RK745132

Tefal RK745132, RK740565, RK7405TH, RK745832 Руководство пользователя

  • Привет! Я прочитал инструкцию по эксплуатации вашей мультиварки Tefal. Готов ответить на ваши вопросы о ее функциях, настройках и использовании. Например, вы можете спросить о том, как приготовить рис или йогурт, как настроить таймер или как очистить прибор. Задавайте свои вопросы!
  • Как настроить время приготовления?
    Что делать, если мультиварка не включается?
    Как очистить мультиварку?
    Какое максимальное время подогрева?
EN
RU
UK
KK
www.tefal.com
1 5 6
7
12
9
2
3
4
10
13
8
14&15
11
Fig.1 Fig.2 Fig.3aFig.3b
Fig.4 Fig.5 Fig.6 Fig.7
Fig.12Fig.13Fig.14Fig.15
Fig.16 Fig.18Fig.19
Fig.8 Fig.9 Fig.10Fig.11
Fig.17
MAX.
10cups
10
cups
MAX.
a
b
a
b
1 5 6
7
12
9
2
3
4
10
13
8
14&15
11
Fig.1 Fig.2 Fig.3aFig.3b
Fig.4 Fig.5 Fig.6 Fig.7
Fig.12Fig.13Fig.14Fig.15
Fig.16 Fig.18Fig.19
Fig.8 Fig.9 Fig.10Fig.11
Fig.17
MAX.
10cups
10
cups
MAX.
a
b
a
b
4
CONTROL PANEL
DESCRIPTION
1 Steam basket
2 Graduation for water and rice
3 Removable bowl
4 Measuring cup
5 Rice spoon
6 Soup spoon
7 Lid
8 Removable inner lid
9 Micro pressure valve
10 Lid opening button
11 Handle
12 Housing
13 Power cord
14 Control Panel
a “Keep warm / Cancel”
indicator
b “Keep warm / Cancel” key
c “Preset / Timer” key
d “+” key
e “-” key
f “Start” indicator
g “Start” key
h “Menu” key
i “Temperature” key
j “DIY” key
15 Function indicators
a Baking function
b Soup function
c Steam function
d Rice function
e Yogurt function
f Dessert function
g Reheat function
h Stew/Slow Cook function
i Pilaf/Risotto function
j Porridge function
k Crust/Fry function
l Pasta function
m Jam function
14a
14b
14c
14d
14e
15b 15d 15f
15a 15c
15h
15i
15j
15e 15g
14f
14g
14h
14j
14i
15k
15l
15m
5
EN
IMPORTANT SAFEGUARDS
SAFETY INSTRUCTIONS
Read and follow the instructions for use. Keep
them safe.
This appliance is not intended to be operated by
means of an external timer or a separate remote-
control system.
This appliance can be used by children aged
from 8 years and above if they have been
given supervision or instruction concerning
use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and
user maintenance shall not be made by children
unless they are older than 8years and supervised.
Keep the appliance and its cord out of reach of
children aged less than 8years.
Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved.
Children shall not play with the appliance.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
6
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
As this appliance is for household use only, it is
not intended for use in the following applications
and the guarantee will not apply for:
Staff kitchen areas in shops, offices and other
working environments
Farm houses
By clients in hotels, motels and other residential
type environments
Bed and breakfast type environments
If your appliance is fitted with a removable
power cord: if the power cord is damaged, it must
be replaced by a special cord or unit available
from a authorised service centre.
If your appliance is fitted with fixed power
cord: if the power supply cord is damage, it
must be replaced by the manufacturer, the
manufacturer’s after-sales service department
or similarly qualified person in order to avoid any
danger.
7
EN
The appliance must not be immersed in water or
any other liquid.
Use a damp cloth or sponge with diswashing liquid
to clean the accessories and parts in contact with
foodstuff. Rince with a damp cloth or sponge.
Drying accessories and parts in contact with food
with a dry cloth.
If the symbol is marked on the appliance, this
symbol means “Caution: surfaces may become
hot during use”.
Caution: the surface of heating element is subject
to residual heat after use.
Caution: risk of injury due to improper use of the
appliance.
Caution: if your appliance has a removable power
cord, do not spill liquid on the connector.
Always unplug the appliance:
immediately after use
when moving it
prior to any cleaning or maintenance
if it fails to function correctly
Burns can occur by touching the hot surface of
the appliance, the hot water, steam or the food.
During cooking, the appliance gives out heat and
steam. Keep face and hands away.
8
Do not get face and hands close to the steam
outlet. Do not obstruct the steam outlet.
For any problems or queries please contact our
Customer Relations Team or consult our web site.
The appliance can be used up to an altitude of
4000m.
For your safety, this appliance complies with the safety regulations and
directives in effect at the time of manufacture (Low-voltage Directive,
Electromagnetic Compatibility, Food Contact Materials Regulations,
Environment…).
Check that the power supply voltage corresponds to that shown on the
appliance (alternating current).
Given the diverse standards in effect, if the appliance is used in a country
other than that in which it is purchased, have it checked by an approved
service centre.
CONNECTING TO THE POWER SUPPLY
Do not use the appliance if:
the appliance or the cord is damaged
the appliance has fallen or shows visible damage or does not work
properly
In the event of the above, the appliance must be sent to an approved
Service Centre. Do not take the appliance apart yourself.
Do not leave the cord hanging
Always plug the appliance into an earthed socket.
Do not use an extension lead. If you accept liability for doing so, only
use an extension lead which is in good condition, has an earthed plug
and is suited to the power of the appliance.
Do not unplug the appliance by pulling on the cord.
USING
Use a flat, stable, heat-resistant work surface away from any water
splashes.
9
EN
PROTECT THE ENVIRONMENT
Your appliance has been designed to run for many years. However,
when you decide to replace it, remember to think about how you can
contribute to protecting the environment.
Before discarding your appliance you should remove the battery from
the timer and dispose of it at a local civic waste collection centre
(according to model).
Environment protection first!
Your appliance contains valuable materials which can be recovered or
recycled.
Leave it at a local civic waste collection point.
Do not allow the base of the appliance to come into contact with water
Never try to operate the appliance when the bowl is empty or without
the bowl.
The cooking function/knob must be allowed to operate freely. Do not
prevent or obstruct the function from automatically changing to the
keep warm function.
Do not remove the bowl while the appliance is working.
Do not put the appliance directly onto a hot surface, or any other source
of heat or flame, as it will cause a failure or danger.
The bowl and the heating plate should be in direct contact. Any object or
food inserted between these two parts would with the correct operation.
Do not place the appliance near a heat source or in a hot oven, as
serious damage could result.
Do not put any food or water into the appliance until the bowl is in
place.
Respect the levels indicated in the recipes.
Should any part of your appliance catch fire, do not attempt to put it
out with water. To smother the flames use a damp tea towel.
Any intervention should only be made by a service centre with original
spare parts.
10
BEFORE THE FIRST USE
Unpack the appliance
Remove the appliance from the packaging and unpack all the accessories
and printed documents.
Open the lid by pushing the opening button on the housing – fig.1.
Read the Instructions and carefully follow the operation method.
Clean the appliance
Remove the bowl – fig.2, the inner lid and the pressure valve – fig.3a
and 3b.
Clean the bowl, the valve and the inner lid with a sponge and washing
up liquid.
Wipe the outside of the appliance and the lid with a damp cloth.
Dry off carefully.
Put all the elements back in their original position. Install the inner lid
in the right positions on the top lid of machine. Then, put the inner
lid behind the 2 ribs and push it on the top until it’s fixed. Install the
detachable cord into the socket on the cooker base.
FOR THE APPLIANCE AND ALL FUNCTIONS
Carefully wipe the outside of the bowl (especially the bottom). Make
sure that there are no foreign residues or liquid underneath the bowl
and on the heating element – fig.5.
Place the bowl into the appliance, making sure that it is correctly
positioned – fig.6.
Make sure that the inner lid is correctly in position.
Close the lid in place so you hear a “click”.
Install the power cord into the socket of the multicooker base and then
plug into the power outlet. The appliance will ring a long sound «Beep»,
all the indicators on the control box will light up for an instant.
Then the screen display will show «----», and all the indicators will
switch off. The appliance enters into standby mode, you can select the
menu functions as you wish.
Do not touch the heating element when the product is plugged in or
after cooking. Do not carry the product in use or just after cooking.
This appliance is only intended for indoor use.
Never place your hand on the steam vent during cooking, as there is a
danger of burns – fig.10.
11
EN
After start the cooking, if you wish to change the selected cooking
menu because of an error, press «KEEP WARM/CANCEL» key and
re-choose the menu you want.
Only use the inner bowl provided with the appliance.
Do not pour water or put ingredients in the appliance without the
bowl inside.
The maximum quantity of water + ingredient should not exceed the
highest mark inside the bowl - fig.7.
Programs
Default
Time
Cooking Time Delayed Start Default Temperature Lid Position
Keep
warm
Range Adjustable Range Adjustable Temp (°C) Range (°C) Closed Open
Baking 45m 5m-4h 5min Cooking time ~24h 5min 160 °C 120/140/160 * *
Crust/Fry 20m 5m-1h30m 1min - 160 °C
120/130/140/
150/160
* * *
Soup 1h 5m-3h 5min Cooking time ~24h 5min Automatic - * *
Stew/
Slow
Cook
4h 20m-9h 5min Cooking time ~24h 5min 100 °C 80/100/120 * *
Steam 30m 5m-3h 5min Cooking time ~24h 5min 100 °C - * *
Rice Automatic Automatic - Cooking time ~24h 5min Automatic - * *
Pilaf/
Risotto
Automatic Automatic - Cooking time ~24h 5min Automatic - * *
Dessert 45m 5m-2h 5min Cooking time ~24h 5min 130 °C 100/130/160 *
Porridge 25m 5m-2h 5min Cooking time ~24h 5min Automatic - * *
Yogurt 8h 1h-12h 15min - 40 °C - *
Jam 1h 5m-3h 5min Cooking time ~24h 5min 105 °C - * *
Pasta 10m 3m-3h 1min Cooking time ~24h 5min 100 °C - * *
Reheat 25m 5m-1h 5min - 100 °C - * *
Keep
Warm
Automatic Automatic 75 °C - * *
DIY 30m 5m-9h 5min Cooking time ~24h 5min 100 °C
40-160
10°C per
interval
* *
COOKING PROGRAM TABLE
12
CONTROL PANEL
1. START KEY
Press to start the cooking process.
2. MENU KEY
Under standby status, press the <Menu> key to cycle through the
following functions: Baking Soup Steam Rice Yogurt
Dessert Reheat Stew/Slow Cook Pilaf/Risotto Porridge
Crust/Fry Pasta Jam.
The screen displays the default cooking time of each function (except
Rice, Pilaf/Risotto). “Start” button light flashes and the linked function
lights up.
Note:
You can long press the “Menu” key to cancel the “beep” sound if needed
(until the long beep sound). If you want to start the beep sound again,
press the “Menu” key for a second time.
3. “Preset/ Timer” KEY
Timer: You can adjust the cooking time (except Rice, Pilaf/Risotto), when
you select a cooking mode, the default cooking time will be shown on
the digital display. Press the “Preset/Timer” key once (the timer indicator
will turn on), and then use the +/- buttons to adjust the cooking time.
Preset: The preset time corresponds to the time for end of cooking,
except Crust/Fry, Yogurt, Reheat. After selecting the desired cooking
mode, press the “Preset/Timer” key button twice (the preset indicator
will turn on), and then use the +/- button to set the timer. Cooking will
begin after the preset time has elapsed.
When you have chosen the required preset time, press the “Start” key to
enter cooking status, “start” indicator will light up the screen will display
the desired cooking time and the preset pictogram will light up.
When the Multicooker begins the cooking mode, the preset pictogram
light will turn off and the timer pictogram will light up.
The maximum start delay is 24 hours. If the preset time is shorter than
the cooking time, cooking will start immediately.
4. “+/-” KEYS
Use these buttons to adjust the cooking time (+/- 1, 5 or 15 mins) and
preset time (+/- 5 mins). You cannot adjust the cooking time in “Rice,
13
EN
Pilaf/Risotto” mode and cannot adjust the preset time in “Crust/Fry,
Yogurt, Reheat” mode.
5. “Keep Warm/Cancel” KEY
In standby mode, press the keep warm/cancel key to heat your food and
keep it warm.
Press the keep warm/cancel key to stop the cooking process or cancel all
settings. The Multicooker will return to standby mode.
See details in KEEP WARM/CANCEL function description.
6. “Temperature” KEY
To use the Temperature function, choose a cooking program and cooking
time first (only available for Baking, Crust/Fry, Stew/Slow Cook, Dessert
and DIY). Then, press the “Temperature” key and select the temperature.
The default cooking temperature will change depending on the selected
cooking program. Each press of “+” and “-” key can increase or decrease
the temperature.
When you have chosen the required temperature, press the “Start” key
to start the cooking process, the “Start” indicator will remain on.
You can modify the temperature during the cooking by pressing the
“Temperature” key. After selected the choose temperature and without
action during 5 seconds, the multicooker will resume the cooking with
the new setting.
PORRIDGE FUNCTION
Press “Menu” key to select function “Porridge”. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset / Timer” key first
and then press “+” and “−” keys.
Press “Start” key. The mulitcooker will start the “Porridge” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
At the end of cooking, the multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
14
STEAM FUNCTION
Press “Menu” key to select function “Steam”. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset / Timer” key first
and then press “+” and “−” keys.
Press “Start” key. The mulitcooker will start the “Steam” cooking program
and the “Start” light will come on. The screen will display the remaining
cooking time.
At the end of cooking, the multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
SOUP FUNCTION
Press “Menu” key to select function “Soup”. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset / Timer” key first
and then press “+” and “−” keys.
Press “Start” key. The mulitcooker will start the “Soup” cooking program
and the “Start” light will come on. The screen will display the remaining
cooking time.
At the end of cooking, the multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
15
ENBAKING FUNCTION
JAM FUNCTION
Press <Menu> key to select function <Baking>. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys. Press “Temperature” key to select the
temperature.
Press “Start” key. The mulitcooker will start the “Baking” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
At the end of cooking, the multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
Press <Menu> key to select function <Jam>. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys.
Press “Start” key. The mulitcooker will start the “Jam” cooking program
and the “Start” light will come on. The screen will display the remaining
cooking time.
At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
16
CRUST/FRY FUNCTION
STEW/SLOW COOK FUNCTION
Press <Menu> key to select function <Crust/Fry>. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys. Press “Temperature” key to select the
temperature.
Press “Start” key. The mulitcooker will start the “Crust/Fry” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
At the end of cooking, the multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
Note: Always use this function with oil and food. With oil only, it may
cause a failure or danger.
Press <Menu> key to select function <Stew/Slow Cook>. The screen
displays the default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys. Press “Temperature” key to select the
temperature.
Press “Start” key. The mulitcooker will start the “Stew/Slow Cook” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
At the end of cooking, the multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
17
ENYOGURT FUNCTION
Press <Menu> key to select function <Yogurt>. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys.
Press “Start” key. The mulitcooker will start the “Yogurt” cooking program
and the “Start” light will come on. The screen will display the remaining
cooking time.
At the end of cooking, the multicooker will “beep” three times.
Note: There is no keep warm at the end of cooking. Use for making yogurt
in oven-proof glass containers.
CHOICE OF INGREDIENTS FOR YOGURT
Milk
What milk should you use?
All our recipes (unless otherwise stipulated) are prepared using cow’s
milk. You can use plant milk such as soya milk for example as well as
sheep or goat’s milk but, in this case, the firmness of the yogurt may vary
depending on the milk used. Raw milk or long-life milks and all the milks
described below are suitable for your appliance:
Long-life sterilised milk: UHT whole milk results in firmer yogurt. Using
semi-skimmed milk will result in less firm yogurt. However, you can use
semi-skimmed milk and add one or two bowls of powdered milk.
Pasteurised milk: this milk gives a more creamy yogurt with a little bit
of skin on the top.
Raw milk (farm milk): this must be boiled. It is also recommended to
let it boil for a long time. It would be dangerous to use this milk without
boiling it. You must then leave it to cool before using it in your appliance.
Culturing using yogurt prepared with raw milk is not recommended.
Powdered milk: using powdered milk will result in very creamy yogurt.
Follow the instructions on the manufacturer’s box.
Choose a whole milk, preferably long-life UHT.
Raw (fresh) or pasteurised milk must be boiled then cooled and needs
the skin removing.
18
DESSERT FUNCTION
RICE FUNCTION
Press <Menu> key to select function <Dessert>. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys. Press “Temperature” key to select the
temperature.
Press “Start” key. The mulitcooker will start the “Dessert” cooking
program and the “Start” light will come on. The screen will display the
remaining cooking time.
At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
Pour the required quantity of rice into the bowl using the measuring
cup provided – fig.4. Then fill with cold water up to the corresponding
«CUP» mark printed in the bowl – fig.2.
Close the lid.
Note: Always add the rice first otherwise you will have too much water.
Press «Menu» key to select function «Rice». The screen displays « »,
the “Start” light will flash, then press «Start» key. The mulitcooker will
start the “rice” cooking program and the “Start” light will come on. The
screen will flash« -- ». Time is not displayed as the multicooker do it
automatically and it can vary during cooking.
At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
PILAF/RISOTTO FUNCTION
Press «Menu» key to select function «Pilaf/Risotto». The screen displays
« », the “Start” light will flash, then press «Start» key. The mulitcooker
will start the “Pilaf/Risotto” cooking program and the “Start” light
will come on. The screen will flash « -- ». Time is not displayed as the
multicooker do it automatically and it can vary during cooking.
At the end of cooking, the multicooker will “beep” three times and
begin the keep warm program, the “Keep Warm” indicator will come on
and the screen will display the time for which the keep warm function
has been active.
19
EN
RECOMMENDATIONS FOR BEST RICE COOKING (Rice
and Pilaf/Risotto functions)
Before cooking, measure the rice with the measuring cup and rinse it
(do not rinse risotto rice).
Put the rinsed rice well distributed around the whole surface of the bowl.
Fill it with water to the corresponding water level (The graduations in cups).
When the rice is ready, when the “Keep Warm” indicator light is on, stir
the rice and then leave it in the multicooker for a few minutes longer in
order to get perfect rice with separated grains.
This table below gives a guide to cook rice:
COOKING GUIDE FOR WHITE RICE – 10 cups
Measuring cups Weight of rice
Water level in
the bowl (+ rice)
Serves
2 300 g 2 cup mark 3per. – 4per.
4 600 g 4 cup mark 5per. – 6per.
6 900 g 6 cup mark 8per. – 10per.
8 1200 g 8 cup mark 13per. – 14per.
10 1500 g 10 cup mark 16per. – 18per.
The time and temperature are automatic for rice cooking.
Please note that there are 7 steps:
Preheat => Water absorb => Temperature quick rise => Keep boiling =>
Water evaporation => Braise rice => Keep warm.
The cooking time depends on the quantity and type of rice.
20
PASTA FUNCTION
REHEAT FUNCTION
To cook pasta it is important to wait until the water reaches good
temperature before adding pasta.
Press <Menu> key to select function <Pasta>. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys.
Press “Start” key. The mulitcooker will start the “Pasta” cooking program
and the “Start” light will come on. The screen will display the remaining
cooking time.
The multicooker will beep when the water is at the ideal temperature.
Put the pasta into the water and press the start key again to begin the
cooking process. The lid must remain open while the pasta is cooking.
At the end of cooking, the multicooker will “beep” three times.
Note: No keep warm function for this function
This function is intended to reheat only cooked food.
Press <Menu> key to select function <Reheat>. The screen displays the
default cooking time, the “Start” light will flash red.
You can change the cooking time by pressing “Preset/Timer” key first
and then press “+” and “-” keys.
Press “Start” key. The mulitcooker will start the “reheat” cooking program
and the “Start” light will come on. The screen will display the remaining
cooking time.
At the end of cooking, multicooker will “beep” three times and begin
the keep warm program, the “Keep Warm” indicator will come on and
the screen will display the time for which the keep warm function has
been active.
CAUTION:
The cold food should not exceed ½ of the cooker’s volume. Too much
food cannot be thoroughly heated. Repeated use of “Reheat” or too little
food will lead to burnt food and hard layer at the bottom.
It is recommend not to reheat thick porridge, or it may become pasty.
Do not heat long-stored cold food to avoid smell.
/