Yamaha RX-A3010 Инструкция по применению

Бренд: Yamaha

Модель: RX-A3010

Категория: Аудио-видео ресиверы

Тип: Инструкция по применению

Yamaha RX-A3010 — это 9.2-канальный AV-ресивер с поддержкой новейших аудио- и видеоформатов, включая Dolby Atmos и DTS:X. Он также имеет встроенный Wi-Fi и Bluetooth для потоковой передачи музыки с мобильных устройств и оснащен функцией YPAO, которая автоматически калибрует акустику под особенности помещения. С помощью этого ресивера вы сможете создать у себя дома настоящий кинотеатр и наслаждаться любимыми фильмами и музыкой с невероятным качеством звука.

Check that the following accessories are supplied with this product.

You need to separately prepare the following cables to build the system based on this

document.

■ Speaker cables (x 9)

■ HDMI cable (x 2)

■ Audio pin cable (x 1)

■ Digital optical cable or stereo pin cable (x 1) (unnecessary if your TV supports ARC)

1 Preparations

Accessories

■ Remote control ■ Batteries (AAA, LR03, UM-4) (x 4)

Insert into the remote control in the correct polarity (+/-)

■ Simplified remote control ■ Power cable

* The figure of the supplied power cable differs depending

on regions.

■ YPAO microphone ■ Microphone base

* Used for angle

measurement

during YPAO.

■ AM antenna ■ FM antenna

* The figure of the supplied

FM antenna differs

depending on regions.

■

CD-ROM

(Owner’s Manual)

■ Safety Brochure ■ Easy Setup Guide

(this document)

Cables necessary for connections

Easy Setup Guide

English for Canada, Europe, Asia,

Africa, Oceania and Latin America

AV Receiver

This document explains how to set up a 9.1-channel system and

play back surround sound of a BD/DVD on this unit.

For more information, refer to “Owner’s Manual” on the supplied

CD-ROM.

A PDF format of this guide and “Owner’s Manual” can be downloaded

from the following website.

http://download.yamaha.com/

2 En

Set up the speakers in the room by using the following diagram as a reference.

For information on speaker systems other than the 9.1-channel system, refer to “Owner’s Manual”.

2 Placing the speakers

30 cm or more

1.8 m

0.5 to 1 m

1.8 m

0.5 to 1 m

10°~30°10°~30°

Front speaker (L)

Front speaker (R)

Center speaker

Surround speaker (L)

Surround speaker (R)

Surround back speaker (L)

Surround back speaker (R)

Front presence speaker (L)

Front presence speaker (R)

Subwoofer

En 3

Connecting speaker cables

Speaker cables have two wires. One is for connecting

the negative (-) terminal of the unit and the speaker, and

the other is for the positive (+) terminal. If the wires are

colored to prevent confusion, connect the black wire to

the negative and the other wire to the positive.

Remove approximately

10 mm of insulation from

the ends of the speaker

cable, and twist the bare

wires of the cable

together firmly.

b Loosen the speaker

terminal.

c Insert the bare wires of the cable into the gap on the

side (upper right or bottom left) of the terminal.

d Tighten the terminal.

Using a banana plug

(Canada, China, Australia and General models only)

a Tighten the speaker

terminal.

b Insert a banana plug into

the end of the terminal.

Connect the front speakers ( / )

to the FRONT ( / ) and the center

speaker ( ) to the CENTER terminal.

Connect the surround speakers ( /

) to the SURROUND ( / )

terminals.

3 Connecting the speakers/subwoofer

• This unit is configured for 8-ohm speakers at the factory. When

connecting 6-ohm speakers, set the speaker impedance of this

unit to “6 Ω MIN”. For details, see “Setting the speaker

impedance” (p.18) in “Owner’s Manual”.

• Use a subwoofer equipped with built-in amplifier.

• Remove the power cable of this unit from an AC wall outlet and

turn off the subwoofer before connecting the speakers.

• Be careful that the core of the speaker cable does not touch

anything or come into contact with the metal areas of this unit.

This may damage this unit or the speakers. If the speaker

cables short circuit, “CHECK SP WIRES” will appear on the

front display when this unit is turned on.

FRONT

– (black)

+ (red)

FRONT

Banana plug

SPEAKER IMPEDANCE

AUDIO 4

MULTI CH INPUT

ZONE OUT/PRE OUT

AUDIO 3

CENTER

SUBWOOFER

ZONE 2/

F.PRESENCE

ZONE 3/

R.PRESENCE

FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

R L

SURROUND

R L

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

EXTRA SP1EXTRA SP2

SINGLE

This unit (rear)

SPEAKER IMPEDANCE

AUDIO 4

MULTI CH INPUT

ZONE OUT/PRE OUT

AUDIO 3

CENTER

SUBWOOFER

ZONE 2/

F.PRESENCE

ZONE 3/

R.PRESENCE

FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

R L

SURROUND

R L

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

EXTRA SP1EXTRA SP2

SINGLE

This unit (rear)

4 En

Connect the surround back speakers

( / ) to the SURROUND BACK

( / ) terminals.

Connect the front presence speakers

( / ) to the EXTRA SP1 ( / )

terminals.

Connect the subwoofer ( ) to the

SUBWOOFER (1) jack.

SPEAKER IMPEDANCE

AUDIO 4

MULTI CH INPUT

ZONE OUT/PRE OUT

AUDIO 3

CENTER

SUBWOOFER

ZONE 2/

F.PRESENCE

ZONE 3/

R.PRESENCE

FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

R L

SURROUND

R L

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

EXTRA SP1EXTRA SP2

SINGLE

This unit (rear)

SPEAKER IMPEDANCE

AUDIO 4

MULTI CH INPUT

ZONE OUT/PRE OUT

AUDIO 3

CENTER

SUBWOOFER

ZONE 2/

F.PRESENCE

ZONE 3/

R.PRESENCE

FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

R L

SURROUND

R L

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

EXTRA SP1EXTRA SP2

SINGLE

This unit (rear)

SPEAKER IMPEDANCE

AUDIO 4

MULTI CH INPUT

ZONE OUT/PRE OUT

AUDIO 3

CENTER

SUBWOOFER

ZONE 2/

F.PRESENCE

ZONE 3/

R.PRESENCE

FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

R L

SURROUND

R L

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

EXTRA SP1EXTRA SP2

SINGLE

This unit (rear)

Use an audio pin cable to

connect the subwoofer

().

(

SINGLE

)

PRE OUT

CENTER

SUR. BACKSURRUND

FRONT

(

REAR

)

SUBWOOFER

(

FRONT

)

Audio pin

cable

En 5

4 Connecting the external devices

SCENE

MULTI ZONE

HDMI IN

VIDEO AUX

TONE/BALANCEOPTIONON SCREEN

DISPLAYRETURN

STRAIGHT

ENTER

ZONE 2 ZONE 3 ZONE 4

2 3 4

ZONE CONTROL

INFO MEMORY

YPAO MIC

PHONES

SILENT CINEMA

USB

iPod/iPhone

PROGRAM TUNING/CH

PRESET

R OPTICALL AUDIOVIDEOS VIDEO

PURE DIRECT

VOLUMEINPUT

MAIN ZONE

NATURAL SOUND AV RECEIVER RX-A3010

FM AM

RS-232C

SPEAKER IMPEDANCE

75Ω

ANTENNA

(4 RADIO)

AV 1

(1 BD/DVD)

COAXIAL

+12V 0.1A MAX.

AC IN

TRIGGER

OUT

DOCK

B PR

YPB PR

OPTICAL

AV OUT

AV OU T/

ZONE 4

HDMI OUT

ARC

HDMI

(1 BD/DVD)

MONITOR OUT/

ZONE OUT

MONITOR OUT/ZONE OUT

IN OUT

AV 1

AV 3

AV 2 AV 3 AV 4 AV 5 AV 6 AV 7

REMOTE

COMPONENT VIDEO

AV 3 AV 4AV 2

AUDIO 4

MULTI CH INPUT

ZONE OUT/PRE OUT

AUDIO 3AUDIO 2

(3 CD)

AUDIO 1

(2 TV)

CENTER

SUBWOOFER

ZONE 2/

F.PRESENCE

ZONE 3/

R.PRESENCE

FRONT

SURROUND SUR. BACK

SPEAKERS

CENTER FRONT

ZONE 2/ZONE 3/R.PRESENCE

SURROUND BACK

BI–AMP

ZONE 2/ZONE 3/F.PRESENCE/

OPTICAL

COAXIAL

SURROUND

R L

PHONO

NETWORK

AV 2

AV 4

PRE OUT

SUBWOOFER

CENTER

FRONT

SURROUND SUR. BACK

(SINGLE) (FRONT)

(REAR)

GND

EXTRA SP1

EXTRA SP2

SINGLE

(1 BD/DVD)

AV 1

HDMI OUT

ARC

HDMI

OPTICAL

AUDIO 1

(2 TV)

OPTICAL

VOLTAGE SELECTOR

220V-

240V

110V-

120V

Audio out (digital optical or

analog stereo)

HDMI in

HDMI out

BD/DVD player

HDMI (AV1) jack

HDMI OUT 1

jack

AUDIO1

(OPTICAL or AUDIO)

jack

Turn on this unit

This unit (rear)

This unit (front)

To an AC

wall outlet

VOLTAGE SELECTOR

(General model only)

Connect the external devices to this unit.

a Connect the BD/DVD player and this unit with an

HDMI cable.

If the BD/DVD player is currently connected to the

TV directly with an HDMI cable, disconnect the

cable from the TV and connect it to this unit.

b Connect the TV and this unit with another HDMI

cable.

c Connect the TV and this unit with a digital optical

cable or a stereo pin cable.

This connection is required to play back TV audio

on this unit. If your TV supports ARC (Audio Return

Channel), this connection is unnecessary.

d Connect the supplied power cable to this unit and

then to an AC wall outlet.

• For information on how to connect radio antennas or other

external devices, see “SETUP” in “Owner’s Manual”.

Turn on this unit, TV and BD/DVD player.

With the remote control of the TV, switch the

TV input to display the video from this unit.

The connections are complete. Move to the next

page to optimize the speaker settings.

Before connecting the power cable (General model only)

Make sure you set the switch position of VOLTAGE

SELECTOR according to your local voltage. Voltages are AC

110-120/220-240 V, 50/60 Hz.

Opening the front panel door

Press the bottom of the door gently.

6 En

By using the Yamaha Parametric room Acoustic Optimizer (YPAO) function, this unit automatically detects speaker

connections and distances from the listening position, and optimizes the speaker settings such as volume balance and

acoustic parameters to suit your room.

Preparing for YPAO

Optimizing the speaker settings automatically (YPAO)

• During the measuring process, the test tones are output at high volume. Take care

that the test tone does not frighten small children. Also, refrain from using this

function at night when it may be a nuisance to others.

• During the measuring process, you cannot adjust the volume.

• During the measuring process, keep the room as quiet as possible.

• Do not connect headphones.

• If your subwoofer supports the auto-standby function, disable it.

• YPAO measurement is not performed correctly when any obstacles are in the room.

• During the measuring process (about 3 minutes), keep stuff in the corners or

remove it from the room.

Connect the YPAO microphone to the

YPAO MIC jack on the front panel.

The following screen appears on the TV.

• To cancel the operation, disconnect the YPAO microphone

before starting the measurement.

To start the measurement, use the cursor

keys to select “Measure” and press

ENTER.

The measurement will start in 10 seconds.

The following screen appears on the TV when

the measurement finishes.

• If any error message (such as E-1) or warning message (such

as W-2) appears, see “Error messages” (p.55) or “Warning

messages” (p.56) in “Owner’s Manual”.

• If the warning message “W-1:Out of Phase” appears, see “If

‘W-1:Out of Phase’ appears” (next page).

VOLUME HIGH CUT

CROSSOVER/

MIN MAXMIN MAX

[ B ][ A ]

SOURCE

RECEIVER

AUDIO

1 2 3 4

5 6 7

V-A UX

1 2 3 4

MULTI

PHONO

USB NET

TUNER

DOCK

CLASSICAL

LIVE

CLUB

ENTERTAIN

MOVIE

STEREO STRAIGHT

INPUT

PURE

DIRECT

MUTE

SCENE

1 2 3 4

PROGRAM

VOLUME

TV VOL

MUTE

MODE

TOP MENU

RETURN DISPLAY

POP-UP/MENU

TV CH

PRESET

ENTER

ON SCREEN

OPTION

[ B ]

[

]

SOU

RECEIV

TUNER

DOC

This unit (front)

Place the YPAO microphone at ear

height in your listening position. We

recommend using a tripod to adjust the

height. You can use the tripod screws to

fix the microphone in place.

YPAO microphone

Listening position

Ear height

Cursor keys

ENTER

RETURN

Turned on the subwoofer and set

the volume to half. If the

cross-over frequency is

adjustable, set it to maximum.

Turned on the subwoofer and set

the volume to half. If the

cross-over frequency is

adjustable, set it to maximum.

En 7

Use the cursor keys to select

“Save/Cancel” and press ENTER.

Use the cursor keys to select “SAVE” and

press ENTER.

Disconnect the YPAO microphone from

this unit.

Now optimization of the speaker settings is

complete.

Follow the procedure below to check the speaker

connections.

Depending on the type of speakers or room

environment, this message may appear even if the

speakers are connected correctly.

a Use the cursor keys to select “Result” and press ENTER.

b Use the cursor keys to select “Wiring”.

c Check the cable connections (+/-) of the speaker

indicated with “Reverse”.

If the speaker is connected correctly:

You can save the current settings.

Press RETURN and proceed to step 3.

If the speaker is connected incorrectly:

Turn off this unit, reconnect the speaker cable, and then

try YPAO measurement again.

• Since the YPAO microphone is sensitive to heat, do not place

the microphone in any place where it will be subjected to direct

sunlight or high temperatures (top of an AV equipment, etc).

If “W-1: Out of Phase” appears

Now let’s play back a BD/DVD.

We recommend playing back multichannel audio

(5.1-channel or more) to feel surround sound produced

by this unit.

Press AV1 to select “AV1” as the input

source.

Start playback on the BD/DVD player.

Press STRAIGHT repeatedly to select

“STRAIGHT”.

• When “STRAIGHT” (straight decode) is enabled, each

speaker produces each channel audio signal directly (without

sound field processing). If you play back 5.1-channel audio on

the 9.1-channel system, no sounds will be heard from the

surround back and front presence speakers. To check if

sounds are properly heard from all speakers, press STEREO

repeatedly to select “9ch Stereo”.

Press VOLUME to adjust the volume.

Now the basic setup procedure is complete.

Only the front speakers work on multichannel audio

Check the digital audio output setting on the BD/DVD

player.

It may be set to output 2-channel audio (PCM, etc.) only.

No sound is heard from a specific speaker

See “Troubleshooting” (p.139) in “Owner’s Manual”.

6 Playing back a BD/DVD

[ B ][ A ]

SOURCE

RECEIVER

AUDIO

1 2 3 4

5 6 7

V-A UX

1 2 3 4

MULTI

PHONO

USB NET

TUNER

DOCK

CLASSICAL

LIVE

CLUB

ENTERTAIN

MOVIE

STEREO STRAIGHT

INPUT

PURE

DIRECT

MUTE

SCENE

1 2 3 4

PROGRAM

VOLUME

TV VOL

MUTE

MODE

TOP MENU

RETURN DISPLAY

POP-UP/MENU

TV CH

PRESET

ENTER

ON SCREEN

OPTION

[ B ]

[

]

SOU

RECEIV

TUNER

DOC

AV1

STRAIGHT

STEREO

VOLUME

If you cannot have surround sound

OUT

VOLUME

MUTE

DRCADAPTIVE

ZONE

STEREO

ENHANCER

SLEEP

TUNED

PRE

AMP

PAR TY

ZONE

TAG

DOCK

SBLPL SBRSBPR

SW1

SW2SW

CLR

A.Sel:Auto

AV1

SPIMP.-

OUT

VOLUME

MUTE

DRCADAPTIVE

ZONE

STEREO

ENHANCER

SLEEP

TUNED

PRE

AMP

PAR TY

ZONE

TAG

DOCK

SBLPL SBRSBPR

SW1

SW2SW

CLR

A.Sel:Auto

STRAIGHT

SPIMP.-

OUT

VOLUME

MUTE

DRCADAPTIVE

ZONE

STEREO

ENHANCER

SLEEP

TUNED

PRE

AMP

PAR TY

ZONE

TAG

DOCK

SBLPL SBRSBPR

SW1

SW2SW

CLR

Main:Volume

SPIMP.-

Much more features!

This unit has various other functions.

Please refer to “Owner’s Manual” on the

supplied CD-ROM and utilize this unit

effectively.

Connecting other playback

devices (p.37)

Connect audio devices (CD player, etc.), game

console, camcorder, and many others.

Selecting the sound mode

(p.60)

Select the desired sound program (CINEMA

DSP) or surround decoder suitable for movies,

music, games, sports programs and other uses.

Playing back from iPod (p.70)

By using a USB cable supplied with iPod, an

optional Yamaha iPod dock or an optional

Yamaha iPod wireless system, you can enjoy

iPod music on this unit.

■ Listening to FM/AM radio (p.65)

■ Playing back music stored on a USB

storage device (p.77)

■ Playing back the network contents

(p.80 to p.83)

■ Selecting the input source and

favorite settings at once (p.58)

For more information, see “What you can do

with this unit” (p.6).

Yamaha RX-A3010 Инструкция по применению

Бренд: Yamaha

Модель: RX-A3010

Категория: Аудио-видео ресиверы

Тип: Инструкция по применению

Скачать PDF

сообщить о нарушении

на других языках

English: Yamaha RX-A3010 Owner's manual
français: Yamaha RX-A3010 Le manuel du propriétaire
italiano: Yamaha RX-A3010 Manuale del proprietario
español: Yamaha RX-A3010 El manual del propietario
Deutsch: Yamaha RX-A3010 Bedienungsanleitung
Nederlands: Yamaha RX-A3010 de handleiding
português: Yamaha RX-A3010 Manual do proprietário
dansk: Yamaha RX-A3010 Brugervejledning
svenska: Yamaha RX-A3010 Bruksanvisning
Türkçe: Yamaha RX-A3010 El kitabı
suomi: Yamaha RX-A3010 Omistajan opas
română: Yamaha RX-A3010 Manualul proprietarului

Yamaha RX-A3010 Инструкция по применению

Yamaha RX-A3010 Инструкция по применению

на других языках

Похожие модели бренда