2212

English

PLAYING CDS

Program Play

You can enjoy listening to your favorite tracks selected from

one or more discs in any desired order by programming

tracks.

1 Stop the unit.

2 If you will select tracks from a disc (or discs)

other than the disc on the Disc 1 tray, make this

unit display the total recorded time of each disc

to be used by pressing the DISC SKIP buttons

in turn.

*Without this operation, the total time of the

programmed tracks will not be displayed during

programming.

3 Press the PROG button to start programming.

4 If necessary, select a desired disc.

5 Program a desired track by pressing the

corresponding numeric button.

6 Repeat steps 4 and 5 to program more tracks.

You can select the same track again.

7 When the programming is completed, start the

playback.

DISC SCAN

REPEAT

CDC8

WH26170

RANDOM

DISC SKIP

SYNCHRO

DIMMER

STANDBY/ON

PEAK

PROGCLEARTAPE

321

654

987

INDEX+100

OUTPUT LEVEL

MODE

DISC SCAN

REPEAT

RANDOM

DISC SKIP

OPEN/

TEXT/

TIME

2,4

DISC SKIP

STEP 1

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST EDIT

SFPROG CD- TEXT

ARTIST TRACK

11 12

16 17

DISC SKIP

DISC

On the front panel

PROG

—

On the remote control

transmitter

VARIOUS FUNCTIONS

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:2213

■ Display information during

programming

1 Shows the program number for the track to be

programmed next.

2 Shows the selected disc and track number.

3 Shows the total time of the tracks currently

programmed.

4 Shows only the numbers of programmed tracks on the

selected disc.

* If “STEP 1” does not appear on the display after the

PROG button is pressed, press the TEXT/TIME display

mode-select button.

* If the total time exceeds 99 minutes and 59 seconds, the

time will not be displayed.

Notes

•You can program as many as 40 tracks at one time.

•You can program a whole disc by pressing “0”, instead of one

track. At that time, “ALL” lights up in the display.

• The total time of the programmed tracks will not be

displayed, if a track number higher than 20 is programmed.

• If, during programming, the TEXT/TIME display mode-

select button is pressed, the program number display can be

changed to display the total time of the programmed tracks or

no information. To return to the previous display, press the

TEXT/TIME display mode-select button once again.

•The t and y buttons can be used during playback, but

only within the range of the programmed tracks.

•Pressing a numeric button stops the current program and

skips to the beginning of the track of the number pressed.

Once that track has finished playback, the previously

interrupted program resumes playback.

•The e and r buttons can be used during playback to

search all tracks, including unprogrammed tracks.

■ To stop program play

Press the a button. The first programmed track number will

be displayed.

To resume playback, press the w button. Playback will start

from the beginning of the program.

■ To cancel a programmed sequence

There are several methods, as described below.

•Press the a button or the CLEAR button while the unit

is stopped.

• Open the disc tray.

•Press the STANDBY/ON button.

• Switch off the power.

■ To check program data

1 During program play, press the a button.

2 Press the PROG button.

3 Each time the y button is pressed, the track numbers

and sequential order of the programmed tracks can be

checked one after another. The display of the track

number can be returned (sequentially in reverse order) by

pressing the t button.

■ To correct program data

1 Follow the procedure described in “To check program

data”.

2 Display the track number to be corrected by pressing the

t or y button.

3 Press a numeric button to select a track to replace the one

displayed. The previously programmed track will be

cleared from the memory and the new one will be

programmed.

4 After the correction has been completed, press the

PROG button or w button once again.

-- STEP 1

1 2 3 4 5

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST EDIT FILE

SFPROG CD- TEXT

ARTIST TRACK

12345

678910

11 12 13 14 15

16 17 18 19 20

-6 STE 3:25

1 2 3 4 5

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST EDIT FILE

SFPROG CD- TEXT

ARTIST TRACK

12345

6 789

11 12 13 14 15

16 17 18 19 20

VARIOUS FUNCTIONS

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:2214

English

PLAYING CDS

Repeat Play

You can play back any desired track or disc (or a set of

discs) repeatedly by pressing the REPEAT button. The

repeat play mode will change whenever you press the

REPEAT button.

■ REP S (Single repeat)

A single track is repeatedly played back.

*This is also available in the program play mode and the

random-sequence play mode. (If the repeat play mode is

switched off, the program play mode or the random-

sequence play mode will be resumed.)

■ REP F (Full repeat)

In the “1DISC” disc play mode: A designated disc is

repeatedly played back.

In the “5DISCS” disc play mode: All discs on the disc tray

are repeatedly played back.

* In the program play mode, all programmed tracks are

repeatedly played back.

* In the random-sequence play mode, all randomly

sequenced tracks on a designated disc (1DISC) in the

same order, or all randomly sequenced discs and tracks

(5DISCS) are repeatedly played back.

Index Search

If the disc includes index numbers, playback can be started

from any desired index number.

1 Select a track which has index numbers.

2 Press the INDEX button.

3 Select the desired index number.

■ To cancel the index search function

Press the INDEX button.

Notes

• Not all discs have index numbers. The index system has a

method for sub-dividing tracks into smaller divisions (for

example, the movements within classical symphonies) for

easier location of those parts. The liner notes with the disc

usually tell if such index numbers are included.

• If an index number is selected that is higher than any index

number on that disc, playback will start from the last index

number point on the disc.

•For some discs, playback may start slightly prior to the actual

designated index point.

• If the disc has no encoded index points, playback will start

from the beginning of the selected track.

RCH

1DISC

5DISCS

TITLE

REP RNDM S

S F PROG

ARTIST TRAC

RCH

1DISC

5DISCS

TITLE

REP RNDM S

S F PROG

ARTIST TRAC

REPEAT

—

INDEX

IDX 3

EARCH

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST

SFPROG CD- TEXT

ARTIST TRACK

13 14 15

17 18 19 20

5 INDEX 1

1 2 3 4 5

1DISC

5DISCS

TITLE

REP RNDM SAVE BEST EDIT FILE

SFPROG CD- TEXT

ARTIST TRACK

12345

678910

(Off)

VARIOUS FUNCTIONS

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:2215

Timer Play

You can start playback at any specified time by connecting a

timer (sold separately). (For details, refer to the owner’s

manual of the timer.)

1 Select the desired play mode (1DISC or 5DISCS).

2 Press the POWER button to turn the unit off.

3 Press the POWER button while pressing the w/d button

on the front panel.

Shortly thereafter, “TIMER P. ON” appears in the

display and the timer play function is on.

(When the timer play function is already on, in which

case, “TIMER P. OFF” appears in the display and timer

play function is off. In this case, repeat the procedure in

steps 2 and 3 to set the timer play function to on.)

4 Set the timer to the desired time.

When the set time comes, the unit turns on and starts

playback.

Adjusting the Level

■ Adjusting the level of signals output

into an amplifier, etc.

You can adjust the level of sound signals output from the

LINE OUT terminals on the rear panel into an amplifier,

etc.

For optimum sound quality

*When the DIGITAL AUDIO OUT (OPTICAL) terminal

is used for the connection, set the level of output signals

to max.

*The level of output signals can be checked in the display.

OUTPUT LEVEL

——

—

678910

11 12 13 14 15

16 17 18 19 20

NATURAL SOUND COMPACT DISC PLAYER CDC-697

DISC

1 2345

STANDBY

/ON

POWER

ON OFF

2,3 3

PLAYXCHANGE

VARIOUS FUNCTIONS

01_En_03_play_CDC-697_UAB.p65 7/12/06, 13:2216

Страница загружается...

Yamaha CDC-697 Инструкция по применению

Похожие модели бренда

Модели других брендов