Yamaha M7CL Инструкция по применению

M7CL V3 Editor Owner’s Manual

1

Special Notices

•The software and this owner’s manual are the exclu-

sive copyrights of Yamaha Corporation.

•Copying of the software or reproduction of this

manual in whole or in part by any means is expressly

forbidden without the written consent of the manu-

facturer.

•Copying of the commercially available music

sequence data and/or digital audio ﬁles is strictly

prohibited except for your personal use.

•Yamaha makes no representations or warranties

with regard to the use of the software and documen-

tation and cannot be held responsible for the results

of the use of this manual and the software.

•The screen displays as illustrated in this owner’s

manual are for instructional purposes, and may

appear somewhat different from the screens which

appear on your computer.

•For information on modiﬁcation of system soft-

ware, certain functions, or speciﬁcations due to ver-

sion update of the application, please visit the

following website:

http://www.yamahaproaudio.com/

•Windows is a registered trademark of Microsoft

Corporation in the U.S. and other countries.

•Apple, Mac and Macintosh are trademarks of Apple

Inc., registered in the U.S. and other countries.

•The company names and product names in this

Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

❏

Yamaha Pro Audio Global Site

http://www.yamahaproaudio.com/

Contents

Getting Started ......................................... 2

Master window ....................................... 13

Overview window ................................... 16

Selected Channel window....................... 29

Library window ....................................... 49

Patch Editor window............................... 52

Rack window ........................................... 56

Meter window ......................................... 65

Group/Link window ................................ 67

Scene window ......................................... 71

User Defined Keys Setup window........... 78

Sends On Fader window ......................... 79

Output Port window ............................... 80

Keyboard Shortcuts................................. 82

Index........................................................ 83

*Speciﬁcations and descriptions in this owner ’s manual are

for information purposes only. Yamaha Corp. reserves the

right to change or modify products or speciﬁcations at any

time without prior notice.

M7CL V3 Editor

Owner’s Manual

Version 3.5

Description of menus and buttons

In the event that menu and button names on a Windows

system are different from those on a Mac, this manual

uses the Windows menu and button names followed by the

Mac menu and button names in parentheses.

M7CL V3 Editor Owner’s Manual

2

Overview of M7CL V3 Editor

M7CL V3 Editor (hereinafter called “M7CL Editor” in this document) enables you to remotely control a Yamaha

M7CL mixing console (Version 3) (such as M7CL-48ES, M7CL-48, or M7CL-32; hereinafter collectively called

“M7CL” in this document). M7CL Editor also enables you to save the parameter settings on your computer. To use

M7CL Editor, you must ﬁrst perform the following operations:

1 Start and conﬁgure Studio Manager.

2 Start and conﬁgure M7CL Editor.

3 Synchronize M7CL Editor with your M7CL console (

➥

p.12).

For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.

Conﬁguring M7CL Editor

You must conﬁgure the following settings for each open Editor.

• Before you make the following settings, you must make settings for the DME-N Network Driver (Windows)

or the Network-MIDI Driver (Mac) and select the MIDI port in the Setup window of Studio Manager.

•To open an editor, double-click the icon for the desired editor in the Studio Manager window.

❏

System Setup

To open the System Setup dialogbox, choose [System Setup] from the [File] menu.

Be sure to specify the Input port and Output port.

A

Input port/Output port

From the ports you speciﬁed in Studio Man-

ager, select the ports that the editor will use

to communicate with the M7CL console.

B

Model Select

This section enables you to make settings for

the M7CL model you are using.

M7CL-32/M7CL-48/M7CL-48ES

Select the model of your M7CL. If M7CL

Editor is synchronized with the M7CL con-

sole, the model will automatically be selected

and other model options will be grayed out.

Stage Box Data Conversion

Converts HA settings and input patch set-

tings accordingly if, for example, you want to

use (on an M7CL-48ES system) data stored

by a system that features SB168-ES units

connected to M7CL-48 slots.

Click the [Conversion…] button to display

the Stage Box Data Conversion dialog box for

conversion. (

➥

p.8)

Getting Started

NOTE

1

2

3

4

5

6

9

7

8

M7CL V3 Editor Owner’s Manual

3

C

Channel Select / Sends On Fader

This checkbox enables you to specify whether or not the M7CL console and M7CL Editor are linked to each other

for the following operations:

• Selecting channels

• Switching between normal mode and SENDS ON FADER mode

• Switching between MIX and MATIRX in SENDS ON FADER mode

If you do not check the box, the M7CL console and M7CL Editor will operate independently.

D

Fast Sync

This allows synchronization to be speed up, reducing the time required. Check this box to enable the function.

E

Window Control From Console

This option determines whether or not using the USER DEFINED KEYS on the console enables you to remotely

open and close the M7CL Editor windows.

F

Level Meter

By disabling the meter function you can reduce the processing load caused by screen drawing and communica-

tion. This option speciﬁes whether the level meter functionality will be enabled.

G

Conﬁrmation

These check boxes specify whether a conﬁrmation dialog box will appear when you store (Store Conﬁrmation),

recall (Recall Conﬁrmation), patch (Patch Conﬁrmation), or make a patch change that would modify an existing

patch (Steal Patch Conﬁrmation).

H

Administrator Password

Enter the Administrator password that was speciﬁed on the M7CL console. If this password is not entered cor-

rectly, it will not be possible to synchronize from M7CL Editor to the M7CL console.

I

Set Default

Press this button to use the settings currently speciﬁed in the System Setup dialog box as the default settings. The

next time when you start up M7CL Editor, it will use these settings.

M7CL V3 Editor Owner’s Manual

4

❏

Mixer Setup

To open the Mixer Setup dialogbox, choose [Mixer Setup] from the [File] menu.

A

Mix Bus Setup

Here you can make settings relating to the MIX buses.

Signal Type:

Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MIX

buses.

Bus Type/Send Point:

Choose either VARI (PRE FADER) or VARI (PRE EQ) or FIXED for each two adja-

cent odd-numbered/even-numbered MIX buses.

Pan Link:

The PAN setting for signals sent to stereo MIX buses will link to the PAN setting for the STEREO bus.

This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI.

B

Matrix Bus Setup

Here you can make settings relating to the MATRIX buses.

Signal Type:

Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered

MATRIX buses.

Send Point for Input Channels:

Choose either PRE FADER or PRE EQ for each two adjacent odd-num-

bered/even-numbered MATRIX buses.

Pan Link:

The PAN setting for signals sent to stereo MATRIX buses will link to the PAN setting for the STEREO

bus. This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI.

1

2

M7CL V3 Editor Owner’s Manual

5

❏

Creating a user key

To open the Create User Key dialogbox, choose [Create User Key] from the [File] menu.

This creates a user key (with “.M7U” ﬁle name extension) that can be read from a USB storage device by the

M7CL console to automatically set user-speciﬁc parameters.

A

User Name

Specify the name of the user. You can enter up to eight single-byte alphanumeric characters. Lowercase characters

will automatically become uppercase on the M7CL console.

B

Comment

Enter a comment for each user. You can enter up to thirty-two single-byte alphanumeric characters.

C

Password

Enter a password that will be used when this user key is read by the M7CL console. You can enter up to eight sin-

gle-byte alphanumeric characters. Uppercase and lowercase are distinguished.

D

Re-Enter Password

Enter the password once again as a safeguard against mistaken entry.

E

POWER USER

Specify whether this user is a power user. Power users can use the M7CL console to create or edit a user authenti-

cation key with a speciﬁed user level.

F

Administrator Password

Enter the Administrator password that was speciﬁed on the M7CL console. This is not required if no Administra-

tor password has been speciﬁed on the M7CL console, but if this password is incorrect you will be asked to enter

it when the user key is read.

2

1

3

4

6

5

7

8

9

J

K

O P

L

N

M

M7CL V3 Editor Owner’s Manual

6

G

ACCESS PERMISSION

In this area, specify the parameters that this user will be allowed to operate.

H

CH OPERATION

INPUT, ST IN, DCA, MIX, MATRIX, ST/MONO:

Select the channels whose parameters will be opera-

ble.

HA:

Change the operating privileges for the head amp gain and phantom power of the selected channels.

PROCESSING:

Change the operating privileges for overall signal processing parameters (except for fader

and [ON] key) of the selected channel. For the speciﬁc parameters included in PROCESSING, refer to the

appendix of the M7CL owner’s manual.

FADER/ON:

Change the operating privileges for the pan/balance, fader, channel on, send on/off, and send

level of the selected channels.

Set All:

Turn on HA, PROCESSING, and FADER/ON for all channels.

Clear All:

Turn off HA, PROCESSING, and FADER/ON for all channels.

Set by One Click:

If this button is on, pressing the channel select button repeatedly will set HA, PRO-

CESSING, and FADER/ON to On or Off simultaneously.

I

SCENE LIST

STORE/SORT:

Change the operating privileges for scene store and sort operations.

RECALL:

Change the operating privileges for scene recall operations.

J

LIBRARY LIST

STORE/CLEAR:

Change the operating privileges for library store and clear operations.

RECALL:

Change the operating privileges for library recall operations.

K

FILE LOAD

USER SETUP:

Change the operating privileges for loading user-deﬁned keys and preferences when loading a

ﬁle.

SYSTEM SETUP MONITOR SETUP:

Change the operating privileges for loading system setup and moni-

tor setup settings when loading a ﬁle.

CURRENT SCENE:

Change the operating privileges for loading the current scene when loading a ﬁle.

SCENE LIST:

Change the operating privileges for loading the scene list when loading a ﬁle.

LIBRARY LIST: Change the operating privileges for loading the library list when loading a ﬁle.

L CURRENT SCENE

INPUT PATCH: Change the operating privileges for input patch operations.

INPUT NAME: Change the privileges for editing the input names.

OUTPUT PATCH: Change the operating privileges for output patching.

OUTPUT NAME: Change the privileges for editing the output names.

BUS SETUP: Change the operating privileges for buses.

RACK 1-8: Change the operating privileges for rack operations.

MUTE GROUP ASSIGN: Change the privileges for assigning mute groups.

MUTE GROUP MASTER: Change the operating privileges for enabling/disabling mute groups.

M MONITOR SETUP

OSCILLATOR: Change the operating privileges for oscillator settings.

TALKBACK: Change the operating privileges for talkback settings.

N SYSTEM SETUP

MIXER SETUP: Change the privileges for making mixer setup settings.

OUTPORT SETUP: Change the privileges for making outport setup settings.

MIDI: Change the privileges for making MIDI settings.

O Create

Creates the user key.

P Cancel

Closes the dialogbox.

M7CL V3 Editor Owner’s Manual

7

Working with Sessions

All of your console’s mix settings in M7CL Editor, including Scene and library data, are called Sessions.

The following table describes how to handle Sessions.

When you save a session in the window of an editor, the settings of only that editor will be saved in a ﬁle. Session ﬁles

saved by M7CL Editor have a ﬁlename extension of “.YSE”. Files in which only the M7CL console data is saved (ﬁle-

name extension “.M7C”) can also be handled, allowing you to use a USB storage device to exchange data with the

M7CL console.

If you save a Session in the Studio Manager window, all selected Editor settings are saved in a ﬁle with a ﬁle extension

of “.YSM.”

With M7CL V3 Editor, you can also open ﬁles that have been saved on any version of M7CL console or

Editor other than version 3 if the ﬁles feature the extension “.M7C” or “.YSE”. However, once you save

these ﬁles on the M7CL V3 console or Editor, you will not be able to open them on the other version of

M7CL console or Editor.

If you use the M7CL-48ES console to open a session saved via the M7CL-32/48 console, or if you use the

M7CL-32/48 console to open a session saved via the M7CL-48ES, the patch settings will change and the

same HA settings will be used as follows:

(*) The same HA settings will be used.

Creating a new Session

Choose [New Session] from the [File] menu.

Opening a previously saved Session

Choose [Open Session] from the [File] menu.

Saving the current Session

Choose [Save Session] from the [File] menu.

Saving the current Session with a new name

Choose [Save Session As...] from the [File] menu.

M7CL-32/48 M7CL-48ES

INPUT 1-16

↔

(

*

)

ES IN 1-16

INPUT 17-32

↔

(

*

)

ES IN 17-32

INPUT 33-48

↔

(

*

)

ES IN 33-48

ST IN 1L-4R

↔

(

*

)

OMNI IN 1-8

SLOT1 IN 1-16

↔

(

*

)

SLOT1 IN 1-16

SLOT2 IN 1-16

↔

(

*

)

SLOT2 IN 1-16

SLOT3 IN 1-16

↔

(

*

)

SLOT3 IN 1-16

TALKBACK

↔

TALKBACK

OMNI OUT 1-16

↔

ES OUT 1-16

No assignment

↔

ES OUT 17-24

No assignment

↔

OMNI OUT 1-8

SLOT1 OUT 1-16

↔

SLOT1 OUT 1-16

SLOT2 OUT 1-16

↔

SLOT2 OUT 1-16

SLOT3 OUT 1-16

↔

SLOT3 OUT 1-16

2TR DIGITAL OUT

↔

2TR DIGITAL OUT

NOTE

M7CL V3 Editor Owner’s Manual

8

Stage Box Data Conversion

To open the Stage Box Data Conversion dialog box, click the [Stage Box Data Conversion] button in the System Setup

dialog box.

Use this dialog box to convert HA settings and input patch settings accordingly if, for example, you want to use (on an

M7CL-48ES system) data stored by a system that features SB168-ES units connected to M7CL-48 slots.

A M7CL using External HA via Slot ➞

M7CL-48ES

Converts the patch settings as follows:

(*) The same HA settings will be used.

1

2

3

4

5

1

2

3

4

Internal HA

M7CL-48

Analog devices

M7CL-48

(With MY16-ES64 and

MY16-EX installed)

3 x SB168-ES

EXT-ES HA

M7CL-48ES

INPUT 1-16

→

(

*

)

SLOT1 IN 1-16

INPUT 17-32

→

(

*

)

SLOT2 IN 1-16

INPUT 33-48

→

(

*

)

SLOT3 IN 1-16

ST IN 1L-4R

→

(

*

)

OMNI IN 1-8

SLOT1 IN 1-16

→

(

*

)

ES IN 1-16

SLOT2 IN 1-16

→

(

*

)

ES IN 17-32

SLOT3 IN 1-16

→

(

*

)

ES IN 33-48

TALKBACK → TALKBACK

OMNI OUT 1-16 → SLOT1 OUT 1-16

SLOT1 OUT 1-16 → ES OUT 1-16

SLOT2 OUT

1-8 → ES OUT 17-24

9-16 → OMNI OUT 1-8

No assignment

→

SLOT2 OUT 1-16

SLOT3 OUT 1-16

→

SLOT3 OUT 1-16

2TR DIGITAL OUT

→

2TR DIGITAL OUT

M7CL V3 Editor Owner’s Manual

9

B M7CL using External HA via Slot ➞

Using Internal HA

Converts the patch settings as follows:

(*) The same HA settings will be used.

C M7CL using Internal HA ➞ Using

External HA via Slot

Converts the patch settings as follows:

(*) The same HA settings will be used.

D M7CL-48ES ➞ Using External HA via

Slot

Converts the patch settings as follows:

(*) The same HA settings will be used.

E [Convert] button

Converts the session using one of the conversion

patterns

1 – 4.

SLOT1 IN 1-16

→

(

*

)

INPUT 1-16

SLOT2 IN 1-16

→

(

*

)

INPUT 17-32

SLOT3 IN 1-16

→

(

*

)

INPUT 33-48

ST IN 1L-4R

→

(

*

)

ST IN 1L-4R

INPUT 1-16

→

(

*

)

SLOT1 IN 1-16

INPUT 17-32

→

(

*

)

SLOT2 IN 1-16

INPUT 33-48

→

(

*

)

SLOT3 IN 1-16

TALKBACK → TALKBACK

SLOT1 OUT 1-16 → OMNI OUT 1-16

OMNI OUT 1-16 → SLOT1 OUT 1-16

SLOT2 OUT 1-16 → SLOT2 OUT 1-16

SLOT3 OUT 1-16 → SLOT3 OUT 1-16

2TR DIGITAL OUT

→

2TR DIGITAL OUT

INPUT 1-16

→

(

*

)

SLOT1 IN 1-16

INPUT 17-32

→

(

*

)

SLOT2 IN 1-16

INPUT 33-48

→

(

*

)

SLOT3 IN 1-16

ST IN 1L-4R

→

(

*

)

ST IN 1L-4R

SLOT1 IN 1-16

→

(

*

)

INPUT 1-16

SLOT2 IN 1-16

→

(

*

)

INPUT 17-32

SLOT3 IN 1-16

→

(

*

)

INPUT 33-48

TALKBACK → TALKBACK

OMNI OUT 1-16 → SLOT1 OUT 1-16

SLOT1 OUT 1-16 → OMNI OUT 1-16

SLOT2 OUT 1-16 → SLOT2 OUT 1-16

SLOT3 OUT 1-16 → SLOT3 OUT 1-16

2TR DIGITAL OUT

→

2TR DIGITAL OUT

SLOT1 IN 1-16 →(*) INPUT 1-16

SLOT2 IN 1-16 →(*) INPUT 17-32

SLOT3 IN 1-16 →(*) INPUT 33-48

OMNI IN 1-8

→

(

*

)

ST IN 1L-4R

ES IN 1-16

→

(

*

)

SLOT1 IN 1-16

ES IN 17-32

→

(

*

)

SLOT2 IN 1-16

ES IN 33-48

→

(

*

)

SLOT3 IN 1-16

TALKBACK → TALKBACK

SLOT1 OUT 1-16 → OMNI OUT 1-16

ES OUT 1-16 → SLOT1 OUT 1-16

ES OUT 17-24 →

SLOT2 OUT

1-8

OMNI OUT 1-8 → 9-16

SLOT2 OUT 1-16

→

No assignment

SLOT3 OUT 1-16 → SLOT3 OUT 1-16

2TR DIGITAL OUT → 2TR DIGITAL OUT

M7CL V3 Editor Owner’s Manual

10

Undo/Redo Function

In M7CL Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest operation

(Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you per-

form an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can

cancel multiple recent operations.

The following table describes how to use the Undo/Redo function.

Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo

any previous operation:

•Operations on the M7CL console

• Quitting Studio Manager

•Synchronizing with the M7CL console

•Session operations

You cannot Undo or Redo the following operations:

• Edits in the Setup window

• Synchronization

• Opening and closing the windows

• Resizing or moving the windows

• Stage Box Data Conversion

There are certain other operations that cannot be undone, depending on the function.

For library or scene operations, Undo/Redo applies only to the single most recent operation. You cannot

undo any operations prior to this. Undo/Redo in these windows is available only using the [UNDO] button

within the respective window. Even if you perform a scene recall from the Master window, you cannot use

a shortcut or menu operation to undo the recall.

Undo

Choose [Undo] from the [Edit] menu.

Redo

Choose [Redo] from the [Edit] menu.

NOTE

M7CL V3 Editor Owner’s Manual

11

Window operations

You can select and open each window from the [Win-

dows] menu. For the INPUT CH window and Effect Edi-

tor window, use the sub-menu to select the channels or

library you want to see.

You can choose Tile or Cascade to arrange the windows within the editor.

In the Library window or Scene window, click the tabs

located at the top of the window to switch between

pages.

● Cascade● Tile

M7CL V3 Editor Owner’s Manual

12

Synchronizing M7CL Editor

When M7CL Editor starts up, the parameter settings on the console and the parameter settings in M7CL Editor may

be different. Therefore, you must ﬁrst match the parameter settings on the console with those in M7CL Editor. This

operation is called “synchronization.” Follow the steps below to synchronize M7CL Editor.

1 Select [Synchronize], then [Re-synchronize].

The following window opens.

2 Select whether you want to transfer your settings to M7CL

Editor, or vice versa.

At this time, the All Libs option determines whether or not Scene and

Library data is synchronized.

PC ➔ Console: Tr ansfers the current parameter settings in M7CL Editor to your console. On the M7CL-48ES,

the [Stage Box Setup] checkbox will appear. If you want to keep the Stage Box Setup setting of the M7CL-48ES

unit, remove the check from the checkbox.

Console ➔ PC: Tr ansfers the current parameter settings of your console to the M7CL Editor.

3 Click [OK].

Do not operate the console while synchronization is in progress.

If you use the “Recall” function in Studio Manager, all selected Editors in Studio Manager are synchro-

nized with the corresponding devices.

Ofﬂine Edit Function

If you do not want to synchronize your console with M7CL Editor, select [Ofﬂine Edit] from the [Synchronization]

menu. To apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC

-> Console option to synchronize the console with M7CL Editor.

The Offline Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the

window.

Some effect parameters in the console change their displayed values depending on the sampling fre-

quency. If you switch M7CL Editor from OFFLINE to ONLINE, displayed parameter values may change

because M7CL Editor loads the sampling frequency from the console and updates the display.

Other Functions

❏

Resetting to the default value (Ctrl( )+click)

Move the cursor to a control or a parameter value, then hold down the <Ctrl>(< >) key and click the mouse

button to reset the value to the default (e.g., to reset a pan setting to Center).

–

∞

❏

Ctrl( )+Shift+Click

Move the mouse cursor to a channel fader or to a send knob or bar graph, and click while holding down the

<Ctrl>(< >) key and <Shift> key to set the nominal value regardless of the default value.

NOTE

M7CL V3 Editor Owner’s Manual

13

In the Master window you can synchronize to the M7CL itself, recall scenes, and display the Overview window. To

open this window, choose [Master] from the [Windows] menu.

❏

CHANNEL SELECT

This indicates the number and name of the channel to which your operations will apply. To

switch channels, you can either click the [SELECT] button and choose from the list that

appears, or you can click the left/right arrow-shaped channel select buttons. You can also

use the channel name text box to edit the name.

If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is selected,

this parameter is linked with the [SEL] keys on the M7CL console panel.

You can right-click (<control> key + click) the icon to select a different one.

❏

SENDS ON FADER

This button indicates whether normal mode or SENDS ON FADER mode is engaged.

Click the button to switch modes. When SENDS ON FADER mode is engaged, the Sends

On Fader window appears. (➥ p.79)

If the Channel Select / Sends On Fader checkbox in the System Setup dialog box is selected,

this parameter will be linked with the SEND ON FADER mode setting on the M7CL con-

sole.

Master window

M7CL V3 Editor Owner’s Manual

14

❏ SYNC

This indicates the status of connection and synchronization between M7CL Editor and the M7CL.

A [ONLINE]/[OFFLINE] button

The ONLINE/OFFLINE status will alternate each time you click this button.

This has the same function as [Synchronization] menu ➔[Ofﬂine Edit]. (➥ p.12)

This indicator is shown when M7CL Editor is correctly con-

nected to the M7CL itself. In this state, the parameters of M7LC

Editor and the M7CL itself are linked.

This indicator is shown when M7CL Editor and the M7CL itself

are not connected, or when there is a problem with the connec-

tion, or when Ofﬂine Edit is selected. In this state, the parame-

ters of M7CL Editor and the M7CL itself are not linked.

B [RE-SYNC] button

Clicking this button opens the Synchronization dialog box.

This has the same function as [Synchronization] menu ➔ [Re-Synchronize]. (➥ p.12)

❏ SCENE MEMORY

Here you can view the currently-recalled scene, and recall or store scenes.

A Scene number display

Indicates the number of the scene that is selected for store or recall.

B Protect indicator

The lock icon is displayed for scenes that are protected. You will be unable to overwrite

or modify the titles of such scenes. For read-only scenes, “R” appears instead.

C Edit indicator

The edit indicator will light when you edit the parameters after recalling a scene.

D [STORE] button

This button stores the current scene into the number shown by the scene number dis-

play (

1).

E [▲]/[▼] buttons

These buttons increment or decrement the number shown in the scene number display

(

1). The scene number display (1) will blink until you actually store or recall, and

while blinking will not match the scene number indicated on the M7CL.

F [RECALL] button

This button recalls the scene of the number shown in the scene number display (1).

1 2

1

4

3

5

6

2

M7CL V3 Editor Owner’s Manual

15

❏ Navigation Keys

Opens the corresponding window in the Overview window.

These are not linked with the navigation key section on the panel of the M7CL itself.

A [17-32] button

Opens the INPUT CH 17–32 window.

B [1-16] button

Opens the INPUT CH 1–16 window.

C [ST IN] button

Opens the ST IN window.

D [DCA] button

Opens the DCA window.

E [STEREO] button

Opens the STEREO/MONO window.

F [MIX] button

Opens the MIX window.

G [MTRX] button

Opens the MATRIX window.

H [33-48] button

Opens the INPUT CH 33–48 window. This button is available during ofﬂine editing

only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It is also

available during online editing for the M7CL-48 or M7CL-48ES.

NOTE

1

2

3

4

876

5

M7CL V3 Editor Owner’s Manual

16

INPUT CH window

This window displays the mix parameters of INPUT CH 1–16, 17–32, or 33–48

(

*

)

. The parameters shown in the

window can be selected from the [View] menu or the menu that appears when you right-click (<control> key +

click) in the window.

You can access this window in the following ways.

● From the [Windows] menu, choose [Overview] and select “CH1-16” / “CH17-32” / “CH33-48”

(

*

)

●

Use the navigation keys in the Master window to turn on the [1-16] button / [17-32] button / [33-48] button

(

*

)

●

On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48]

(

*

)

in [INPUT CH] of [M7CL

EDITOR CONTROL], and execute the function

(

*

)

INPUT CH 33-48 can be viewed during ofﬂine editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog

box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES.

A Input patch

Click here to select the input source that will be assigned to the INPUT CH, from the

following choices.

(*) AD33-48(INPUT jack 33-48) can be viewed during ofﬂine editing only if “M7CL-48” or “M7CL-48ES”

is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48

or M7CL-48ES.

B HA GAIN

Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-

nal head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH.

C 48V

Switches on/off the phantom power (+48V) of the internal head amp or of the external

head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the INPUT CH.

NONE No assignment

IN1–IN48

(

*

)

INPUT jacks 1–48

(

*

)

STIN1L–STIN4R L/R channels of ST IN jacks 1–4

SLOT1-1, SLOT1-2...SLOT3-15, SLOT3-16

Input channels of an I/O card installed in slots 1–3

RACK1A, RACK1B...RACK8R(B) L/R outputs of Rack 1–8

Overview window

1

2

3

M7CL V3 Editor Owner’s Manual

17

D Ø (Phase)

Inverts the phase of the signal after AD conversion.

E HPF (High Pass Filter)

Switches the high pass ﬁlter on/off. You can drag the numeric value up or down to edit

the cutoff frequency.

F INS (Insert)

Enables/disables the insert-in.

G D. OUT (Direct out)

Enables/disables the direct output.

H EQ (Equalizer)

Switches the EQ on/off. The graph immediately below the button shows the approxi-

mate response of the EQ. Double-click within the graph to open the Selected Channel

window of the corresponding channel. To open the Selected Channel window as an

additional view, hold down the <Ctrl>(< >) key of your computer keyboard and

double-click the graph.

I DYN1/DYN2 (Dynamics 1/Dynamics 2)

Tur ns the two dynamics processors on/off.

If Gate is assigned (Dynamics 1 only), the status of the gate is shown immediately below

the button.

If something other than Gate is assigned, a GR meter is shown immediately below the

button, and the amount of gain reduction is shown while this is on.

The type for each dynamics processor can be selected in the Selected Channel window.

Double-click anywhere other than the DYN1 or DYN2 button to open the Selected

Channel window of the corresponding channel. To open the Selected Channel window

as an additional view, hold down the <Ctrl>(< >) key of your computer keyboard

and double-click anywhere other than the DYN1 or DYN2 button.

J MIX/MATRIX SEND

Switches between the send indications to MIX buses

1–16 and to MATRIX buses 1–8.

The bar graphs located immediately below the button

show the send level of the signals sent from the INPUT

CH to VARI type MIX/MATRIX buses. You can also

drag the bar graph to left or right to set the send level.

While you drag the bar graph, the send level is shown

in the numerical display area for PAN/TO STEREO

MONO (

K).

You can set the minimum value (–∞ dB) by holding

down the <Ctrl>(< >) key of your computer key-

board and clicking the bar graph, or set the nominal

value (0.00 dB) by holding down the <Ctrl>(< >)

key and <Shift> key and clicking the bar graph.

The bar graph display will change according to the

send position (pre/post) and on/off status of the signal

sent from the INPUT CH to the MIX/MATRIX buses.

To switch a send on/off, click the channel number

located at the left of the bar graph.

For FIXED-type MIX buses, the bar graph is ﬁxed at nominal level (0 dB),

and only the on/off status is shown.

In SENDS ON FADER mode, this button enables you to adjust the send

level using the fader.

Gate status

indication

On/off status On On On Off

Open/closed

status

Closed Open Open —

Remarks

Gain reduction amount

is 30 dB or more

Gain reduction

amount is 0–30 dB

Gain reduction

amount is 0 dB

—

4

6

7

8

5

9

J

• Pre/on (green)

• Pre/off (green)

• Post/on (yellow)

• Post/off (yellow)

NOTE

M7CL V3 Editor Owner’s Manual

18

K PAN/TO STEREO MONO

The PAN knob adjusts the panning of the signal that is sent from the INPUT CH to the

STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value

by holding down the <Ctrl>(< >) key of your computer keyboard and clicking this

knob.

The [ST] button is an on/off switch for the signal that is sent from the INPUT CH to

the STEREO bus.

The [M(C)] button is an on/off switch for the signal that is sent from the INPUT CH to

the MONO bus.

If LCR MODE is selected in the Selected Channel window, the [LCR] button will appear

instead of the [ST] button and [M(C)] button, and the [LCR] button will be an on/off

switch for the signal that is sent from the INPUT CH to the LCR bus.

L SEL (Select)

Selects the INPUT CH for which you want to perform operations. This is linked with

the INPUT section [SEL] keys on the M7CL console panel.

If the Channel Select / Sends On Fader checkbox in the System Setup dia-

log box is not checked, this will not be linked with the M7CL console.

M CUE

This button cue-monitors the signal of the INPUT CH. This is linked with the INPUT

section [CUE] keys on the M7CL’s panel.

If the Channel Select / Sends On Fader checkbox in the System Setup dia-

log box is not checked, this will not be linked with the M7CL console.

N ON

Switches the INPUT CH or send on/off. In normal mode, this button is linked with the

CH [ON] key in the INPUT section on the M7CL console panel.

The button is color-coded and indicates status as follows:

White: INPUT CH is on (normal mode)

Black: INPUT CH/Send are off.

Other colors: Send is on (SENDS ON FADER mode).

O Fader

Adjusts the input level of the INPUT CH, or the send level. In normal mode, this fader

is linked with the fader in the INPUT section on of the M7CL console panel.

The fader is color-coded and indicates status as follows:

White: You can adjust the input level of the INPUT CH (normal mode).

Gray: INPUT CH is off.

Other colors: You can adjust the send level (SENDS ON FADER mode).

The current fader value is shown in the numerical box located immediately below the

fader.

You can set this to the minimum value (–∞ dB) by holding down the <Ctrl>(< >) key

of your computer keyboard and clicking the fader knob, or set it to the nominal value

(0.00 dB) by holding down the <Ctrl>(< >) key and <Shift> key and clicking the

fader knob.

L

M

N

P

O

Q

K

NOTE

M7CL V3 Editor Owner’s Manual

19

The numbers and alphabetical let-

ters at the right of the fader indicate

the DCA group and mute groups to

which that channel belongs, and

show the Recall Safe and Mute Safe

status of the channel.

P Channel number

This is the number of the INPUT CH. You can open the Selected Channel window for

this channel by double-clicking this number. If you hold down the <Ctrl>(< >) key of

your computer keyboard and double-click this, the Selected Channel window will open

as an additional view.

Q Channel name

This is a text box that displays the channel name. You can also edit the channel name in

this text box.

The numbers of DCA groups

to which this channel belongs

are shown in yellow.

The numbers of mute groups to

which this channel belongs are

shown in red.

If this channel is set to

Recall Safe, the R character

is shown in green.

If this channel is set to Mute

Safe, the M character is

shown in green.

M7CL V3 Editor Owner’s Manual

20

ST IN window ( M7CL-32/M7CL-48 only)

In this window you can view and edit the mix parameters of ST IN channels 1–4. The parameters shown in the win-

dow can be selected from the [View] menu or the menu that appears when you right-click (<control> key + click) in

the window.

You can access this window in the following ways.

● From the [Windows] menu, choose [Overview] and then choose “ST IN”

● Use the navigation keys in the Master window to turn on the [ST IN] button

A INPUT PATCH

Selects the input source that will be assigned to the ST IN channel. The input sources

that can be assigned are the same as for an INPUT CH (➥ p.16).

B HA GAIN

Drag the knob in the screen to adjust the gain of the internal head amp or of the exter-

nal head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel.

C 48V

Switches on/off the phantom power (+48V) of the internal head amp or of the external

head amp (e.g., Yamaha AD8HR, SB168-ES) patched to the ST IN channel.

D Ø (Phase)

Inverts the phase of the signal after AD conversion.

E HPF (High Pass Filter)

Switches the high pass ﬁlter on/off. You can drag the numeric value up or down to edit

the cutoff frequency.

F EQ (Equalizer)

Switches the EQ on/off (the L/R settings are linked). This is the same as the equalizer for

INPUT CH (➥ p.17).

6

2

3

4

1

5

Страница загружается...

Yamaha M7CL, V3 Инструкция по применению

Похожие модели бренда

Модели других брендов