Alpha A7C Noir + 28-60

Sony Alpha A7C Noir + 28-60, Alpha A7C Noir Инструкция по применению

  • Привет! Я — чат-бот, который прочитал руководство по началу работы для камеры Sony ILCE-7C. Я могу ответить на ваши вопросы о настройке, съемке фото и видео, подключении к смартфону и других функциях этой камеры. В руководстве подробно описаны все шаги от первой установки до передачи снимков на телефон. Спрашивайте!
  • Как вставить батарею и карту памяти?
    Как зарядить батарею?
    Как установить объектив?
    Как переносить изображения на смартфон?
©2020 Sony Corporation Printed in Thailand
C:\0708\5021708411ILCE7CCEC\00COV-ILCE7CCEC\000COV.indd
2020/07/08 08:46
ILCE-7C
5-021-708-41(1)
C:\0708\5021708411ILCE7CCEC\00COV-ILCE7CCEC\000COV.indd
2020/07/08 08:46
ILCE-7C
5-021-708-41(1)
ILCE-7C
5-021-708-41(1)
E-mount
Interchangeable Lens Digital Camera/Startup Guide GB
Fotocamera digitale con obiettivo intercambiabile/Guida di avvio IT
Digitalkamera med utbytbart objektiv/Startguide SE
Digitalkamera mit Wechselobjektiv/Einführungsanleitung DE
Цифровой фотоаппарат со сменным объективом/Руководство по началу работы
RU
Digitale camera met verwisselbare lens/Beknopte gids NL
Digitalkamera med utskiftbart objektiv/Startveiledning NO
Appareil photo à objectif interchangeable/Guide de démarrage FR
Câmara Digital de Objetivas intercambiáveis/Guia de início PT
Digitaalinen kamera vaihdettavalla objektiivilla/Aloitusopas FI
Cámara Digital de Lentes Intercambiables/Guía de inicio ES
Цифрова камера зі змінним об’єктивом/Посібник із початку роботи
UA
Aparat cyfrowy z wymiennymi obiektywami/Przewodnik uruchamiania
PL
Digitalkamera med udskifteligt objektiv/Startvejledning DK
https://rd1.sony.net/help/ilc/2020/h_zz/
“Help Guide” (Web manual)
Refer to “Help Guide” for in-depth
instructions on the many
functions of the camera.
ILCE-7C
5-021-708-41(1)
GB
2
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
English
About the manual for this camera
This guide describes the necessary preparations to start using the
product, basic operations, etc. For details, refer to the “Help Guide” (web
manual).
https://rd1.sony.net/help/ilc/2020/h_zz/
“Help Guide” (Web manual)
ILCE-7C Help Guide
Looking for valuable information, such as essential points
on shooting
This website introduces convenient functions, ways of usage, and setting
examples.
Refer to the website when you set up your camera.
Tutorials
https://www.sony.net/tutorial/ilc/7c/
ILCE-7C
5-021-708-41(1)
GB
3
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
GB
Preparations
Checking the supplied items
The number in parentheses indicates the number of pieces.
Camera (1)
Power cord (mains lead) (1)*
(supplied in some countries/
regions)
* Multiple power cords may be
supplied with this equipment. Use
the appropriate one that matches
your country/region. See “Notes
on use.”
Rechargeable battery pack
NP-FZ100 (1)
USB Type-C® cable (1)
AC Adaptor (1)
The type of the AC Adaptor may
differ depending on the country/
region.
Shoulder strap (1)
Body cap (1) (attached to the
camera)
Shoe cap (1) (attached to the
camera)
Startup Guide (this manual) (1)
Reference Guide (1)
Inserting the battery pack (supplied)/memory card
(sold separately) into the camera
Open the battery cover and the memory card cover, insert the battery/
memory card, and close the covers.
Memory card
Battery pack
Lock lever
Terminal
side
Battery pack
Make sure that the battery pack is facing in the correct direction, and insert
it while pressing the battery lock lever.
ILCE-7C
5-021-708-41(1)
GB
4
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
Memory card
Insert the memory card with the terminal side facing as illustrated.
This camera is compatible with SD memory cards. For details on the
compatible memory cards, refer to the “Help Guide.
When you use a memory card with this camera for the first time, format the
card using the camera in order to stabilize the performance of the memory card.
Note
Formatting erases all data, including protected images and registered
settings (M1 to M4). Once erased, this data cannot be restored. Save
valuable data to a computer, etc. before formatting.
Charging the battery pack
1 Turn the power off.
If the camera is turned on, the battery pack will not be charged.
2 Connect the camera with the
battery pack inserted to the AC
Adaptor (supplied) using the USB
cable (supplied), and connect the
AC Adaptor to the wall outlet (wall
socket).
The charge lamp will light up when
charging starts. When the charge lamp
turns off, charging is completed.
Charge lamp
Attaching a lens
Mounting indexes
ILCE-7C
5-021-708-41(1)
GB
5
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
GB
1 Remove the body cap from the camera and the rear lens cap from the
rear of the lens.
2 Mount the lens by aligning the two white index marks (mounting
indexes) on the lens and camera.
3 While pushing the lens lightly toward the camera, turn the lens slowly
in the direction of the arrow until it clicks into the locked position.
Setting the language and the clock
ON/OFF (Power) switch
Control wheel
Select items : ////
/
Confirm : Center button
1 Set the ON/OFF (Power) switch to “ON” to turn on the camera.
2 Select the desired language and then press the center of the control
wheel.
3 Make sure that [Enter] is selected on the screen and then press the
center button.
4 Select the desired geographic location and then press the center button.
5 Set [Daylight Savings], [Date/Time], and [Date Format], and then select
[Enter] and press the center button.
If you want to reconfigure the date/time or the area setting at a later
point, select MENU
(Setup) [Date/Time Setup] or [Area Setting].
ILCE-7C
5-021-708-41(1)
GB
6
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
Shooting
Shooting still images
1 Select the desired shooting mode by
turning the mode dial.
Shutter button
Mode dial
2 Press the shutter button halfway
down to focus.
3 Press the shutter button all the way
down.
Shooting movies
1 Press the MOVIE (Movie) button to
start recording.
Movie recording can be started from
any shooting mode in the default
setting.
MOVIE (Movie) button
2 Press the MOVIE button again to
stop recording.
ILCE-7C
5-021-708-41(1)
GB
7
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
GB
Viewing
1 Press the (Playback) button to
switch to the playback mode.
(Playback) button
Control wheel
2 Select an image with the control
wheel.
You can move to the previous image/
next image by pressing the left/right
side of the control wheel.
To start playing back a movie, press
the center button on the control
wheel.
Transferring images to a
smartphone
You can transfer images to a smartphone by connecting the camera and a
smartphone via Wi-Fi.
1 : Install Imaging Edge Mobile on your smartphone.
To connect the camera and your smartphone, Imaging Edge Mobile is
required.
Install Imaging Edge Mobile to your smartphone in advance.
If Imaging Edge Mobile is already installed on your smartphone, be sure
to update it to the latest version.
https://www.sony.net/iem/
ILCE-7C
5-021-708-41(1)
GB
8
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
2 Connect the camera and your smartphone using the QR Code.
: MENU (Network) [Send to Smartphone Func.]
[Send to Smartphone] [Select on This Device] images to transfer.
If you want to select images on the smartphone, select
[Select on Smartphone].
: Launch Imaging Edge Mobile on your smartphone, and select
[Connect with a new camera].
: Scan the QR Code displayed on the
camera using your smartphone.
3 The selected images will be transferred.
If you are using Android, you can transfer images after the first time simply
by launching Imaging Edge Mobile with Step 2-
above.
If image transfer does not start, select the camera to connect on the screen
of your smartphone.
For details on how to connect to a smartphone, refer to the following
support sites:
https://www.sony.net/dics/iem02/
For details on other connection methods, types of images that can be
transferred, or how to use the smartphone as a remote commander to
operate the camera, refer to the “Help Guide.”
The Wi-Fi functions introduced in this manual are not guaranteed to
operate on all smartphones or tablets.
The Wi-Fi functions of this camera are not available when connected to a
public wireless LAN.
ILCE-7C
5-021-708-41(1)
GB
9
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
GB
Editing movies on a smartphone
You can edit recorded movies by installing the Movie Edit add-on to your
smartphone.
For details on installation and use, refer to the following URL:
https://www.sony.net/mead/
Managing and editing images
on a computer
By connecting the camera to a computer using a USB cable or inserting the
camera’s memory card into the computer, you can import recorded images
to the computer.
You can perform remote shooting from a computer, and adjust or develop
RAW images recorded with the camera by using the software suite
Imaging Edge Desktop.
For details on the computer software, refer to the following URL.
https://www.sony.net/disoft/
ILCE-7C
5-021-708-41(1)
GB
10
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
Notes on use
Refer to “Precautions“ in the “Help Guide”
as well.
Notes on handling the product
• This camera is designed to be dust-
and moisture-resistant, but is not
waterproof or dust-proof.
• Do not leave the lens or the viewfinder
exposed to a strong light source such
as sunlight. Because of the lens’s
condensing function, doing so may
cause smoke, fire, or a malfunction
inside the camera body or the lens. If
you have to leave the camera exposed
to a light source such as sunlight,
attach the lens cap to the lens.
• When you shoot with backlighting,
keep the sun sufficiently far away
from the angle of view. Otherwise, the
sunlight may enter the focus inside the
camera and cause smoke or fire. Even if
the sun is slightly away from the angle
of view, it may still cause smoke or fire.
• Do not directly expose the lens to
beams such as laser beams. That may
damage the image sensor and cause
the camera to malfunction.
• Do not look at sunlight or a strong
light source through the lens when
it is detached. This may result in
unrecoverable damage to the eyes or
cause a malfunction.
• This camera (including accessories)
has magnet(s) which may interfere
with pacemakers, programmable shunt
valves for hydrocephalus treatment, or
other medical devices. Do not place this
camera close to persons who use such
medical devices. Consult your doctor
before using this camera if you use any
such medical device.
• Do not leave the device parts within
the reach of infants. It may cause an
accident or injury.
Notes on the monitor and electronic
viewfinder
• The monitor and electronic viewfinder
are manufactured using extremely
high-precision technology, and over
99.99% of the pixels are operational
for effective use. However, there may
be some small black dots and/or
bright dots (white, red, blue or green
in color) that constantly appear on
the monitor and electronic viewfinder.
These are imperfections due to the
manufacturing process and do not
affect the recorded images in any way.
• When shooting with the viewfinder,
you may experience symptoms such as
eyestrain, fatigue, motion sickness, or
nausea. We recommend that you take a
break at regular intervals when you are
shooting with the viewfinder.
• If the monitor or electronic viewfinder
is damaged, stop using the camera
immediately. The damaged parts may
harm your hands, face, etc.
Notes on continuous shooting
During continuous shooting, the monitor
or viewfinder may flash between the
shooting screen and a black screen.
If you keep watching the screen in
this situation, you may experience
uncomfortable symptoms such as
feeling of unwellness. If you experience
uncomfortable symptoms, stop using
the camera, and consult your doctor as
necessary.
Notes on recording for long periods of
time or recording 4K movies
• The camera body and battery may
become warm with use – this is normal.
• If the same part of your skin touches
the camera for a long period of time
while using the camera, even if the
camera does not feel hot to you, it may
cause symptoms of a low-temperature
burn such as redness or blistering.
Pay special attention in the following
situations and use a tripod, etc.
- When using the camera in a high
temperature environment
- When someone with poor circulation
or impaired skin sensation uses the
camera
ILCE-7C
5-021-708-41(1)
GB
11
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
GB
- When using the camera with
[Auto Power OFF Temp.] set to [High]
Notes on using a tripod
Use a tripod with a screw less than
5.5mm (7/32 inches) long. Otherwise,
you cannot firmly secure the camera, and
damage to the camera may occur.
Sony lenses/accessories
Using this unit with products from
other manufacturers may affect its
performance, leading to accidents or
malfunction.
Warning on copyrights
Television programs, films, videotapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provisions of the
copyright laws.
Notes on location information
If you upload and share an image tagged
with a location, you may accidentally
reveal the information to a third party. To
prevent third parties from obtaining your
location information, set
[
Location Info. Link Set.] to [Off] before
shooting images.
Notes on discarding or transferring this
product to others
Before discarding or transferring this
product to others, be sure to perform the
following operation to protect private
information.
• Select [Setting Reset] [Initialize].
Notes on discarding or transferring a
memory card to others
Executing [Format] or [Delete] on
the camera or a computer may not
completely delete the data on the
memory card. Before transferring a
memory card to others, we recommend
that you delete the data completely using
data deletion software. When discarding
a memory card, we recommend that you
physically destroy it.
Note on network functions
When you use network functions,
unintended third parties on the network
may access the camera, depending on
the usage environment. For example,
unauthorized access to the camera may
occur in network environments to which
another network device is connected or
can connect without permission. Sony
bears no responsibility for any loss or
damage caused by connecting to such
network environments.
Note on the 5GHz band for wireless LAN
When using the wireless LAN function
outdoors, set the band to 2.4GHz
by following the procedure below.
(WW850128 only)
• MENU (Network)
[Wi-Fi Settings] [Frequency Band]
How to turn off wireless network
functions (Wi-Fi, etc.) temporarily
When you board an airplane, etc., you
can turn off all wireless network functions
temporarily using [Airplane Mode].
Power Cord
For the customers in the UK, Ireland,
Malta, Cyprus and Saudi Arabia
Use the power cord (A).
For safety reasons, the power cord (B) is
not intended for above countries/regions
and shall therefore not be used there.
For the customers in other EU
countries/regions
Use the power cord (B).
(A) (B)
ILCE-7C
5-021-708-41(1)
GB
12
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
For Customers in the U.S.A.
For question regarding your product or
for the Sony Service Center nearest you,
call 1-800-222-SONY (7669) .
Supplier’s Declaration of Conformity
Trade Name : SONY
Model : WW850128
Responsible Party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
For Customers in the U.A.E.
Specifications
Camera
[System]
Camera Type:
Interchangeable Lens Digital Camera
Lens: Sony E-mount lens
[Image sensor]
Image format: 35mm full frame
(35.6mm × 23.8mm), CMOS image
sensor
Effective pixel number of camera:
Approx. 24200000 pixels
Total pixel number of camera:
Approx. 25300000 pixels
[Electronic Viewfinder]
Type: 1.0 cm (0.39 type)
Electronic Viewfinder
[Monitor]
7.5 cm (3.0 type) TFT drive, touch
panel
[General]
Rated input: 7.2V
, 2.9W
Operating temperature:
0 to 40°C (32 to 104°F)
Storage temperature:
–20 to 55°C (–4 to 131°F)
Dimensions (W/H/D) (Approx.):
124.0 × 71.1 × 59.7mm
124.0 × 71.1 × 53.5mm
(from grip to monitor)
5 × 27/8 × 23/8in.
5 × 27/8 × 21/8in.
(from grip to monitor)
Mass (Approx.):
509g (1lb 2.0oz) (including battery
pack, SD memory card)
[Wireless LAN]
WW850128 (see name plate on the
bottom of camera)
Supported format:
IEEE802.11a/b/g/n/ac
Frequency band: 2.4GHz/5GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method:
Wi-Fi Protected Setup™ (WPS)/
Manual
Access method: Infrastructure mode
WW384063 (see name plate on the
bottom of camera)
Supported format: IEEE 802.11 b/g/n
Frequency band: 2.4 GHz
Security: WEP/WPA-PSK/WPA2-PSK
Connection method:
Wi-Fi Protected Setup™ (WPS)/
Manual
Access method: Infrastructure mode
ILCE-7C
5-021-708-41(1)
GB
13
C:\Users\gotanda\Desktop\5021708411_GB_Book_Thailand\01GB-ILCE7CCEC\01GB.indd
DTP data saved: 2020/06/26 10:35
PDF file created: 2020/06/26 10:36
GB
AC Adaptor
AC-UUD12/AC-UUE12
Rated input:
100 - 240V
, 50/60Hz, 0.2A
Rated output: 5V , 1.5A
Rechargeable battery pack
NP-FZ100
Rated voltage: 7.2V
Design and specifications are subject
to change without notice.
Trademarks
• XAVC S and are registered
trademarks of Sony Corporation.
• USB Type-C® and USB-C®
are registered trademarks of
USB Implementers Forum.
• Android and Google Play are
trademarks or registered trademarks of
Google LLC.
• Wi-Fi, the Wi-Fi logo and
Wi-Fi Protected Setup are registered
trademarks or trademarks of the
Wi-Fi Alliance.
• QR Code is a trademark of
Denso Wave Inc.
• In addition, system and product names
used in this manual are, in general,
trademarks or registered trademarks
of their respective developers or
manufacturers. However, the ™ or 
marks may not be used in all cases in
this manual.
Additional information on this
product and answers to frequently
asked questions can be found at our
Customer Support Website.
ILCE-7C
5-021-708-41(1)
FR
2
\\Win-473\camera\CX88600(NB)_SG\Multi\04_Compose\Printed_in_Thiland\5021708411_14lang\5021708411ILCE7CCEC\02FR-ILCE7CCEC\02FR.indd
DTP data saved: 2020/06/26 08:49
PDF file created: 2020/07/08 09:05
Français
À propos du manuel pour cet
appareil
Ce guide décrit les préparatifs nécessaires pour commencer à utiliser le
produit, les fonctions de base, etc. Pour plus d’informations, consultez le
«Guide d’aide» (manuel en ligne).
https://rd1.sony.net/help/ilc/2020/h_zz/
«Guide d’aide» (Manuel en ligne)
ILCE-7C Guide d’aide
Recherche d’informations précieuses, comme des points
essentiels sur la prise de vue
Ce site Web présente des fonctions pratiques, des types d’utilisation et des
exemples de réglage.
Consultez le site Web lorsque vous configurez l’appareil.
Tutoriels
https://www.sony.net/tutorial/ilc/7c/
ILCE-7C
5-021-708-41(1)
FR
3
\\Win-473\camera\CX88600(NB)_SG\Multi\04_Compose\Printed_in_Thiland\5021708411_14lang\5021708411ILCE7CCEC\02FR-ILCE7CCEC\02FR.indd
DTP data saved: 2020/06/26 08:49
PDF file created: 2020/07/08 09:05
FR
Préparatifs
Vérification des éléments fournis
Le nombre indiqué entre parenthèses correspond au nombre d’éléments
fournis.
Appareil photo (1)
Cordon d’alimentation (1)* (fourni
dans certains pays/régions)
* Plusieurs cordons d’alimentation
peuvent être fournis avec cet
équipement. Utilisez le cordon
approprié qui correspond à votre
pays ou région. Voir «Remarques
sur l’utilisation».
Batterie rechargeable NP-FZ100
(1)
Câble USB Type-C® (1)
Adaptateur secteur (1)
Le type d’adaptateur secteur peut
varier selon le pays/la région.
Bandoulière (1)
Capuchon de boîtier (1) (fixé à
l’appareil photo)
Capuchon de la griffe (1) (fixé à
l’appareil photo)
Guide de démarrage (ce manuel)
(1)
Guide de référence (1)
Insertion de la batterie (fourni)/carte mémoire
(vendu séparément) dans l’appareil
Ouvrez le couvercle du compartiment de la batterie et le couvercle de
la carte mémoire, insérez la batterie/carte mémoire, puis fermez les
couvercles.
Carte mémoire
Batterie
Levier de
verrouillage
Côté
borne
Batterie
Assurez-vous que la batterie est placée dans le bon sens et insérez-la tout
en appuyant sur le levier de verrouillage de la batterie.
ILCE-7C
5-021-708-41(1)
FR
4
\\Win-473\camera\CX88600(NB)_SG\Multi\04_Compose\Printed_in_Thiland\5021708411_14lang\5021708411ILCE7CCEC\02FR-ILCE7CCEC\02FR.indd
DTP data saved: 2020/06/26 08:49
PDF file created: 2020/07/08 09:05
Carte mémoire
Insérez la carte mémoire avec le côté borne tourné comme illustré.
Cet appareil est compatible avec les cartes mémoire SD. Pour plus
d’informations sur les cartes mémoire compatibles, reportez-vous au
«Guide d’aide».
Lorsque vous utilisez une carte mémoire pour la première fois avec cet
appareil, formatez-la en utilisant l’appareil, afin de stabiliser la performance
de la carte mémoire.
Note
Le formatage efface toutes les données, y compris les images protégées
et les réglages enregistrés (M1 à M4). Une fois effacées, ces données ne
peuvent pas être récupérées. Sauvegardez vos données importantes sur
un ordinateur ou autre avant le formatage.
Charge de la batterie
1 Mettez-le hors tension.
Si l’appareil est sous tension, la batterie ne sera pas chargée.
2 La batterie étant insérée dans l’appareil,
raccordez celui-ci à l’adaptateur secteur
(fourni) à l’aide du câble USB (fourni)
et branchez l’adaptateur secteur sur la
prise murale.
Le témoin de charge s’allumera au
commencement de la charge. Lorsque le
témoin de charge s’éteint, la charge est
terminée.
Témoin
de charge
ILCE-7C
5-021-708-41(1)
FR
5
\\Win-473\camera\CX88600(NB)_SG\Multi\04_Compose\Printed_in_Thiland\5021708411_14lang\5021708411ILCE7CCEC\02FR-ILCE7CCEC\02FR.indd
DTP data saved: 2020/06/26 08:49
PDF file created: 2020/07/08 09:05
FR
Fixation d’un objectif
Repères de montage
1 Retirez le capuchon de boîtier de l’appareil et le capuchon d’objectif
arrière de l’arrière de l’objectif.
2 Installez l’objectif en alignant le repère blanc de l’objectif et celui de
l’appareil photo (repères de montage).
3 Tout en poussant doucement l’objectif vers l’appareil, tournez
lentement l’objectif dans le sens de la flèche jusqu’à ce qu’il s’enclenche
en position verrouillée.
Réglage de la langue et de l’horloge
Interrupteur ON/OFF (Alimentation)
Molette de commande
Pour sélectionner des éléments:
////
/
Pour confirmer: Bouton central
1 Placez l’interrupteur ON/OFF (Alimentation) sur «ON» pour mettre
l’appareil sous tension.
ILCE-7C
5-021-708-41(1)
FR
6
\\Win-473\camera\CX88600(NB)_SG\Multi\04_Compose\Printed_in_Thiland\5021708411_14lang\5021708411ILCE7CCEC\02FR-ILCE7CCEC\02FR.indd
DTP data saved: 2020/06/26 08:49
PDF file created: 2020/07/08 09:05
2 Sélectionnez la langue souhaitée et appuyez au centre de la molette de
commande.
3 Vérifiez que [Entrer] est sélectionné sur l’écran, puis appuyez sur le
bouton central.
4 Sélectionnez l’emplacement géographique souhaité, puis appuyez sur
le bouton central.
5 Réglez [Heure d'été], [Date/heure] et [Format de date], puis sélectionnez
[Entrer] et appuyez sur le bouton central.
Pour reconfigurer la date/heure ou le réglage de la zone ultérieurement,
sélectionnez MENU
(Réglage) [Rég. date/heure] ou [Réglage zone].
Prise de vue
Prise d’images fixes
1 Sélectionnez le mode de prise de
vue souhaité en faisant tourner le
sélecteur de mode.
Déclencheur
Sélecteur de mode
2 Enfoncez le déclencheur à mi-course
pour effectuer la mise au point.
3 Enfoncez complètement le
déclencheur.
ILCE-7C
5-021-708-41(1)
FR
7
\\Win-473\camera\CX88600(NB)_SG\Multi\04_Compose\Printed_in_Thiland\5021708411_14lang\5021708411ILCE7CCEC\02FR-ILCE7CCEC\02FR.indd
DTP data saved: 2020/06/26 08:49
PDF file created: 2020/07/08 09:05
FR
Enregistrement de films
1 Appuyez sur le bouton MOVIE (Film)
pour commencer l’enregistrement.
Lenregistrement de films peut être
lancé depuis n’importe quel mode de
prise de vue par défaut.
Bouton MOVIE (Film)
2 Appuyez à nouveau sur le
bouton MOVIE pour arrêter
l’enregistrement.
Visualisation
1 Appuyez sur le bouton (Lecture)
pour basculer vers le mode lecture.
Bouton (Lecture)
Molette de commande
2 Sélectionnez une image avec la
molette de commande.
Vous pouvez accéder à l’image
précédente/suivante en appuyant
sur le côté gauche/droit de la
molette de commande.
Pour démarrer la lecture d’un film,
appuyez au centre de la molette de
commande.
ILCE-7C
5-021-708-41(1)
FR
8
\\Win-473\camera\CX88600(NB)_SG\Multi\04_Compose\Printed_in_Thiland\5021708411_14lang\5021708411ILCE7CCEC\02FR-ILCE7CCEC\02FR.indd
DTP data saved: 2020/06/26 08:49
PDF file created: 2020/07/08 09:05
Transfert d’images vers un
smartphone
Vous pouvez transférer les images vers un smartphone en connectant
l’appareil et un smartphone via Wi-Fi.
1 : Installez Imaging Edge Mobile sur votre smartphone.
Pour connecter l’appareil et le smartphone, Imaging Edge Mobile est
nécessaire.
Installez au préalable Imaging Edge Mobile sur le smartphone.
Si Imaging Edge Mobile est déjà installé sur votre smartphone, veillez à le
mettre à jour vers la plus récente version.
https://www.sony.net/iem/
2 Connectez l’appareil et votre smartphone en utilisant le QR Code.
: MENU (Réseau) [Fnct Env. vers smart.]
[Env. vers smartphon.] [Sélect. sur ce dispositif] images à
transférer.
Si vous souhaitez sélectionner des images sur le smartphone,
sélectionnez [Sélect. sur smartphone].
: Lancez Imaging Edge Mobile sur votre smartphone et sélectionnez
[Connecter à une nouvelle caméra].
: Scannez le QR Code affiché sur
l’appareil au moyen du smartphone.
3 Les images sélectionnées seront transférées.
/